DOWNLOAD Sharp XG-NV5XE (serv.man50) Service Manual ↓ Size: 2.74 MB | Pages: 53 in PDF or view online for FREE

• The IrCOM function can be used to wirelessly transfer

still images from a computer, handheld P/C or digital
camera to the projector via infrared communication.
This function is used with the supplied Sharp
Advanced Presentation Software. See the operation
manual of the software for installation and operating
instructions.

• Position the projector and the IrCOM transmitting

device within the range shown on the left.

• To avoid transmission errors or changes in the image, ensure

the following when setting up the projector and transmitting
device.
• The IrCOM sensors on both the projector and transmitting

device are protected from direct sunlight or strong
ambient light.

• The transmitting device has sufficient battery power.
• The projector and transmitting device are positioned

within the designated operating range.

• The IrCOM sensors on the projector and transmitting

device are correctly aligned.

1 Before setting up the projector and computer,

install the Sharp Advanced Presentation Software
in the supplied CD-ROM on the computer. See
the operation manual of the software for installation
details.

• The distance between the projector and transmitting device

may have to be less than 10 cm depending on the
transmitting device.

• When using the digital still camera, set it to the image

transmission mode and set the computer to the image
reception mode.

2 Align the projector and transmitting device at the

same height and angle at a distance of 10 cm to
1 meter with an unobstructed line of view.

3 Press 

 on the projector or the “Power”

remote control to enter the IrCOM mode. The On-
screen Display changes as shown on the left.

• To use the “Power” remote control to operate this function,

slide the 

 switch to the ADJ. position

before pressing 

.

• If the On-screen Display does not change as shown on the

left, the projector may not be within the reception range
from the IrCOM transmitting device.

4 Press 

 on the projector or 

on the “Power” remote control to exit the IrCOM
mode.

• If the projector is unable to receive images from the IrCOM

transmitting device, the On-screen display on the left will
appear.

f

f

f

f

f

LCD PROJECTOR

4

3

15˚

15˚

10 cm–1 m

15˚

15˚

4

2, 3

1, 5

English is the preset language for the On-screen
Display. It can be changed to English, German, Spanish,
Dutch, French, Italian, Swedish or Japanese.

(For use with the “Power” remote control, slide the

 switch to the ADJ. position.)

1 Press 

.

2 Press ß/© to select “Language”.

3 Press  ∂/ƒ to select the desired language .
4 Press 

 to save the setting. The On-screen

Display is now programmed to display in the
language selected.

5 To exit from the GUI, press 

.

2, 3

1, 4

You can adjust the projector’s picture to your prefer-
ences with the following picture settings.

For less contrast
For less brightness
For weaker red
For weaker blue

For more contrast
For more brightness
For stronger red
For stronger blue

ß 

© 

All picture adjustment items are returned to the factory preset
settings.

(For use with the “Power” remote control, slide the

 switch to the ADJ. position.)

1 Press 

. Menu bar and “Picture” menu

screen appears. GUI Operation guide is also
displayed.

2 Press ∂/ƒ  to select a specific adjustment item.

3 Press ß/© to move the   mark of the selected

adjustment item to the desired setting.

4 To exit from the GUI, press 

.

• To reset all adjustment items, select “Reset” on the “Picture”

menu screen and press 

.

• The adjustments can be stored separately in the

“COMPUTER1” and “COMPUTER2” modes.

1

2

This projector’s audio is factory preset to standard
settings. However, you can adjust it to suit your own
preferences by adjusting the following audio settings.

(For use with the “Power” remote control, slide the

 switch to the ADJ. position.)

1 Press 

. Menu bar and “Picture” menu

screen appears. GUI Operation guide is also dis-
played.

2 Press ß/© to select “Audio”.

3 Press ∂/ƒ to select a specific adjustment item.

4 Press ß/© to move the  mark of the selected

adjustment item to the desired setting.

5 To exit from the GUI, press 

.

• To reset all adjustment items, select “Reset” on the “Audio”

menu screen and press 

.

For weaker treble
For weaker bass

For stronger treble
For stronger bass

All audio adjustment items are returned to the factory preset
settings.

2, 3, 4

1, 5

© button

ß button

2

3

When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
occur between the LCD pixels, causing flickering,
vertical stripes, or contrast irregularities in portions of
the screen. Should this occur, adjust “Clock”, “Phase”,
“H-Pos” and “V-Pos” for optimum computer image.

• Computer image adjustment can be made easily by

pressing 

(

) on the projector or the “Power”

remote control. See the next page for details.

2, 3, 4

1, 5

Adjusts vertical noise.
Adjusts horizontal noise (similar to tracking on your VCR).
Centres the on-screen image by moving it to the left or right.
Centres the on-screen image by moving it up or down.

(

Select the desired computer input mode with 

 on the projector or 

 on the “Power”

remote control.)

(For use with the “Power” remote control, slide the

 switch to the ADJ. position.)

1 Press 

. Menu bar and “Picture” menu

screen appears. GUI Operation guide is also
displayed.

2 Press ß/©  to select “Fine Sync”.

3 Press  ∂/ƒ  to select a specific adjustment item.
4 Press ß/© to move the   mark of the selected

adjustment item to the desired setting.

5 To exit from the GUI, press 

.

• To reset all adjustment items, select “Reset” on the “Fine

Sync” menu screen and press 

.

2

3