DOWNLOAD Sharp XG-NV6XE (serv.man12) Service Manual ↓ Size: 5.13 MB | Pages: 67 in PDF or view online for FREE

This function allows you to reduce the power
consumption when the projector is off.

• The projector is factory preset to Mode 2.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Options”.

3 Press ∂/ƒ to select “Economy Mode”, and then

press ©.

4 Press ∂/ƒ to select the desired mode.

5 Press ENTER to save the setting.

6 To exit from the GUI, press MENU.

5

2, 3, 4

1, 6

ON

ON

OFF

OFF

OFF

ON

OFF

ON

When no input signal is detected for more than 15
minutes, the projector will automatically shut off. The
on-screen message on the left will appear five minutes
before the power is automatically turned off.

• Select Mode 2 or Mode 4 when using the Sharp Advanced

Presentation Software (supplied).

This function allows you to select either an interlaced
display or a progressive display of a video signal. The
progressive display projects a smooth video image.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Options”.

3 Press ∂/ƒ to select “I/P Conversion”, and then

press ©.

4 Press ∂/ƒ to select “Interlaced” or “Progressive”.

5 Press ENTER to save the setting.

6 To exit from the GUI, press MENU.

5

2, 3, 4

1, 6

This function allows you to check the accumulated lamp
usage time.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Options”. The lamp usage

time will be displayed.

• It is recommended that the lamp be replaced after

approximately 2,000 hours of usage. At this point, take the
projector to your nearest Sharp Authorised LCD Projector
Dealer or Service Centre to have the lamp replaced. See
page 47 for details.

2

1

This function allows you to select the input signal type.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Options”.

3 Press  ∂/ƒ to select “Signal Type”, and then

press ©.

4 Press  ∂/ƒ to select “Computer/RGB” or

“Component”.

5 Press ENTER to save the setting.

6 To exit from the GUI, press MENU.

5

2, 3, 4

1, 6

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Options”.

3 Press ∂/ƒ to select “Signal Info” to display the

current input signal.

4 To exit from the GUI, press MENU.

• In VIDEO mode, the resolution and frequency settings will

not be displayed.

This function allows you to check the current input signal
information.

2, 3

1, 4

 Image

This function allows you to select the image displayed
when no signal is being sent to the projector.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.
2 Press ß/© to select “Options”.
3 Press ∂/ƒ to select “Background”, and then press

©

.

4 Press ∂/ƒ to select the background image you want

to display on the screen.

5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.

• By selecting “Custom”, the projector can display a custom image

(i.e. your company logo) as the background image. Custom image
must be 256-colour BMP file with a picture size of 1,024 

 768 or

lower. Please see the Sharp Advanced Presentation Software
operation manual for how to save (or change) a custom image.

SHARP default image

User customised image (i.e. company logo)

Blue screen

Black screen

5

2, 3, 4

1, 6

• This function allows you to specify the image to be

displayed upon the projector’s startup.

• A custom image (i.e. your company logo) can be

loaded on the projector via IrCOM or an RS-232C
cable. See pages 14 and 25 in this operation manual,
and also the supplied Sharp Advanced Presentation
Software operation manual for detailed instructions.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.
2 Press ß/© to select “Options”.
3 Press ∂/ƒ to select “Startup Image”, and then press

©

.

4 Press ∂/ƒ to select the startup image you want to

display on the screen.

5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.

• By selecting “Custom”, the projector can display a custom image

(i.e. your company logo) as the startup image. Custom image must
be 256-colour BMP file with a picture size of 1,024 

 768 or lower.

Please see the Sharp Advanced Presentation Software operation
manual for how to save (or change) a custom image.

SHARP default image

User customised image (i.e. company logo)

Black screen

5

2, 3, 4

1, 6