Sharp PG-B10S (serv.man15) Service Manual ▷ View online
No.
Adjusting point
Adjusting conditions
Adjusting procedure
29
PG-B10S
1. Select OFF from the process mode.
Make sure the off-timer starts with 5 minutes
onscreen and count one minute in one second.
And then indication is 0 minute, the power supply
of the set is cut off.
onscreen and count one minute in one second.
And then indication is 0 minute, the power supply
of the set is cut off.
24
Off-timer per-
formance
formance
1. Heat the thermistor with a
hair dryer.
1. Make sure that the temperature is indicated.
25
Thermistor
performance
checking
performance
checking
1. Make the following settings.
Process adjustment
Remote control adjustment
SS3
Factory setting at 3
27
Delivery set-
tings
tings
1. Feed the phase check pat-
tern signal.
1. In the VGA, SVGA and XGA modes, make sure the
Clock, Phase, H-Pos and V-Pos settings can be au-
tomatically adjusted.
tomatically adjusted.
26
Auto sync
performance
checking
performance
checking
No.
Adjusting point
Adjusting conditions
Adjusting procedure
22
RGB tone
reproduction
adjustment
reproduction
adjustment
1. Make sure the 100% and 95% white as well as the
0% and 5% black gradations are visible.
1. Feed the SMPTE pattern
signal.
23
White balance
checking
checking
1. Use the adjustment condi-
tions in the item 10 for RGB
input and item 11 for sRGB
input.
input and item 11 for sRGB
input.
Check that there is no deviation of white balance with
the monitor.
the monitor.
21
Sample hold
pulse phase
checking
pulse phase
checking
1. Check the fixed value.
GCK-PHASE :282
RCK-PHASE :282
BCK-PHASE :282
RCK-PHASE :282
BCK-PHASE :282
1. Feed the SVGA 75-Hz
black signal.
2. Select the following group
and subjects.
Group : OUTPUT3
Subject : GCK-PHASE
Group : OUTPUT3
Subject : GCK-PHASE
RCK-PHASE
BCK-PHASE
BCK-PHASE
30
PG-B10S
1. Calling and quitting the process mode with the control keys on this model.
1-1. Calling and quitting
With no menu onscreen, press the "UP", "UP", "DOWN", "DOWN", "RIGHT", "LEFT" and "ENTER" keys, in this
order, on the remote controller (Type A10, or C50/45 and P25/20 series remote controllers).
order, on the remote controller (Type A10, or C50/45 and P25/20 series remote controllers).
1-2. Others
Press the S2002 process key (toggle) on the main PWB to call and quit the process menu.
2. Resetting the lamp timer for this model
2-1. Resetting procedure
While holding down the Vol+ and AUTOSYNC keys, press the POWER ON and Vol- keys. The "LAMP 000H"
indicator appears for 60 seconds after the power is turned on.2-1.
indicator appears for 60 seconds after the power is turned on.2-1.
Resetting procedure
While holding down the Vol+ and AUTOSYNC keys, press the POWER ON and Vol- keys. The "LAMP 000H"
indicator appears for 60 seconds after the power is turned on.
indicator appears for 60 seconds after the power is turned on.
3. Forced disabling of the Anti-Theft of this model
3-1. Disabling procedure
With Anti-Theft input window onscreen, press the "MENU", "ENTER", "ENTER", "MENU", "UNDO", "UNDO"
and "MENU" keys, in this order, on the remote controller.
and "MENU" keys, in this order, on the remote controller.
4. Forced disabling of the password of this model
4-1. Disabling procedure
In whatever state, press the "ON", "+", "–", "ON", "+", "–" and "INPUT" keys in this order.
31
PG-B10S
Process menu1
Readjust only the shaded items from the process menu below.
Adjustment Process Menu
First layer
DTV
Pedestal
DVD
VERSION
VIDEO
SS
AD
TEMP
OUTPUT1
PATTERN
OUTPUT2
LAMP
OUTPUT3
LINE
VIDEO1
EXIT
Second layer
Initial Value
DTV
Contrast
45
Bright
32
Color
0
Tint
5
Sharpness
1
EXIT
DVD
Contrast
46
Bright
34
Color
0
Tint
5
Sharpness
1
EXIT
VIDEO
Contrast
43
Bright
142
Color
135
Tint
128
Sharpness
3
H-POS
125
EXIT
AD
R-Bright
63
G-Bright
63
B-Bright
63
R-Contrast
170
G-Contrast
170
B-Contrast
170
EXIT
OUTPUT1
R1-BLK
190
R1-GAIN
175
G1-BLK
190
G1-GAIN
175
B1-BLK
190
B1-GAIN
175
S-R1-BLK
190
S-R1-GAIN
175
S-G1-BLK
190
S-G1-GAIN
175
S-B1-BLK
190
S-B1-GAIN
175
EXIT
OUTPUT2
PSIG-H
140
PSIG-L
105
LC-SW
1
LC-HPOS-R
2
RLV1
0
RLV2
4
RLV3
0
LC-HPOS-G
2
GLV1
0
GLV2
4
GLV3
0
LC-HPOS-B
2
BLV1
0
BLV2
4
BLV3
0
EXIT
OUTPUT3
RC
128
GC
128
BC
128
RCK-PHASE
282
GCK-PHASE
282
BCK-PHASE
282
ENBXR-PH
13
ENBXG-PH
13
ENBXB-PH
13
ENBX-WIDTH
4
DGC-SW
1
DGCJ-R
0
DGCJ-G
0
DGCJ-B
0
CC
1
GAMMA
1
EXIT
VIDEO1
NT3.58 Delay
0
NT4.43 Delay
0
PAL Delay
0
SECAM Delay
0
EXIT
Pedestal
Contrast
+10
Bright
-20
R-Bright
-10
G-Bright
-10
B-Bright
-10
R-Contrast
+10
G-Contrast
+10
B-Contrast
+10
EXIT
VERSION
Build
Boot Code
Config
Boot Code
Config
32
PG-B10S
Process menu2
second layer
Initial Value
VERSION
Rom Code
GUI
EXIT
GUI
EXIT
SS
SS2
SS3 EU
SS4 US
SS5 JPN
SS6 CHIN
EXIT
SS3 EU
SS4 US
SS5 JPN
SS6 CHIN
EXIT
TEMP
Temp1
Parameter of sensor 1
Temp2
Parameter of sensor 2
Temp3
No Use
Temp4
No Use
EXIT
PATTERN
Cross Hatch
Color Bar
EXIT
Color Bar
EXIT
LAMP
Current Time
Current time of use
History1
One earlier
History2
Two earlier
History3
Three earlie
History4
Four earlier
TOTAL TIME
Total operating hours
EXIT
LINE
OFF
LED CHECK
EXIT
LED CHECK
EXIT
Display
