Sharp XG-P10XE (serv.man2) Service Manual ▷ View online
38
XG-P10XE
TROUBLE SHOOTING TABLE
(Continued)
Yes
Checking the output PWB unit
Are there signal inputs at
SC1404, SC1405, SC1501 and
SC1502?
Are voltages applied to EA
connectors and SC8404,
SC8405 and SC8502?
SC1404, SC1405, SC1501 and
SC1502?
Are voltages applied to EA
connectors and SC8404,
SC8405 and SC8502?
Yes
No
No
No
Check IC2101, IC2202,
IC2302 and their peripheral
circuits.
IC2302 and their peripheral
circuits.
Are there signal outputs at
pins (17) of IC2102, IC2202,
IC2302?
pins (17) of IC2102, IC2202,
IC2302?
Yes
No
Are there signal inputs at pin
(47) of IC1101, IC1102,
IC1201, IC1202, IC1301 and
IC1302?
(47) of IC1101, IC1102,
IC1201, IC1202, IC1301 and
IC1302?
Yes
No
Check IC1101,IC1201,IC1301
and their peripheral circuits.
and their peripheral circuits.
Are there signal outputs at pins
(17), (19), (21), (27), (29) and
(31) of IC1101, IC1102,
IC1201, IC1202, IC1301 and
IC1302?
(17), (19), (21), (27), (29) and
(31) of IC1101, IC1102,
IC1201, IC1202, IC1301 and
IC1302?
Yes
Yes
No
If there is no signal input at
pins (15) and (30) of
SC1101, SC1102 and
SC1103, check IC1603,
IC1601 and their
peripheral circuits.
pins (15) and (30) of
SC1101, SC1102 and
SC1103, check IC1603,
IC1601 and their
peripheral circuits.
No
If there is no signal input at
pins (1) and (31) of SC1101,
SC1102 and SC1103, check
the switching circuit and
amplifier circuit of IC1101,
IC1201, IC1301, IC1102,
IC1202, IC1302 and their
peripheral circuits.
pins (1) and (31) of SC1101,
SC1102 and SC1103, check
the switching circuit and
amplifier circuit of IC1101,
IC1201, IC1301, IC1102,
IC1202, IC1302 and their
peripheral circuits.
Are there signal inputs at
SC1101, SC1201 and
SC1301?
SC1101, SC1201 and
SC1301?
Check IC1611, IC1612,
IC1613, IC1615 and their
peripheral circuits.
IC1613, IC1615 and their
peripheral circuits.
Check the R, G and B panels.
If there is no signal at EA
connector or SC8404, SC8405
and SC8502, go to Checking
the power unitblock.
connector or SC8404, SC8405
and SC8502, go to Checking
the power unitblock.
If there is no signal at SC8404
and SC8405, go to "Trouble
shooting table for PC I/F unit".
and SC8405, go to "Trouble
shooting table for PC I/F unit".
If there is no signal at P801
and P802, go to the video
system block.
and P802, go to the video
system block.
Check IC2102, IC2202,
IC2302 and their peripheral
circuits.
IC2302 and their peripheral
circuits.
39
XG-P10XE
TROUBLE SHOOTING TABLE
(Continued)
No audio output
Yes
No
Check the input, the switching circuit
of IC441 and IC442, and their
peripheral circuit.
of IC441 and IC442, and their
peripheral circuit.
Are there audio signal inputs at pins
(2) and (23) of IC1301?
(2) and (23) of IC1301?
Yes
No
Check the IC1411 control voltage,and
its peripheral circuits.
its peripheral circuits.
Are there audio signal outputs at pins
(1) and (2) of P301?
(1) and (2) of P301?
Yes
No
Check IC302 and its peripheral
circuits.
circuits.
Are there audio signal outputs at pin
(6) of IC302?
(6) of IC302?
Check IC302 and its peripheral
circuits, and the SP connectors and
speakers.
circuits, and the SP connectors and
speakers.
If the voltage at pin (7) of IC302 is not
as specified, check Q7082, Q7081
and their peripheral circuits.
as specified, check Q7082, Q7081
and their peripheral circuits.
Checkig the Power Unit
There is no voltage output at
EA connector.
EA connector.
No
No
No
Yes
Yes
Yes
Yes
Is EA connector disconnected
or loose?
or loose?
Is TF751 broken?
Is R727 broken?
Is AC voltage (85-264V)
applied across the PA
connector?
applied across the PA
connector?
Reconnect the EA connector.
There is a short-circuit along
the EA output line. Using a
tester, check the resistance
between each voltage line and
the ground.
the EA output line. Using a
tester, check the resistance
between each voltage line and
the ground.
No
Replace F791.
Replace.
Replace R727 or Q701.
40
XG-P10XE
TROUBLE SHOOTING TABLE
(Continued)
Power on
Yes
No
Is the right input selected?
Select the right input with remote
control.
control.
Yes
No
Are the PC, video and LCP cables as
specified and properly connected?
specified and properly connected?
No
With the contrast control at maximum,
does the image appear?
does the image appear?
Use the right cables or reconnect the
cables.
cables.
Readjust the video system.
Yes
No
Is the voltage at CON3 (P8502)
connector as specified?
connector as specified?
Power circuit faulty.
Yes
Hook up a personal computer.
No
Does the image appear?
Go to "Checking the clock circuit and
its peripheral circuits".
its peripheral circuits".
Yes
No
Is the image as specified?
Check the sync signal circuit and its
peripheral circuits.
peripheral circuits.
Yes
No
Is the image's colour as specified?
Check the video circuit and its
peripheral circuits.
peripheral circuits.
Yes
No
Does the on-screen display function?
Go to "Checking the OSD circuit and
its peripheral circuits".
its peripheral circuits".
Yes
No
Does the remote control function?
Go to "Checking the remote control".
Yes
End
A
41
XG-P10XE
TROUBLE SHOOTING TABLE
(Continued)
Lamp fails to light-up
Yes
Yes
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Turn on the power switch. Is
discharging sound heard from
the lamp?
discharging sound heard from
the lamp?
Is the ballast cooling fan
running?
running?
Is DC 360V voltage applied
between PL connector pins?
between PL connector pins?
Is 3.5V or higher voltage
applied between pins (1) and
(3) of ballast's D connector?
applied between pins (1) and
(3) of ballast's D connector?
Is power EA connector
disconnected?
disconnected?
Check the power circuit.
Is the lamp out of socket?
Reconnect the
lamp into socket.
lamp into socket.
Replace the
lamp.
lamp.
Reconnect the
connector into socket.
connector into socket.
Check the
microcomputer circuit.
microcomputer circuit.
Replace the ballast.
Click on the first or last page to see other XG-P10XE (serv.man2) service manuals if exist.