DOWNLOAD Sharp XG-P20XE (serv.man21) Service Manual ↓ Size: 1.58 MB | Pages: 20 in PDF or view online for FREE

Product type

Model

Video system

Display method

LCD panel

Standard Lens

Projection lamp

Contrast ratio

Video input signal

S-video input signal

Component input signal

Horizontal resolution

RGB input signal

Pixel clock

Vertical frequency

Horizontal frequency

Computer control signal

Speaker system

Rated voltage

Input current

Rated frequency

Power consumption

Power dissipation

Operating temperature

Storage temperature

Cabinet

GyroRemote

Dimensions (approx.)

Weight (approx.)

Supplied accessories

Replacement parts

LCD Projector
XG-P20XE
PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43
DTV 480P/720P/1080i
LCD panel 

 3, RGB optical shutter method

Panel size: 33 mm (1.3

) (20.0 [H]  26.6 [W] mm)

Display method: Translucent TN liquid crystal panel
Drive method: TFT (Thin Film Transistor) Active Matrix panel
No. of dots: 786,432 dots (1,024 [H] 

 768 [V])

1–1.3 

 zoom lens, F1.7–2.3, f = 49.1–63.8 mm

AC 220 W lamp
400:1
RCA Connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 

Ω terminated

RCA Connector: AUDIO, 0.5 Vrms more than 22 k

Ω (stereo)

4-pin Mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 

Ω terminated

C (chrominance signal): Burst 0.286 Vp-p, 75 

Ω terminated

BNC Connector (INPUT 2)
Y: 1.0 Vp-p, sync negative, 75 

Ω  terminated

P

B

: 0.7 Vp-p, 75 

Ω  terminated

P

R

: 0.7 Vp-p, 75 

Ω  terminated

520 TV lines (S-video input), 750 TV lines (DTV 720P input, STRETCH mode)
DVI 

CONNECTOR

 (29-

PIN

) (INPUT 3), RGB (DIGITAL), 250–1,000 mV, 50 

Ω

15-

PIN

 

MINI

 D-

SUB

 

CONNECTOR

 (INPUT 1), 5 BNC 

CONNECTOR

 (INPUT 2):

RGB separate/composite sync/sync on green type analog input: 0–0.7 Vp-p, positive,
75 

Ω terminated

S

TEREO

 M

INIJACK

: AUDIO, 0.5 Vrms, more than 22 k

Ω (stereo)

H

ORIZONTAL

 

SYNC

. 

SIGNAL

: TTL level (positive/negative) or composite sync (Apple only)

V

ERTICAL

 

SYNC

. 

SIGNAL

: Same as above

12–230 MHz
43–200 Hz
15–126 kHz
9-pin D-sub connector (RS-232C Input Port/Output Port)
4.5 cm (1 

49

⁄

64

) round  2

2 W 

 2 W (stereo)

AC 100–240 V
3.95 A
50/60 Hz
330 W
< 1,250 BTU/hour

5°C to 40°C

20°C to 60°C
Plastic
RF carrier frequency: 49.825–49.895 MHz
Design field: 2,500 uV/m (at 3 m (9

 10))

Control range: 30 m (98

 5)

319.0 

 155.0  423.0 mm (12 

9

⁄

16

 (W)  6 

3

⁄

32

 (H)  16 

21

⁄

32

 (D)) (main body only)

322.5 

 188.5  438.0 mm (12 

11

⁄

32

 (W)  7 

27

⁄

64

 (H)  17 

15

⁄

64

 (D)) (including standard

lens, adjustment feet and projecting parts)
9.5 kg (main body only)
GyroRemote, Four AAA size batteries, Power cord (1.8 m), RGB cable (3 m), USB mouse
control cable (1 m), Computer audio cable (3 m), ø2.5–ø3.5 mm wired remote control
cable (15 cm), Three BNC-RCA adaptors, Extra air filter, Lens cap, CD-ROM, LCD
projector operation manual, LCD projector quick reference, Sharp Advanced Presentation
Software operation manual, ID number seal
Standard lens unit (CLNS-0236CE01), Lamp unit (Lamp/cage module) (BQC-XGP20X//1),
GyroRemote (RRMCG1653CESA), AAA size batteries, Power cord, RGB cable
(QCNW-5304CEZZ), USB mouse control cable (QCNW-5916CEZZ), Computer audio cable
(QCNW-4870CEZZ), ø2.5–ø3.5 mm wired remote control cable (QCNW-5943CEZZ), BNC-
RCA adaptors (QPLGJ0107GEZZ), Air filter (PFILD0080CEZZ), Lens cap
(PCAPH1056CESA), CD-ROM (UDSKA0045CEN1), LCD projector operation manual (TINS-
7403CEZZ), LCD projector quick reference (TINS-7404CEZZ, TINS-7405CEZZ), Sharp
Advanced Presentation Software operation manual (TINS-7407CEZZ), ID number seal
(TLABZ0781CEZZ)

This SHARP projector uses LCD (Liquid Crystal Display) panels. These
very sophisticated panels contain 786,432 pixels (

 RGB) TFTs (Thin

Film Transistors). As with any high technology electronic equipment
such as large screen TVs, video systems and video cameras, there
are certain acceptable tolerances that the equipment must conform
to.

This unit has some inactive TFTs within acceptable tolerances which
may result in illuminated or inactive dots on the picture screen. This
will not affect the picture quality or the life expectancy of the unit.

Specifications are subject to change without notice.

Width and height ratio of an image. The normal aspect ratio of a computer and video image is 4 : 3. There are also wide images with an aspect ratio of 16 : 9
and 21 : 9.

Optimises projected computer images by automatically adjusting certain characteristics.

Initial setting image projected when no signal is being input.

Displays the 4:3 image as the biggest size (768

576) that can be displayed on the WIDE mode screen (1024576).

Clock adjustment is used to adjust vertical noise when clock level is incorrect.

Function that can be used to adjust the colour temperature to suit the type of image input to the projector. Decrease the colour temperature to create warmer,
reddish images for natural flesh tones, or increase to create cooler, bluish images for a brighter picture.

Signal combining horizontal and vertical sync pulses.

Shifts image up or down easily by ∂/ƒ buttons when RESIZE mode of input image is BORDER, STRETCH or SMART STRETCH of COMPUTER (except for
SXGA and UXGA), VIDEO and DTV inputs.

Provides high quality images with minimal dot crawl and cross colour noise.

Mode that projects images in their native resolution.

Digital Visual Interface that supports both digital and analog displays.

Image quality enhancement function that offers a richer image by brightening the darker portions of the image without altering the brightness of the brighter
portions. You can select four different modes : STANDARD, PRESENTATION, CINEMA and CUSTOM.

Remote control device with a built-in sensor that can operate projectors and computers. GyroRemote communicates with a projector via radio signals and
therefore does not encounter the line-of-sight problems found in infrared devices.

High quality resizing of lower and higher resolution images to fit the projector’s native resolution.

Function to digitally correct a distorted image when the projector is set up at an angle, smooths out jaggies on keystone images and compresses the image not
only horizontally but vertically keeping the 4 : 3 aspect ratio, and at the same time, calculates the aspect ratio automatically adjusting to the lens shift width.

Mode that can lock the operation of projector buttons to prevent mischief.

The lens can be easily raised and lowered to minimize or eliminate “Keystone” type effect.

Digitally zooms in on a portion of an image.

Phase shift is a timing shift between isomorphic signals with the same resolution. When phase level is incorrect, the projected image typically displays horizontal
flicker.

Allows you to add video images onto a data screen image, providing you with even more effective presentations.

Helpful tools used to emphasise keypoints throughout a presentation.

The progressive display projects a smoother video image. You can select three different modes : 2D Progressive, 3D Progressive and Film Mode.

Allows you to modify or customise the picture display mode to enhance the input image. You can select six different modes: NORMAL, FULL, DOT BY DOT,
BORDER, STRETCH and SMART STRETCH.

Function to control the projector from the computer by using the RS-232C ports on the projector and computer.

Function to limit inputs. For example, when setting Input 2 to “OFF”, the input is switchable only between Input 1 and Input 3, skipping Input 2.

Mode that stretches the right and left sides of the 4:3 image horizontally while maintaining the aspect ratio around the centre of the image to display it on the WIDE
screen.

Prevents trouble with adjustment and operation when stack projecting. When setting two projectors, one to master and the other to slave, the slave follows the
master’s operation.

Displays the settings of each adjustment item.

Mode that stretches the 4:3 image horizontally to display it on the WIDE screen.

Video signal mode of a computer which overlaps horizontal and vertical sync signal to green colour signal pin.

AC socket ........................................................................

Adjusting the Picture .......................................................

Adjustment Feet ..............................................................

Air filter ............................................................................

Aspect ratio .....................................................................

ASSIGN Select button .....................................................

Audio ...............................................................................

Audio cable .....................................................................

AUDIO INPUT terminal ...................................................

AUDIO OUTPUT terminal ................................................

Auto sync adjustment .....................................................

AUTO SYNC button .........................................................

Background ....................................................................

BLACK SCREEN button ..................................................

BNC-RCA adaptors .........................................................

BORDER .........................................................................

Carrying handle ..............................................................

Ceiling-mount ..................................................................

Ceiling+Rear ...................................................................

Clock ...............................................................................

CLR Temp (Colour Temperature) ....................................

Digital shift ......................................................................

DNR (Digital Noise Reduction) .......................................

DOT BY DOT ...................................................................

DVI INPUT port (INPUT 3) ...............................................

Economy Mode ...............................................................

ENTER button ..................................................................

Exhaust vent ....................................................................

Extra air filter ...................................................................

FAO .................................................................................

Function Assign button ...................................................

GAMMA button ...............................................................

GUI (Graphical User Interface) .......................................

GyroRemote ....................................................................

INPUT button ...................................................................

INPUT port ......................................................................

Intelligent digital keystone correction .............................

Keylock Levels ................................................................

LAMP REPLACEMENT indicator .....................................

LEARN button .................................................................

LEFT-CLICK button .........................................................

LENS button ....................................................................

Lens shift .........................................................................

MENU button ...................................................................

Monitor Out/RS-232C Off Function .................................

MUTE button ...................................................................

Network Function ............................................................

On-screen display ...........................................................

On-screen display Language .........................................

OUTPUT port ..................................................................

Password ........................................................................

PDF .................................................................................

Phase ..............................................................................

Picture in Picture .............................................................

POINTER button ..............................................................

POWER buttons ..............................................................

Power cord ......................................................................

POWER indicator ............................................................

Presentation tools ............................................................

Progressive Mode ...........................................................

Rear projection ................................................................

RESIZE button .................................................................

RF CH+ button ................................................................

RGB cable .......................................................................

RIGHT-CLICK button .......................................................

RS-232C port ..................................................................

Save Setting ....................................................................

Select Setting ..................................................................

Set ID No. ........................................................................

Set Inputs ........................................................................

Speaker ...........................................................................

Stack Setting ...................................................................

Startup image .................................................................

Status function ................................................................

S-VIDEO INPUT terminal .................................................

Sync ................................................................................

Sync on green .................................................................

TEACH button .................................................................

TEMPERATURE WARNING indicator ..............................

Transmission Speed (RS-232C) ......................................

UNDO button ..................................................................

USB mouse control cable ...............................................

VAO .................................................................................

VIDEO INPUT terminal ....................................................

Video System ..................................................................

Videowall .........................................................................

VOLUME buttons ............................................................

Wired remote control input ..............................................

WIRED REMOTE control input terminal ..........................

1.2.3 button .....................................................................

4.5 button ........................................................................