DOWNLOAD Sharp XG-NV6XE (serv.man12) Service Manual ↓ Size: 5.13 MB | Pages: 67 in PDF or view online for FREE

• Used to automatically adjust a computer image.
• Auto Sync adjustment can be made manually by

pressing  AUTO SYNC, or automatically by setting
“Auto Sync” to “ON” in the projector’s GUI menu.

When “Auto Sync” is set to “ON”:
• The 

the projector is turned on while connected to a com-
puter or the input selection is changed.

• The Auto Sync adjustment setting previously made is

cleared when the projector’s setting is changed.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Fine Sync”.

3 Press ∂/ƒ to select “Auto Sync”.

4 Press ß/© to select “ON”.

5 To exit from the GUI, press MENU.

• Automatic adjustments can be made by pressing AUTO

SYNC.

• When the optimum image cannot be achieved with Auto

Sync adjustment, use manual adjustments. (See the
previous page.)

During Auto Sync adjustment, the On-screen Display
changes as shown on the left.

• Auto Sync adjustment may take some time to complete,

depending on the image of the computer connected to the
projector.

2, 3, 4

1, 5

g

s

f

AUTO SYNC

button

Normally, an image is not superimposed during Auto
Sync adjustment. You can, however, choose to
superimpose a backgraund image during Auto Sync
adjustment.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß /©  to select “Options”.

3 Press  ∂/ƒ  to select “Auto Sync Disp”.

4 Press  ß  /© to select “ ” to superimpose a

background image or “

” to remove the

background image during Auto Sync adjustment.

5 To exit from the GUI, press MENU.

This projector allows you to store up to seven adjustment
settings for use with various computers. Once these
settings are stored, they can be easily selected each
time you connect the computer to the projector.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Fine Sync”.

3 Press ∂/ƒ to select “Save Setting”, and then press

©

.

4 Press ∂/ƒ to select the desired memory location of

the setting.

5 Press ENTER to save the setting.

6 To exit from the GUI, press MENU.

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Fine Sync”.

3 Press ∂/ƒ to select “Select Setting”, and then press

©

.

4 Press ∂/ƒ to select the desired memory setting.

5 Press ENTER to select the setting.

6 To exit from the GUI, press MENU.

• If the memory position has not been set, the resolution and

frequency will not be displayed.

• When selecting the stored adjustment setting with “Select

Setting”, the computer system should match the stored
setting.

2

3

4

5

2, 3, 4

1, 6

Ordinarily, the type of input signal is detected and the
correct resolution mode is automatically selected.
However, for some signals, “Special Modes” on the “Fine
Sync” menu screen may need to be changed to match
the computer display mode.

(Slide the MOUSE/ADJUSTMENT switch on
the remote control to the ADJ. position.)

1 Press MENU.

2 Press ß/© to select “Fine Sync”.

3 Press ∂/ƒ to select “Special Modes”.

4 Press ∂/ƒ to select the optimal resolution mode.

5 Press ENTER to save the setting.

6 To exit from the GUI, press MENU.

• Avoid displaying computer patterns which repeat every

other line (horizontal stripes). (Flickering may occur, making
the image hard to see.)

• When inputting DTV 480P signals, select “480P” in step 

4

above.

5

2, 3, 4

1, 6

This function allows you to instantly freeze a moving
image. This is useful when you want to display a still
image from a computer or video, giving you more time
to explain the image to the audience.
You can also use this function to display a still image
from a computer while you make preparations for the
next computer images to be presented.

1 Press FREEZE to freeze the image.

2 Press  FREEZE again to return to the moving

image.

1, 2