DOWNLOAD Sharp PG-B10S (serv.man35) Service Manual ↓ Size: 2.43 MB | Pages: 29 in PDF or view online for FREE

LCD Projector
PG-B10S
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/
DTV480I/DTV480P/DTV540P/DTV580I/DTV580P/DTV720P/DTV1035I/DTV1080I/
DTV1080I-50
LCD panel 

×

 3, RGB optical shutter method

Panel size: 0.55" (14.0 mm) (8.5 [H] 

×

 11.2 [W] mm)

No. of dots: 480,000 dots (800 [H] 

×

 600 [V])

1–1.25 

×

 zoom lens, F1.6–1.9, f = 16.8–20.9 mm

130 W AC lamp
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75 

Ω

 terminated

P

B

: 0.7 Vp-p, 75 

Ω

 terminated

P

R

: 0.7 Vp-p, 75 

Ω

 terminated

520 TV lines (DTV720P)
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 

Ω

 terminated

HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 

Ω

 terminated

C (chrominance signal): Burst 0.286 Vp-p, 75 

Ω

 terminated

RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 

Ω

terminated
9-pin mini DIN connector
12–108 MHz
43–85 Hz
15–70 kHz
ø3.5 mm minijack: AUDIO, 0.5 Vrms, more than 22 k

Ω

 (stereo)

1.0 W (monaural)
2.8 cm round 

×

 1

AC 100–240 V
1.9 A
50/60 Hz
185 W (Standard mode)/170 W (Eco mode) with AC 100 V
175 W (Standard mode)/160 W (Eco mode) with AC 240 V
4 W (AC 100 V) – 6 W (AC 240 V)
695 BTU/hour (Standard mode)/640 BTU/hour (Eco mode) with AC 100 V
660 BTU/hour (Standard mode)/600 BTU/hour (Eco mode) with AC 240 V
41°F to 95°F (+5°C to +35°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
38 kHz
11 

37

/

64

" 

×

 3 

5

/

8

" 

×

 8 

3

/

4

" (294 (W) 

×

 92 (H) 

×

 222 (D) mm) (main body only)

11 

39

/

64

" 

×

 4 

11

/

64

" 

×

 9 

11

/

32

" (294.5 (W) 

×

 105.8 (H) 

×

 237 (D) mm) (including adjustment foot

and projecting parts)
6.0 lbs. (2.7 kg)
Remote control, Two R-6 batteries, Power cord for U.S., Canada etc. (6', 1.8 m), Power cord
for Europe, except U.K. (6', 1.8 m), Power cord for U.K., Hong Kong and Singapore (6', 1.8
m), Power cord for Australia, New Zealand and Oceania (6', 1.8 m), RGB cable (9'10",
3.0 m), Carrying case, Lens cap (attached), Extra air filter, Lens shipping block (attached),
Projector manual and technical reference CD-ROM, “QUICK GUIDE” label, Operation manual
Lamp unit (Lamp/cage module) (BQC-PGB10S//1), Remote control (RRMCGA187WJSA),
Two R-6 batteries (“AA” size, UM/SUM-3, HP-7, or similar), Power cord for U.S., Canada etc.
(QACCDA016WJPZ), Power cord for Europe, except U.K. (QACCVA006WJPZ), Power cord
for U.K., Hong Kong and Singapore (QACCBA015WJPZ), Power cord for Australia, New
Zealand and Oceania (QACCLA005WJPZ), RGB cable (QCNWGA012WJPZ), Carrying case
(GCASNA009WJSA), Lens cap (CCAPHA004WJ01), Air filter (PFILDA010WJZZ), Lens ship-
ping block (SPAKXA333WJZZ), Projector manual and technical reference CD-ROM
(UDSKAA039WJZZ), “QUICK GUIDE” label (TLABZA439WJZZ), Operation manual (TINS-
A917WJZZ)

Product type

Model

Video system

Display method

LCD panel

Lens

Projection lamp

Component input/output

signal (INPUT1)

Horizontal resolution

Computer RGB input/output

signal (INPUT 1)

S-video input signal

(INPUT 2)

Video input signal

(INPUT 3)

Computer control signal (RS-232C)

Pixel clock

Vertical frequency

Horizontal frequency

Audio input signal

Audio output

Speaker system

Rated voltage

Input current

Rated frequency

Power consumption

Power consumption (standby)

Heat dissipation

Operating temperature

Storage temperature

Cabinet

I/R carrier frequency

Dimensions (approx.)

Weight (approx.)

Supplied accessories

Replacement parts

As a part of policy of continuous improvement, SHARP reserves the right to make design
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be
some deviations from these values in individual units.

11

 

37

/

64

 

(294)

8

 

3

/

4

 

(222)

19

/

32

 

(15)

3

 

5

/

8

 

(92)

2

 

17

/

32

 

(64)

2

 

25

/

64

 

(60.4)

3

 

27

/

64

 

(86.6)

2

 

17

/

32

 

(64.2)

7

 

45

/

64

 

(195.6)

8

 

11

/

64

 

(207.4)

1

 

59

/

64

 

(48.8)

1

 

45

/

64

 

(43.2)

1

 

31

/

32

 

(49.7)

2

 

1

/

4

 

(57)

1

 

1

/

8

 

(28.5)

2

 

9

/

16

 

(65)

1

 

25

/

32

 

(45)

3

 

59

/

64

 

(99.5)

7

 

15

/

32

 

(189.5)

8

 

9

/

64

 

(206.5)

7

 

43

/

64

 

(194.5)

1

 

61

/

64

 

(49.5)

ø 65

If the “Keycode” set in the projector is not correctly
entered, the projector will not operate even if sig-
nals are entered.

Width and height ratio of an image. The normal
aspect ratio of a computer and video image is 4:3.
There are also wide images with an aspect ratio
of 16:9 and 21:9.

Optimizes projected computer images by auto-
matically adjusting certain characteristics.

Initial setting image projected when no signal is
being output.

Projects a 4:3 image fully within a 16:9 screen by
keeping the aspect ratio at 4:3.

Clock adjustment is used to adjust vertical noise
when clock level is incorrect.

Function that can be used to adjust the color tem-
perature to suit the type of image input to the pro-
jector. Decrease the color temperature to create
warmer, reddish images for natural flesh tones,
or increase to create cooler, bluish images for a
brighter picture.

Mode that projects images in their native resolution.

Image quality enhancement function that offers a
richer image by brightening the darker portions of
the image without altering the brightness of the
brighter portions. You can select four different
modes: STANDARD, PRESENTATION, CINEMA
and GAME.

High quality resizing of lower and higher resolu-
tion images to fit the projector’s native resolution.

Mode that can lock the operation of projector but-
tons to prevent unauthorized adjustment.

Function to digitally correct a distorted image
when the projector is set up at an angle, smooth-
ens out jaggies on keystone images and com-
presses the image not only horizontally but verti-
cally keeping the 4:3 aspect ratio.

Function to adjust the position of the projection
image by using the lens shift lever to move the
lens from side to side and up and down (360°).

A password is set so that changes cannot be made
in the “Anti-Theft” setting.

Phase shift is a timing shift between isomorphic
signals with the same resolution. When phase level
is incorrect, the projected image typically displays
horizontal flicker.

Allows you to modify or customize the picture dis-
play mode to enhance the input image. You can
select four different modes: NORMAL, DOT BY
DOT, BORDER and STRETCH.

An international standard of color reproduction
regulated by the IEC (International
Electrotechnical Commission). As the fixed color
area has been decided by the IEC, the color
changes according to LCD features, so that the
images are displayed in a natural tint based on
an original image, when “sRGB” is set to “ON”.

Mode that stretches the 4:3 image horizontally to
display it fully on a 16:9 screen.

AC socket ............................................................ 55
Adjustment buttons .............................................. 32
Air filter ................................................................. 61
Anti-Theft ............................................................. 46
Aspect ratio .......................................................... 26
AUDIO INPUT terminal ........................................ 51
Auto Power Off ..................................................... 43
Auto Sync (Auto Sync adjustment) ..................... 40
AUTO SYNC button ............................................. 40
AV MUTE button .................................................. 20

Carrying case ....................................................... 59
Clock .................................................................... 39
CLR Temp (Color Temperature) ........................... 36
Color .................................................................... 36
Computer Image Adjustment ............................... 39
Contrast ............................................................... 36

DIN-D-sub RS-232C adaptor .............................. 54
DOT BY DOT ....................................................... 26

Eco Mode ............................................................. 43
ENLARGE buttons ............................................... 28
ENTER button ...................................................... 33
Exhaust vent ........................................................ 60

INPUT 1 terminal ................................................. 51
INPUT 1 – 3 modes ............................................. 19
INPUT 2 terminal ................................................. 52
INPUT 3 terminal ................................................. 52
INPUT button ....................................................... 19
Intake vent ........................................................... 60

Lamp .................................................................... 65
Lamp indicator ..................................................... 63

Password ............................................................. 45
PDF ........................................................................ 8
Phase ................................................................... 39
Picture Adjustment .............................................. 36
Power cord ........................................................... 55
Power indicator .................................................... 63
PRJ mode (Reversing Projected Images) ................. 49

Rear adjustment foot ........................................... 23
Red ...................................................................... 36
Remote control .................................................... 14
Remote control sensor ........................................ 15
Replacing the lamp .............................................. 65
RESIZE button ..................................................... 26
RGB cable ............................................................ 51
RGB OUTPUT terminal ....................................... 55
RS-232C terminal ................................................ 54

Temperature warning indicator ............................ 63
Tint ....................................................................... 36