DOWNLOAD Sharp XG-NV5XE (serv.man50) Service Manual ↓ Size: 2.74 MB | Pages: 53 in PDF or view online for FREE

1

1

Plug the supplied power cord into the AC socket on the
back of the projector.

2

Press the 

 switch on the back of the

projector. The POWER indicator lights up red and the
projector enters standby mode.

• If the bottom filter cover is not securely installed, the POWER

indicator flashes.

• When the main power is not on, the “Power” remote control

cannot be used.

3

Press 

 on the projector or the “Power”

remote control.

• The flashing green LAMP REPLACEMENT indicator shows

that the lamp is warming up. Wait until the indicator stops
flashing before operating the projector.

• If the power is turned off and then immediately turned on

again, it may take a short while before the lamp turns on.

• After the projector is unpacked and turned on for the first

time, a slight odour may be emitted from the exhaust vent.
This odour will soon disappear with use.

5
4

2

When the main power is on, the POWER indicator lights up
red.

When the power is on, the LAMP REPLACEMENT indicator
lights indicating the status of the lamp.

 Lamp is ready.

 Warming up.

 Change the lamp.

4

Slide the focus knob until the image on the screen
becomes clear.

5

Slide the zoom knob. The image can be adjusted to the
desired size within the zoom range.

3

6

Press 

 on the projector or 

 on

the “Power” remote control to select the desired input
mode. Press it again to change the mode as shown on
the left.

• When no signal is being received, “No Signal” will be

displayed. When a signal that the projector is not preset to
receive is being received, “Not Reg.” will be displayed.

7a

7b

8

6

To view the image from a
source connected to:
COMPUTER INPUT 1

COMPUTER INPUT 2

s

f

7 

a. Press 

 

`/

 

1 on the projector

or the “Power” remote control to adjust the volume.

b. Press 

 on the projector or the “Power”

remote control to temporarily turn off the sound.
Press 

 again to turn the sound back on.

8 

1. Press 

 on the projector or the

“Power” remote control. The screen on the left will
appear.

2. Press 

 again while the screen is

displayed.

• If you accidentally pressed 

 and do not want

to turn off the power, wait until the power off screen shown
on the left disappears.

When 

 is pressed twice, the POWER indicator

will light up red and the cooling fan will run for about 90
seconds. The projector will then enter standby mode.

The power can be turned on again by pressing 

 on the projector or the “Power” remote control. When

the power is turned on, the POWER indicator and the LAMP
REPLACEMENT indicator light green.

7b

7a

• The POWER indicator flashes if the bottom filter cover is

not securely installed.

8

This projector has a menu screen that allows you to
adjust the image and various projector settings. The
menu screen can be operated from the projector or the
“Power” remote control with the following buttons.

(For use with the “Power” remote control, slide the

 switch to the ADJ. position.)

1 Press 

 to display the menu bar.

2 Press ß/© to select an adjustment menu on the

menu bar.

3 Press ∂/ƒ to select a specific adjustment item.

4 To display only the adjustment item, press 

after selecting the item. Only the menu bar and
the selected adjustment item will appear.

5 Press ß/© to adjust the item.

6 Press 

 to return to the previous

screen.

7 Press 

 to exit from the GUI.

• For details on items on the menu screen, see the tree chart

on the next page.

4

2, 3, 5

1, 7

R/C

OFF

ON

6

1

4

Contrast

Picture

Auto Sync

Fine Sync

Audio

`30

130

Clock

`90

190

Treble

Options

Lamp Timer

Language

English

PRJ Mode

Status

Ceiling

`Front

Ceiling

`Rear

Deutsch

Español

Nederlands

Français

Italiano

Svenska

Front

Rear

Auto Sync Disp

BLK SCRN Disp

OSD Display

Fit To Screen

[ON/OFF]

[ON/OFF]

[ON/OFF]

[ON/OFF]

[ON/OFF]

Signal

Background

Sharp

Resolution
Hor Freq
Vert Freq

640

2350

58.6 KHz
72 Hz

Startup Image

Sharp

Custom

Custom

Blue

None

None

`30

130

Bass

`30

130

Phase

`60

160

H-Pos

`90

190

V-Pos

Reset

Reset

Save Setting

Select Setting

1
2

•

•

7

Resolution

800

2600

640

2480

Vert Freq

75 Hz
72 Hz

Mode

`60

160

Bright

`30

130

Red

`30

130

Blue

Reset

`30

130

1
2

•

•

7

Resolution

800

2600

640

2480

Vert Freq

75 Hz
72 Hz

• Only the items highlighted in the tree chart above can be adjusted.
• To adjust the items under the sub menu, press © after entering the sub menu.