Sharp MX-M623U / MX-M753U (serv.man67) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Document Systems Support
No.
Item
Details
15
Web page-related
When selecting the "Save and Delete the Data" in the job log menu of the Web
Page and then cancelling it, the data would be deleted. This problem has been
corrected.
Page and then cancelling it, the data would be deleted. This problem has been
corrected.
16
Web page-related
When printing from a web page, saddle stitch function was greyed out and
unusable. The saddle stitch function has been enabled.
unusable. The saddle stitch function has been enabled.
17
Simulation-related
Even though the timing of the E-Mail alert for Toner Low with SIM26-29 "E" was
changed, the detection timing of Toner Low on PAU5 did not change. This
problem has been corrected.
changed, the detection timing of Toner Low on PAU5 did not change. This
problem has been corrected.
18
Job log-related
If the single quotation mark was included as the machine name etc, the data might
not be recorded in the job log. This problem has been corrected.
not be recorded in the job log. This problem has been corrected.
19
Other
When acquiring the machine information using MIB, the value of “if Out Errors”
would be much higher . This problem has been corrected.
would be much higher . This problem has been corrected.
20
Other
The condition of the contrast of LCD did not stay after the power OFF/ON, and
returned to the default condition. This problem has been corrected.
returned to the default condition. This problem has been corrected.
21
Other
After open/close of the left door, the backside of the first output page might get
soiled.
soiled.
This problem has been corrected.
.
Sharp Electronics (UK) Ltd., Document Systems Support
No.
Item
Details
15
Web page-related
When selecting the "Save and Delete the Data" in the job log menu of the Web
Page and then cancelling it, the data would be deleted. This problem has been
corrected.
Page and then cancelling it, the data would be deleted. This problem has been
corrected.
16
Web page-related
When printing from a web page, saddle stitch function was greyed out and
unusable. The saddle stitch function has been enabled.
unusable. The saddle stitch function has been enabled.
17
Simulation-related
Even though the timing of the E-Mail alert for Toner Low with SIM26-29 "E" was
changed, the detection timing of Toner Low on PAU5 did not change. This
problem has been corrected.
changed, the detection timing of Toner Low on PAU5 did not change. This
problem has been corrected.
18
Job log-related
If the single quotation mark was included as the machine name etc, the data might
not be recorded in the job log. This problem has been corrected.
not be recorded in the job log. This problem has been corrected.
19
Other
When acquiring the machine information using MIB, the value of “if Out Errors”
would be much higher . This problem has been corrected.
would be much higher . This problem has been corrected.
20
Other
The condition of the contrast of LCD did not stay after the power OFF/ON, and
returned to the default condition. This problem has been corrected.
returned to the default condition. This problem has been corrected.
21
Other
After open/close of the left door, the backside of the first output page might get
soiled.
soiled.
This problem has been corrected.
.
Sharp Electronics (UK) Ltd., Document Systems Support
No.
Item
Details
15
Web page-related
When selecting the "Save and Delete the Data" in the job log menu of the Web
Page and then cancelling it, the data would be deleted. This problem has been
corrected.
Page and then cancelling it, the data would be deleted. This problem has been
corrected.
16
Web page-related
When printing from a web page, saddle stitch function was greyed out and
unusable. The saddle stitch function has been enabled.
unusable. The saddle stitch function has been enabled.
17
Simulation-related
Even though the timing of the E-Mail alert for Toner Low with SIM26-29 "E" was
changed, the detection timing of Toner Low on PAU5 did not change. This
problem has been corrected.
changed, the detection timing of Toner Low on PAU5 did not change. This
problem has been corrected.
18
Job log-related
If the single quotation mark was included as the machine name etc, the data might
not be recorded in the job log. This problem has been corrected.
not be recorded in the job log. This problem has been corrected.
19
Other
When acquiring the machine information using MIB, the value of “if Out Errors”
would be much higher . This problem has been corrected.
would be much higher . This problem has been corrected.
20
Other
The condition of the contrast of LCD did not stay after the power OFF/ON, and
returned to the default condition. This problem has been corrected.
returned to the default condition. This problem has been corrected.
21
Other
After open/close of the left door, the backside of the first output page might get
soiled.
soiled.
This problem has been corrected.
.
Sharp Electronics (UK) Ltd., Document Systems Support
No.
Item
Details
15
Web page-related
When selecting the "Save and Delete the Data" in the job log menu of the Web
Page and then cancelling it, the data would be deleted. This problem has been
corrected.
Page and then cancelling it, the data would be deleted. This problem has been
corrected.
16
Web page-related
When printing from a web page, saddle stitch function was greyed out and
unusable. The saddle stitch function has been enabled.
unusable. The saddle stitch function has been enabled.
17
Simulation-related
Even though the timing of the E-Mail alert for Toner Low with SIM26-29 "E" was
changed, the detection timing of Toner Low on PAU5 did not change. This
problem has been corrected.
changed, the detection timing of Toner Low on PAU5 did not change. This
problem has been corrected.
18
Job log-related
If the single quotation mark was included as the machine name etc, the data might
not be recorded in the job log. This problem has been corrected.
not be recorded in the job log. This problem has been corrected.
19
Other
When acquiring the machine information using MIB, the value of “if Out Errors”
would be much higher . This problem has been corrected.
would be much higher . This problem has been corrected.
20
Other
The condition of the contrast of LCD did not stay after the power OFF/ON, and
returned to the default condition. This problem has been corrected.
returned to the default condition. This problem has been corrected.
21
Other
After open/close of the left door, the backside of the first output page might get
soiled.
soiled.
This problem has been corrected.
.
Display