DOWNLOAD Sharp XV-Z10000 (serv.man29) Service Manual ↓ Size: 2.06 MB | Pages: 16 in PDF or view online for FREE

Note

•

Do not turn the lens shift dial beyond the
upper limit and lower limit positions. This
may cause the projector to malfunction.

90

°

90

°

Note

•

The projector lens should be centred in the middle of the screen. If the horizontal line passing through the
lens centre is not perpendicular to the screen, the image will be distorted, making viewing difficult.

•

For optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly on
the screen washes out the colours, making viewing difficult. Close the curtains and dim the lights when
setting up the screen in a sunny or bright room.

•

A polarizing screen cannot be used with this projector.

■ Place the projector at the required distance from the screenaccording to the desired picture size. (See page

29.)
Screen size : 254cm (100 inches)
Aspect ratio : 16:9

•

The distance from the screen to the projector
may vary depending on the size of the screen.

•

The default setting can be used, when placing the
projector in front of the screen. If the projected im-
age is reversed or inverted, readjust the setting to
“Front” for “PRJ Mode” in the “Options” menu.

•

Place the projector so that an imaginary horizontal
line that passes through the centre of the lens is
perpendicular to the screen.

Audience

When using a wide
screen (16:9)
In case of displaying the
16:9 picture on the whole
of the 16:9 screen.

 (Max.) = (0.05058x – 0.0447) 

×

 3.28

 (Min.) = (0.03734x – 0.0447) 

×

 3.28

 (Upper) = 0

 (Lower) = –0.45x

 : Screen size (diag.)

 : Projection distance

 : Distance from the lens centre to the

lower edge of the screen

When using a normal
screen (4:3)
In case of setting the
16:9 picture to the full
horizontal width of the
4:3 screen.

 (Max.) = (0.05510x – 0.04593) 

×

 3.28

 (Min.) = (0.04068x – 0.04369) 

×

 3.28

 (Upper) = 0

 (Lower) = –0.4904x

 : Screen size (diag.)

 : Projection distance

 : Distance from the lens centre to the

lower edge of the screen

3

4

: Screen area
: Picture area

Note

• There is an error of 

±

3% in the formula above.

• Values with a minus (–) sign indicate the distance of the lens centre below the

bottom of the screen.

Note

•

There is an error of 

±

 3% in the formula above.

•

Values with a minus (–) sign indicate the distance of the lens centre below the
bottom of the screen.

The formula for screen size and projection distance

The formula for screen size and projection distance

Upper (z

)

0 cm (0")
0 cm (0")
0 cm (0")
0 cm (0")
0 cm (0")
0 cm (0")
0 cm (0")

Screen size (4:3)

Distance from the lens centre to

the lower edge of the image (z)

Lower (z

)

–286 cm (–12'6")

–229 cm (–10')

–171 cm (–7'6")

–114 cm (–5')

–96 cm (–4'2")
–82 cm (–3'7")

–69 cm (–3')

Diag. (x)

762 cm (300")
635 cm (250")
508 cm (200")
381 cm (150")
338 cm (133")
269 cm (106")
254 cm (100")

234 cm (92")
213 cm (84")
183 cm (72")
152 cm (60")
102 cm (40")

Width

663 cm (261")
554 cm (218")
442 cm (174")
333 cm (131")
295 cm (116")

234 cm (92")
221 cm (87")
203 cm (80")
185 cm (73")
160 cm (63")
132 cm (52")

89 cm (35")

Height

373 cm (147")
312 cm (123")

249 cm (98")
188 cm (74")
165 cm (65")
132 cm (52")
125 cm (49")
114 cm (45")
104 cm (41")

89 cm (35")
74 cm (29")
51 cm (20")

Maximum (y

)

16.5 m (54'1")
13.7 m (45'1")

11.0 m (36')

8.2 m (26'12")
7.3 m (23'11")
5.8 m (18'11")
5.5 m (17'11")

5.0 m (16'5")

4.6 m (15')

3.9 m (12'10")

3.3 m (10'8")

2.2 m (7'1")

Minimum (y

)

12.2 m (39'11")

10.1 m (33'3")

8.1 m (26'7")

6.1 m (19'11")

5.4 m (17'7")

4.3 m (13'11")

4.0 m (13'2")
3.7 m (12'1")
3.4 m (11'1")

2.9 m (9'6")

2.4 m (7'10")

1.6 m (5'2")

Upper (z

)

0 cm (0")
0 cm (0")
0 cm (0")
0 cm (0")
0 cm (0")
0 cm (0")
0 cm (0")
0 cm (0")
0 cm (0")
0 cm (0")
0 cm (0")
0 cm (0")

Screen size (16:9)

Projection Distance (y)

Distance from the lens centre to

the lower edge of the image (z)

Lower (z

)

–374 cm (–12'3")
–311 cm (–10'3")

–249 cm (–8'2")
–187 cm (–6'2")
–166 cm (–5'5")
–131 cm (–4'4")
–125 cm (–4'1")
–114 cm (–3'9")
–105 cm (–3'5")
–90 cm (–2'11")

–75 cm (–2'5")
–50 cm (–1'8")

Maximum (y

)

12.6 m (41'4")

10.1 m (33')

7.5 m (24'9")
5.0 m (16'5")
4.2 m (13'9")

3.6 m (11'10")

3.0 m (9'10")

Minimum (y

)

9.3 m (30'6")
7.4 m (24'4")
5.6 m (18'3")
3.7 m (12'1")
3.1 m (10'2")

2.6 m (8'8")
2.2 m (7'2")

Projection Distance (y)

Diag. (x)

635 cm (250")
508 cm (200")
381 cm (150")
254 cm (100")

213 cm (84")
183 cm (72")
152 cm (60")

Width

508 cm (200")
406 cm (160")
305 cm (120")

203 cm (80")
170 cm (67")
147 cm (58")
122 cm (48")

Height

381 cm (150")
305 cm (120")

229 cm (90")
152 cm (60")
127 cm (50")
109 cm (43")

91 cm (36")

9

16

: Picture area

■ Place a translucent screen between the projector and the au-

dience.

■ Reverse the image by setting “Rear” for “PRJ Mode” in the

“Options” menu. See
page  69 for use of
this function.

■ Place a mirror (normal flat type) in front of the lens.

■ Reverse the image by setting “Rear” for “PRJ Mode” in the

“Options” menu,
when the mirror is
placed on the audi-
ence side. See page
69 for use of this
function.

•

When using a mirror, be sure to carefully position both the pro-
jector and the mirror so the light does not shine into the eyes of
the audience.

■ It is recommended that you use the optional Sharp ceiling-mount

bracket for this installation.

■ Before mounting the projector, contact your nearest Sharp

Authorised Projector Dealer or Service Centre to obtain the
recommended ceiling-mount bracket (sold separately). (AN-
TK202 ceiling-mount bracket, AN-TK201 extension tube, AN-
NV6T ceiling adaptors for AN-TK202 or AN-TK201.)

■ Be sure to adjust the position of the projector to match the

distance (z) from the lens centre position (see page 29) to the
lower edge of the image,
when mounting the projec-
tor on the ceiling.

■ Invert the image by setting

“Ceiling + Front” for “PRJ
Mode” in the “Options”
menu. See page 69 for use
of this function.

When using the default setting.

▼On-screen Display

The image is reversed.

When using the default setting.

▼On-screen Display

The image is reversed.

When using the default setting.

▼On-screen Display

The image is inverted.