Sharp XV-Z10000 (serv.man29) User Manual / Operation Manual ▷ View online
Connections and Setup
Connections and Setup
-16
Connecting the Projector to Other Devices
Before Connecting
Note
•
Before connecting, be sure to turn off both the projector and the devices to be connected. After making all
connections, turn on the projector and then the other devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connections are
made.
connections, turn on the projector and then the other devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connections are
made.
•
Be sure to read the operation manuals of the devices to be connected before making connections.
This projector can be connected to:
Video equipment:
■ A VCR, Laser disc player or other video equipment (See page 17.)
■ A DVD player or DTV* decoder (See page 18.)
*DTV is the umbrella term used to describe the new digital television system in the United States.
A computer using:
■ DVI to 15-Pin D-sub adapter (See page 21.)
■ A DVI cable (See page 22.)
■ An RS-232C cable (AN-C10RS) (See page 23.)
Connecting the Power
Cord
Cord
Plug in the supplied power cord into
the AC socket on the rear of the pro-
jector.
the AC socket on the rear of the pro-
jector.
Power cord
Supplied
accessory
accessory
-16
Connections and Setup
-17
Connecting to Video Equipment
S-video cable (commercially available)
Connecting to Video
Equipment Using an
S-video or a Composite
Video Cable
Equipment Using an
S-video or a Composite
Video Cable
Using an S-video or a composite video cable,
a VCR, laser disc player or other video equip-
ment can be connected to INPUT 3 and INPUT
4 input terminals.
a VCR, laser disc player or other video equip-
ment can be connected to INPUT 3 and INPUT
4 input terminals.
Connect the projector to the video
equipment using an S-video cable
(commercially available) or a com-
posite video cable.
equipment using an S-video cable
(commercially available) or a com-
posite video cable.
Note
•
The INPUT 3 (S-VIDEO) terminal uses a
video signal system in which the picture
is separated into colour and luminance
signals to realize a higher-quality image.
To view a higher-quality image, use a com-
mercially available S-video cable to con-
nect the INPUT 3 terminal on the projec-
tor and the S-video output terminal on the
video equipment.
video signal system in which the picture
is separated into colour and luminance
signals to realize a higher-quality image.
To view a higher-quality image, use a com-
mercially available S-video cable to con-
nect the INPUT 3 terminal on the projec-
tor and the S-video output terminal on the
video equipment.
To S-video output terminal
To video output terminal
Composite video cable
VCR or other video equipment
Supplied
accessory
accessory
Video Cable
Component cable
(commercially available)
(commercially available)
DVD player or
DTV* decoder
DTV* decoder
Connecting to
Component Video Equipment
Using a Component Cable
(INPUT 1 or 2)
Component Video Equipment
Using a Component Cable
(INPUT 1 or 2)
Use a component cable when connecting the
component video equipment such as DVD play-
ers and DTV* decoders to INPUT 1 or 2 termi-
nal.
component video equipment such as DVD play-
ers and DTV* decoders to INPUT 1 or 2 termi-
nal.
*DTV is the umbrella term used to describe the
new digital television system in the United States.
Connect the projector to the com-
ponent video equipment using the
component cable.
ponent video equipment using the
component cable.
Note
•
When connecting the projector to the
video equipment in this way, select “Com-
ponent” for “Signal Type” in the “Options”
menu, or select the Component mode by
pressing
video equipment in this way, select “Com-
ponent” for “Signal Type” in the “Options”
menu, or select the Component mode by
pressing
on the remote control. See
page 65.
•
Set the “Resolution” of “Special Modes”
to “480P” during input of a 480P signal.
See page 54.
to “480P” during input of a 480P signal.
See page 54.
Connecting to RGB Video
Equipment Using a 5 RCA
RGB Cable (INPUT 1 or 2)
Equipment Using a 5 RCA
RGB Cable (INPUT 1 or 2)
Use a 5 RCA RGB cable when connecting the
RGB video equipment such as DVD players and
DTV* decoders to INPUT 1 or 2 terminal.
RGB video equipment such as DVD players and
DTV* decoders to INPUT 1 or 2 terminal.
Connect the projector to the RGB
video equipment using the 5 RCA
RGB cable.
video equipment using the 5 RCA
RGB cable.
Note
•
When connecting the projector to the
video equipment in this way, select “RGB”
for “Signal Type” in the “Options” menu,
or select the RGB mode by pressing
on the remote control. See page 65.
video equipment in this way, select “RGB”
for “Signal Type” in the “Options” menu,
or select the RGB mode by pressing
on the remote control. See page 65.
•
The (HD/C sync) and (VD) terminals may
be used depending on the specifications
of the DTV decoder connected to this pro-
jector. Please refer to the operation
manual of the DTV decoder for details.
be used depending on the specifications
of the DTV decoder connected to this pro-
jector. Please refer to the operation
manual of the DTV decoder for details.
To analog RGB
output terminal
output terminal
5 RCA RGB cable
(Commercially available)
(Commercially available)
DVD player or
DTV* decoder
DTV* decoder
To analog component
output terminal
output terminal
Connecting the Projector to Other Devices
-18
