DOWNLOAD Sharp PG-B10S (serv.man35) Service Manual ↓ Size: 2.43 MB | Pages: 29 in PDF or view online for FREE

Model
PG-B10S (serv.man35)
Pages
29
Size
2.43 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector / (part 4) Corrections, screen setup, appendix
File
pg-b10s-sm35.pdf
Date

Sharp PG-B10S (serv.man35) User Manual / Operation Manual ▷ View online

-70
Computer Compatibility Chart
Note
This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD)
mode. Should this occur, turn off the LCD display on the notebook computer and output the display data in
“CRT only” mode. Details on how to change display modes can be found in your notebook computer’s
operation manual.
When this projector receives 640 
×
 350 VESA format VGA signals, “640 
×
 400” appears on the screen.
When projecting the RGB interlace signal using INPUT 1 with “Signal Type” set to “Auto” or “RGB”, the
image may not be projected as desired. In this case, select either INPUT 2 (S-Video) or INPUT 3 (Video).
Multiple signal support
Horizontal Frequency: 15–70 kHz, Vertical Frequency: 43–85 Hz, Pixel Clock: 12–108 MHz
Compatible with sync on green signal
SXGA+, SXGA and XGA compatible in 
intelligent compression
Intelligent Compression and Expansion System resizing technology
The following is a list of modes that conform to VESA.  However, this projector supports other signals
that are not VESA standards.
DTV
Computer
27.0
31.5
37.5
27.0
31.5
37.9
27.0
31.5
27.0
31.5
37.9
26.2
31.5
34.7
37.9
37.5
43.3
31.4
35.1
37.9
46.6
48.1
46.9
53.7
35.5
40.3
48.4
56.5
60.0
68.7
55.0
66.2
67.5
64.0
64.0
34.9
49.7
60.2
68.7
60
70
85
60
70
85
60
70
60
70
85
50
60
70
72
75
85
50
56
60
70
72
75
85
43
50
60
70
75
85
60
70
75
60
60
67
75
75
75
Upscale
True
Intelligent Compression
Upscale
Intelligent Compression
640 
×
 350
640 
×
 400
720 
×
 350
720 
×
 400
640 
×
 480
800 
×
 600
1,024 
×
 768
1,152 
×
 864
1,280 
×
 1,024
1,400 
×
 1,050
640 
×
 480
832 
×
 624
1,024 
×
 768
1,152 
×
 870
MAC 13"
MAC 16"
MAC 19"
MAC 21"
PC
VGA
SVGA
XGA
SXGA
SXGA+
VGA
SVGA
XGA
SXGA
Display
PC/MAC/WS
Resolution
VESA Standard
Vertical Frequency
(Hz)
Horizontal Frequency
(kHz)
15.7
31.5
33.8
15.6
31.3
45.0
28.1
33.8
28.1
33.8
480
I
480P
540P
580
I
580P
720P
1035
I
1035
I
1080
I
1080
I
60
60
60
50
50
60
50
60
50
60
Signal
Vertical Frequency (Hz)
Horizontal Frequency (kHz)
-71
Appendix
Troubleshooting
Check
Projector power cord is not plugged into the wall outlet.
Power to the external connected devices is off.
The selected input mode is wrong.
The AV MUTE function is working.
Cables incorrectly connected to rear panel of the projector.
Remote control batteries have run out.
External output has not been set when connecting notebook computer.
The filter cover or the lamp unit cover is not installed correctly.
Cables incorrectly connected to the rear panel of the projector.
“Bright” is set to minimum position.
Picture adjustments are incorrectly set.
(Video Input only)
Video input system is incorrectly set.
(INPUT 1 only)
Input signal type (RGB/Component) is incorrectly set.
Adjust the focus.
The projection distance exceeds the focus range.
(Computer Input only)
Perform “Fine Sync” Adjustments (“Clock” Adjustment)
Perform “Fine Sync” Adjustments (“Phase” Adjustment)
Noise may appear depending on the computer.
Cables incorrectly connected to rear panel of projector.
Volume is set to minimum.
If the picture is normal, the sound is due to cabinet shrinkage
caused by room temperature changes. This will not affect
operation or performance.
See “Maintenance Indicators”.
The keylock is set.
If the keylock is set to ON, all the buttons are locked.
Problem
An unusual sound is
occasionally heard
from the cabinet.
Maintenance
indicator illuminates.
The projector cannot be
turned on or put into the
standby mode using the
ON or STANDBY button
on the projector.
Page
55
19
20
51-55
15
51
61,66
51-55
36
36
42
38
22
57
39
39
51-55
19
63
29
Sound is heard but no
picture appears.
Color is faded or poor.
Picture is blurred;
noise appears.
Picture appears but no
sound is heard.
No picture and no sound
or projector does not start.
-72
Check
Problem
Page
Picture is green on
INPUT 1 COMPONENT.
Picture is pink (no green)
on INPUT 1 RGB.
Picture is dark.
Picture is too bright and
whitish.
Change the input signal type setting.
The lamp indicator is illuminating in red. Replace the lamp.
Picture adjustments are incorrectly set.
38
63
36
Troubleshooting
-73
Appendix
For SHARP Assistance
If you encounter any problems during setup or operation of this projector, first refer to the
“Troubleshooting” section on pages 
71
 and 
72
. If this operation manual does not answer
your question, please contact the SHARP Service departments listed below.
U.S.A.
Sharp Electronics Corporation
1-888-GO-SHARP (1-888-467-4277)
lcdsupport@sharpsec.com
http://www.sharplcd.com
Canada
Sharp Electronics of Canada Ltd.
(905) 568-7140
http://www.sharp.ca
Mexico
Sharp Electronics Corporation Mexico
Branch
(525) 716-9000
http://www.sharp.com.mx
Latin America
Sharp Electronics Corp. Latin American
Group
(305) 264-2277
www.servicio@sharpsec.com
http://www.siempresharp.com
Germany
Sharp Electronics (Europe) GMBH
01805-234675
http://www.sharp.de
U.K.
Sharp Electronics (U.K.) Ltd.
0161-205-2333
custinfo@sharp-uk.co.uk
http://www.sharp.co.uk
Italy
Sharp Electronics (Italy) S.P.A.
(39) 02-89595-1
http://www.sharp.it
France
Sharp Electronics France
01 49 90 35 40
hotlineced@sef.sharp-eu.com
http://www.sharp.fr
Spain
Sharp Electronica Espana, S.A.
93 5819700
sharplcd@sees.sharp-eu.com
http://www.sharp.es
Switzerland
Sharp Electronics (Schweiz) AG
0041 1 846 63 11
cattaneo@sez.sharp-eu.com
http://www.sharp.ch
Sweden
Sharp Electronics ( Nordic ) AB
(46) 8 6343600
vision.support@sen.sharp-eu.com
http://www.sharp.se
Austria
Sharp Electronics Austria (Ges.m.b.H.)
0043 1 727 19 123
pogats@sea.sharp-eu.com
http://www.sharp.at
Benelux
SHARP Electronics Benelux BV
0900-SHARPCE (0900-7427723)
Nederland
9900-0159 Belgium
http://www.sharp.nl
http://www.sharp.be
http://www.sharp.lu
Australia
Sharp Corporation of Australia
Pty. Ltd.
1300-135-022
http://www.sharp.net.au
New Zealand
Sharp Corporation of New Zealand
(09) 634-2059, (09) 636-6972
http://www.sharpnz.co.nz
Singapore
Sharp-Roxy Sales (S) Pte. Ltd.
65-226-6556
ckng@srs.global.sharp.co.jp
http://www.sharp.com.sg
Hong Kong
Sharp-Roxy (HK) Ltd.
(852) 2410-2623
dcmktg@srh.global.sharp.co.jp
http://www.sharp.com.hk
Taiwan
Sharp Corporation (Taiwan)
0800-025111
http://www.sharp-scot.com.tw
Malaysia
Sharp-Roxy Sales & Service Co.
(60) 3-5125678
U.A.E.
Sharp Middle East Fze
971-4-81-5311
helpdesk@smef.global.sharp.co.jp
Thailand
Sharp Thebnakorn Co. Ltd.
02-236-0170
svc@stcl.global.sharp.co.jp
http://www.sharp-th.com
Korea
Sharp Electronics Incorporated of
Korea
(82) 2-3660-2002
lcd@sharp-korea.co.kr
http://www.sharpkorea.co.kr
India
Sharp Business Systems (India)
Limited
(91) 11- 6431313
service@sharp-oa.com
Page of 29
Display

Click on the first or last page to see other PG-B10S (serv.man35) service manuals if exist.