Sharp XG-C50XE (serv.man27) User Manual / Operation Manual ▷ View online
Basic Operation
-49
Selecting Adjustment Settings
Adjustment settings stored in the projector
can be easily accessed.
can be easily accessed.
Select “Select Setting” in the “Fine
Sync” menu on the menu screen.
Sync” menu on the menu screen.
➝ For operating the menu screen, see
pages
pages
42 to 45
.
Note
• If a memory position has not been set, a
resolution and frequency setting will not
be displayed.
be displayed.
• When selecting a stored adjustment set-
ting with “Select Setting”, you can set the
projector in the stored adjustments.
projector in the stored adjustments.
Special Mode Settings
Ordinarily, the type of input signal is detected
and the correct resolution mode is automati-
cally selected. However, for some signals, the
optimal resolution mode in “Special Modes” on
the “Fine Sync” menu screen may need to be
selected to match the computer display mode.
and the correct resolution mode is automati-
cally selected. However, for some signals, the
optimal resolution mode in “Special Modes” on
the “Fine Sync” menu screen may need to be
selected to match the computer display mode.
Set the resolution by selecting “Special
Modes” in the “Fine Sync” menu on the
menu screen.
Modes” in the “Fine Sync” menu on the
menu screen.
➝ For operating the menu screen, see
pages
pages
42 to 45
.
Note
• Avoid displaying computer patterns which
repeat every other line (horizontal stripes).
(Flickering may occur, making the image
hard to see.)
(Flickering may occur, making the image
hard to see.)
• When a DVD player or Digital Video is con-
nected, select 480P as the input signal.
• See “Checking the Input Signal” below for infor-
mation on the currently selected input signal.
Checking the Input Signal
This function allows you to check the current
input signal information.
input signal information.
Select “Signal Info” in the “Fine Sync”
menu on the menu screen.
menu on the menu screen.
➝ For operating the menu screen, see
pages
pages
42 to 45
.
Note
• The projector will display the number of
scanned lines available from audio-visual
equipment such as a DVD player or Digi-
tal Video.
equipment such as a DVD player or Digi-
tal Video.
PG-C45X#E_PDF#p42_50.p65
03.2.17, 11:37 AM
49
Auto Sync Adjustment
Used to automatically adjust a computer image.
Select “Auto Sync” in the “Fine Sync”
menu on the menu screen.
➝ For operating the menu screen, see
pages
menu on the menu screen.
➝ For operating the menu screen, see
pages
42 to 45
.
Note
When setting to “
Normal” or
“
High Speed”:
• Auto Sync adjustment will occur when the
projector is turned on or when the inputs
are switched, when connected to a com-
puter.
are switched, when connected to a com-
puter.
Manual adjustments should be per-
formed:
• When the optimum image cannot be
formed:
• When the optimum image cannot be
achieved with Auto Sync adjustment. See
page
page
48
.
• Auto Sync adjustment may take some
time to complete, depending on the im-
age of the computer connected to the pro-
jector.
age of the computer connected to the pro-
jector.
• When setting “Auto Sync” to “OFF” or
“High Speed”, and if
is pressed Auto
Sync will be executed in “High Speed”
mode. If the button is pressed again
within one minute, Auto Sync will be ex-
ecuted in “Normal” mode.
mode. If the button is pressed again
within one minute, Auto Sync will be ex-
ecuted in “Normal” mode.
Adjusting Computer Images
AUTO SYNC button
Screen display during Auto Sync
-50
Auto Sync Display
Function
Function
Used to set the screen displayed during Auto
Sync.
Sync.
Select “Auto Sync Disp” in the “Fine
Sync” menu on the menu screen.
➝ For operating the menu screen, see
pages
Sync” menu on the menu screen.
➝ For operating the menu screen, see
pages
42 to 45
.
Note
•
..... The image set as a background
image is projected.
•
..... The computer image being ad-
justed is displayed.
PG-C45X#E_PDF#p42_50.p65
03.2.17, 11:37 AM
50
Easy to Use Functions
Easy to Use Functions
PG-C45X#E_PDF#p51_59.p65
03.2.17, 11:38 AM
51
-52
Selecting the Picture Display Mode
Switching the Picture
Display Using Different
Input Signals
Display Using Different
Input Signals
Press
.
• Each time
is pressed, the display
changes as shown on page
52
and
53
.
Info
• In the Dot by Dot Mode, images are dis-
played in the original resolution, therefore
they will not be enlarged.
they will not be enlarged.
• To return to the standard image, press
while “
RESIZE
” is displayed on the screen.
This function allows you to modify or customize the picture display mode to enhance the
input image. Depending on the input signal, you can choose “NORMAL”, “FULL”, “DOT BY
DOT”, “BORDER”, “STRETCH” or “SMART STRETCH” image.
input image. Depending on the input signal, you can choose “NORMAL”, “FULL”, “DOT BY
DOT”, “BORDER”, “STRETCH” or “SMART STRETCH” image.
RESIZE
button
button
Screen display of the picture display mode
4:3
aspect ratio
Other aspect ratios
SVGA (800
× 600)
XGA (1024
× 768)
SXGA (1280
× 960)
UXGA (1600
× 1200)
SXGA (1280
× 1024)
NORMAL
1024
× 768
1024
× 768
1024
× 768
1024
× 768
960
× 768
FULL
—
—
—
—
1024
× 768
DOT BY DOT
800
× 600
—
1280
× 960
1600
× 1200
1280
× 1024
Resolution lower than
XGA
NORMAL
Projects a full screen image
while maintaining the aspect ratio.
FULL
Projects a full screen image
while ignoring the aspect ratio.
DOT BY DOT
Projects the original resolution
signal of the image.
4:3 aspect ratio
Input Signal
Output screen image
XGA
Resolution higher than
XGA
COMPUTER
• “NORMAL” is fixed when XGA (1024 × 768) signals are entered.
4:3 aspect ratio
4:3 aspect ratio
SXGA (1280
××××× 1024)
PG-C45X#E_PDF#p51_59.p65
03.2.17, 11:38 AM
52
Click on the first or last page to see other XG-C50XE (serv.man27) service manuals if exist.