DOWNLOAD Sharp XG-C50XE (serv.man27) Service Manual ↓ Size: 9.53 MB | Pages: 106 in PDF or view online for FREE

Press |

|

|

|

|.

• The cursor shifts to the sub menu.

Press '

'

'

'

' or "

"

"

"

" to select the set-

• The item selected is set.

Note

• Some adjustment items will display

a confirmation message.
When setting an item, press \  or
| to select “Yes” or “OK” and then
press 

.

• The menu will disappear.

PG-C45X#E_PDF#p42_50.p65

03.2.17, 11:37 AM

45

Selected Item

Description

\ button

| button

Contrast

Bright

Color

Tint

Sharp

Red

Blue

For adjusting the contrast level

For adjusting the brightness of an image

For adjusting the color intensity of the image

For adjusting the tones of an image

For making sharper or softer the contour of an image

For adjusting the redness level

For adjusting the blue level

For adjusting the color temperature of an image

For less contrast

For less brightness

For less color intensity

Skin tones become purplish

For less sharpness

For weaker red

For weaker blue

Decreases color
temperature for warmer,
reddish, incandescent-
like images.

For more contrast

For more brightness

For more color intensity

Skin tones become greenish

For more sharpness

For stronger red

For stronger blue

Increases color
temperature for cooler,
bluish, fluorescent-like
images.

Adjust the “Picture” menu on the menu screen.
➝For operating the menu screen, see pages 

Note

• “Color”, “Tint” and “Sharp” are not displayed

when selecting INPUT 1 or 2 and the “Sig-
nal Type” is “RGB” .

• The picture adjustments can be stored

separately in each input mode.

• When the signal type in INPUT 1 or 2 has

been set to Component, “Sharp” can be
adjusted when 480I,  480P, 540P, 580I,
580P, 720P, 1035I or 1080I signals are
connected.

• To reset all adjustment items, select “Re-

set” and press 

.

•“Red”, “Blue” and “CLR Temp” cannot be

adjusted when “Color Selected” on the
C.M.S. menu is set to “sRGB”.

Select “Signal Type” in the “Picture” menu on the menu screen.
➝ For operating the menu screen, see pages 

Note

•

 RGB

Set when RGB signals are received.

•

 Component

Set when Component signals are received.

PG-C45X#E_PDF#p42_50.p65

03.2.17, 11:37 AM

46

Select “Progressive Mode” in the “Pic-
ture” menu on the menu screen.
➝For operating the menu screen, see
pages 

Note

•

 2D Progressive

This function is useful to display fast-
moving images such as sports and ac-
tion films. This mode optimizes the im-
age in a displayed frame.

•

 3D Progressive

This function is useful to display relatively
slow-moving images such as drama and
documentary more clearly.
This mode optimizes the image by esti-
mating the movement of a number of pre-
ceding and succeeding frames.

•

 Film Mode

Reproduces the image of film source
clearly. Displays the optimized image of
film transformed with three-two pull down
(NTSC and PAL60Hz) or two-two pull
down  (PAL50Hz and SECAM) enhance-
ment to progressive mode images.
* The film source is a digital video record-

ing with the original encoded as is at 24
frames/second. The projector can con-
vert this film source to progressive video
at 60 frames/second with NTSC and
PAL60Hz or at 50 frames/second with
PAL50Hz and SECAM to play back a
high-definition image.

• When using progressive inputs, these

inputs are directly displayed therefore 2D
Progressive, 3D Progressive and Film
Mode cannot be selected. These modes
can be selected in interlace signals other
than 1080

I

.

• In NTSC or PAL60Hz, even if the 3D Pro-

gressive mode has been set, the three-
two pull down enhancement will be en-
abled automatically, when the film source
has been entered.

• In PAL50Hz or SECAM, the two-two pull

down enhancement will be enabled only
in the Film Mode, when the film source
has been entered.

PG-C45X#E_PDF#p42_50.p65

03.2.17, 11:37 AM

47

” is “OFF”, interference such

Select “Clock”, “Phase”, “H-Pos” or “V-
Pos” in the “Fine Sync” menu  on the
menu screen.
➝ For operating the menu screen, see
pages 

Note

• Computer image adjustments can be made

easily by pressing 

. See page 

 for

details.

Select “Save Setting” in the “Fine Sync”
menu on the menu screen.
➝ For operating the menu screen, see
pages 

Selected Item

Description

H-Pos

V-Pos

Adjusts vertical noise.

Adjusts horizontal noise (similar to tracking on your VCR).

Centers the on-screen image by moving it to the left or right.

Centers the on-screen image by moving it up or down.

PG-C45X#E_PDF#p42_50.p65

03.2.17, 11:37 AM

48