DOWNLOAD Sharp XG-NV6XE (serv.man12) Service Manual ↓ Size: 5.13 MB | Pages: 67 in PDF or view online for FREE

1

3

2

This function allows you to magnify a specific portion of
an image. This is useful when you want to display a
detailed portion of the image.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ.)

1 Press  ENLARGE. Each time ENLARGE is

pressed, the image will be magnified.

2 When the image is magnified, you can pan and

scan around the image by using ∂/ƒ/ß/©.

• Each time ENLARGE is pressed, image magnification

toggles as shown below.

• If the input signal is changed during digital image

magnification, the image will return to 

1. The input signal

is changed
(a) when INPUT is pressed,
(b) when the input signal is interrupted, or
(c) when the input resolution and refresh rate changes.

3 To return to 

 1, press UNDO.

sg

1

2

• Gamma is an image quality enhancement function

that offers a richer image by brightening the darker
portions of the image without altering the brightness
of the brighter portions.

• Four gamma settings are available to allow for

differences in the images played and in the brightness
of the room.

• When you are watching images with frequent, dark

scenes, such as a film or concert, or when you are
watching images in a bright room, this feature makes
the dark scenes easier to see and gives the impres-
sion of greater depth in the image.

Standard picture without gamma correction.
Brightens darker portions of image.
Gives greater depth to darker portions of image.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press GAMMA. Each time GAMMA is pressed,

the gamma level toggles as shown on the left.

2 To return to the standard image, press UNDO

while “GAMMA” is displayed on the screen.

Allows you to adjust gamma value using Sharp
Advanced Presentation Software.

ss

s

This function allows you to modify or customise the picture display mode to enhance the input image. Depending
on the input signal, you can choose NORMAL, WIDE, DOT BY DOT, DOT BY DOT (WIDE), or FIT TO SCREEN
image.

• Each time RESIZE is pressed, the picture mode changes as shown below.

g

g

g

MODE
INPUT SIGNAL

4:3

480 P

16:9

720 P

SXGA

 

DTV

COMPUTER

NORMAL
WIDE
DOT BY DOT
DOT BY DOT (WIDE)

1024 

 768

1024 

 576

640 

 480

853 

 480

1024 

 576

—

1280 

 720

—

960 

 768

1024 

 768

1280 

 1024
—

PAL

VIDEO

1024 

 768

1024 

 576

720 

 540
—

RESIZE

button

For DTV decoder RGB signal in 4:3 aspect ratio.

g

g

For computer SVGA signal or DTV decoder RGB signal in 16:9 aspect ratio.

For COMPUTER/RGB signal without 4:3 aspect ratio.

• “

” is displayed only when SXGA signals that are not in 4:3 

 are input.

•

 mode displays images in their native resolution and not expanded to fit the LCD resolution.

• To return to NORMAL mode, press UNDO while “RESIZE” is displayed on the screen.

g

g

For video PAL signal.

This function can be used to superimpose a black
screen over the projected image.

Press  BLACK SCREEN.  “BLACK SCREEN” is dis-
played on the screen. To return to the original projected
image, press BLACK SCREEN again.

• To use the remote control to operate this

function, slide the MOUSE/ADJUSTMENT switch to the
MOUSE position before pressing BLACK SCREEN.

The On-screen Display (“BLACK SCREEN”) that
appears during black screen can be turned off. When
“BLK SCRN Disp” is set to “

” in the GUI menu, “BLACK

SCREEN” will not be displayed during function.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß /©  to select “Options”.

3 Press  ∂/ƒ  to select “BLK SCRN Disp”.

4 Press  ß/©  to select “ ” to turn on or “ ” to

turn off the function.

5 To exit from the GUI, press MENU.

2, 3, 4

1, 5

BLACK

SCREEN

button

This function allows you to turn off the on-screen
messages that appear during “input select” and the
“IrCOM” function. Once “OSD Display” is set to “

” in

the GUI menu, the on-screen messages will not appear
when INPUT and IrCOM are pressed.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Options”.

3 Press ∂/ƒ to select “OSD Display”.

4 Press ß/© to select “ ” to turn on or “ ” to turn

off the On-screen Display.

5 To exit from the GUI, press MENU.

2, 3, 4

1, 5

sg