Sharp XG-C50XE (serv.man27) User Manual / Operation Manual ▷ View online
Connections and Setup
-25
FORWARD
button
button
Using the Wireless Presentation Function of the
Remote Control
Remote Control
The Wireless Presentation function on the projector works the same as the [Page Up] and
[Page Down] keys on a computer keyboard. It can also be used to move forward or backward
when viewing images of presentation software such as PowerPoint
[Page Down] keys on a computer keyboard. It can also be used to move forward or backward
when viewing images of presentation software such as PowerPoint
TM
.
Using the Wireless Pre-
sentation Function
sentation Function
1
Connect the projector to the
computer using the supplied
USB cable.
computer using the supplied
USB cable.
Note
• This function only works with the
Microsoft Windows OS and Mac
OS. However, this function does not
work with the following operation
systems that do not support USB.
• Versions earlier than Windows 95.
OS. However, this function does not
work with the following operation
systems that do not support USB.
• Versions earlier than Windows 95.
• Versions earlier than Windows
NT4.0.
• Versions earlier than Mac OS 8.5.
2
Press
or
while using
presentation software on your
computer.
computer.
• Press
to move the page up.
• Press
to move the page down.
Supplied
accessory
accessory
USB cable
USB
terminal
terminal
USB cable
BACK
button
button
Notebook computer
PG-C45X#E_PDF#p20_26.p65
03.2.17, 11:33 AM
25
Connecting the Projector to Other Devices
Using as a Wired Remote Control
Connecting the Remote
Control to the Projector
Control to the Projector
When the remote control cannot be used due
to the range or positioning of the projector
(rear projection, etc.), connect a ø3.5 mm
minijack cable (commercially available or
available as Sharp service par t QCNW-
4870CEZZ) from the WIRED R/C JACK on the
top of the remote control to the WIRED RE-
MOTE control input terminal.
to the range or positioning of the projector
(rear projection, etc.), connect a ø3.5 mm
minijack cable (commercially available or
available as Sharp service par t QCNW-
4870CEZZ) from the WIRED R/C JACK on the
top of the remote control to the WIRED RE-
MOTE control input terminal.
ø3.5 mm minijack cable
(commercially available or available as
Sharp ser vice part QCNW-4870CEZZ)
(commercially available or available as
Sharp ser vice part QCNW-4870CEZZ)
To WIRED R/C JACK
WIRED REMOTE control input terminal
-26
PG-C45X#E_PDF#p20_26.p65
03.2.17, 11:33 AM
26
Connections and Setup
-27
Up
Down
Setup
Using the Adjustment
Feet
Feet
The height of the projector can be adjusted
using the adjustment feet at the front and back
of the projector when the surface the projec-
tor is placed on is uneven or when the screen
is slanted.
The projection of the imag e can be made
higher by adjusting the projector when it is in
a location lower than the screen.
using the adjustment feet at the front and back
of the projector when the surface the projec-
tor is placed on is uneven or when the screen
is slanted.
The projection of the imag e can be made
higher by adjusting the projector when it is in
a location lower than the screen.
1
Press HEIGHT ADJUST.
2
Lift the projector to adjust its
height and remove your finger
from HEIGHT ADJUST.
height and remove your finger
from HEIGHT ADJUST.
3
Rotate the adjustment feet at
the back of the projector for
fine adjustment.
the back of the projector for
fine adjustment.
Note
• When returning the projector to its original
position, hold the projector firmly, press
HEIGHT ADJUST and then gently lower it.
HEIGHT ADJUST and then gently lower it.
• The projector is adjustable up to approxi-
mately 12 degrees on the front and 3
degrees on the back from the standard po-
sition.
degrees on the back from the standard po-
sition.
Info
• Do not press HEIGHT ADJUST when the
adjustment foot is extended without firmly
holding the projector.
holding the projector.
• Do not hold the lens when lifting or lower-
ing the projector.
• When lowering the projector, be careful
not to get your finger caught in the area
between the adjustment foot and the
projector.
between the adjustment foot and the
projector.
HEIGHT ADJUST
button
button
Adjustment feet
Adjustment foot
PG-C45X#E_PDF#p27_32.p65
03.2.17, 11:34 AM
27
Zoom in
Zoo
m o
ut
Zoom knob
Focus ring
Adjusting the Lens
The image is focused and adjusted to the
desired size using the focus ring or zoom
knob on the projector.
desired size using the focus ring or zoom
knob on the projector.
1
The focus is adjusted by rotat-
ing the focus ring.
ing the focus ring.
2
Zooming is adjusted by mov-
ing the zoom knob.
ing the zoom knob.
-28
Setup
PG-C45X#E_PDF#p27_32.p65
03.2.17, 11:34 AM
28
Click on the first or last page to see other XG-C50XE (serv.man27) service manuals if exist.