DOWNLOAD Sony DSC-S40 (serv.man7) Service Manual ↓ Size: 139.83 KB | Pages: 3 in PDF or view online for FREE

Model
DSC-S40 (serv.man7)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
139.83 KB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / SUPPLEMENT-1
File
dsc-s40-sm7.pdf
Date

Sony DSC-S40 (serv.man7) Service Manual ▷ View online

SERVICE MANUAL
Auto-ADJ
DSC-S40
Sony EMCS Co.
9-876-868-83
2007H0500-1
© 2007.8
Published by Kohda TEC
SUPPLEMENT-1
File this supplement with the service manual.
(DI07-045)
Ver. 1.2  2007.08
• Change of Automatic Adjustment Program
• Addition of “DESTINATION DATA WRITE”
• Addition of Note for Flange Back Adjust-
ment Jig
• Precaution on Replacing the SY-116 Board
• Change of Automatic Adjustment Program
Version of Automatic Adjustment Program has
been changed from Ver_1.0r01 into Ver_1.2r02.
: Points changed portion.
&
: Points added portion.
!
: Points deleted portion.
6-1. CAMERA  SECTION  ADJUSTMENTS
1-2.
ADJUSTMENT  PROGRAMS
1-2-1.
Automatic Adjustment Program
(Service manual page 6-9)
2.
Start of Automatic Adjustment Program
Double-click the application file (DSC-S40 Auto-Adj
Ver_1.2r02.exe), and the Automatic Adjustment Program will start.
Note: [] (numeric value) of the file name varies depending on the
version of Automatic Adjustment Program.
3.
Function of Each Button on Main Menu Screen
When the Automatic Adjustment Program started, the Main Menu
screen in Fig. 6-1-9 will appear. On this screen, select each adjust-
ment section.
Fig. 6-1-9
5
This part indicates the version of Automatic Adjustment
Program.
6
[DESTINATION DATA WRITE] button
The “DESTINATION DATA WRITE” screen appears.
DSC-S40
#
1
5
6
2
3
4
&
&
— 2 —
DSC-S40
DESTINATION  DATA  WRITE
If this processing is executed, the SY-116 board is set to the fac-
tory default setting according to the specified destination.
Setting items:
• Font data for camera display
• Initial setting of display language
1.
Function of Each Button on Destination Data Write
Screen
Click the [DESTINATION DATA WRITE] button on the Main Menu
screen, and the “DESTINATION DATA WRITE” screen in fol-
lowing figure will appear.
1
[To Menu] button
Return to the main menu.
2
Destination List
Select the written destination
3
[Data Write] button
Write the destination data to the camera.
4
[   ] button
Indicate the destination table.
5
[Procedure] button
Indicate the procedure.
2.
Destination Data Write
[Writing method]
1) Prepare a Memory Stick formatted by a camera.
2) Copy all of the font data CX_FONT1.ash to CX_FONT5.ash
supplied with this program to the root directory of the Memory
Stick.
3) Insert the Memory Stick in the set.
4) Select the target destination from the pulldown list.
5) Click the [Data Write] button.
6) When the “Set the camera to PB mode” message is appeared,
confirm that the camera mode is PB. Then click the [OK] button
to continue the processing.
7) Following message will be appeared after completing data
writing.
8) Remove the Memory Stick from the set and disconnect the USB
cable.
9) Execute the Initialize operation using the Setup screen.
?
• Addition of “DESTINATION DATA WRITE”
Precaution on Replacing the SY-116 Board
At first, execute “DESTINATION DATA WRITE” when the SY-116 board was replaced.
1
2
4
3
5
— 3 —
DSC-S40
Japanese
English
French
German
Spanish
Italian
Portuguese
Simplified
Chinese
Traditional
Chinese
Dutch
Russian
Korean
Arabic
Swedish
GP1
J1
J
z
a
U2
US
z
a
a
a
a
a
CA2
CND
z
a
a
a
a
a
AU2
AUS
z
a
a
a
a
a
CEE2
z
a
a
a
a
a
a
a
a
CEE3
z
a
a
a
a
a
a
a
a
CEE4
a
a
a
z
a
a
a
a
a
CEE5
z
a
a
a
a
a
a
a
a
CEE6
z
a
a
a
a
a
a
a
a
CEH
UK
z
a
a
a
a
a
a
a
a
E15
z
a
a
a
a
a
E32
z
a
a
a
a
a
E33
a
z
a
a
a
a
BR1
BR
a
a
z
a
a
a
HK1
HK
z
a
a
a
a
a
CN1
CH
a
a
a
z
a
a
KR2
KR
a
a
a
a
a
z
JE3
JE
z
a
a
a
a
a
GP4
E
GP5
GP2
GP3
AEP
LANGUAGE GP
DESTINATION
AREA
SELECTABLE LANGUAGE
&
: Points added portion.
: Points changed portion.
1-3.
CAMERA  SYSTEM  ADJUSTMENTS
1-3-3.
Adjusting Method
1.
CAMERA Adjustment 1
(Service manual page 6-13)
Preparation of Flange Back Adj.
(Using the flange back adjustment jig)
(Luminance: about 300 lux)
Note 3: 
When using the flange back adjustment jig, take care of
the following points:
• For the illumination, use a light source such as an in-
candescent lamp or inverter type fluorescent light free
from flickering.
• Do not make an adjustment in the environment where
fluorescent lamp flickering occurs even if the illumi-
nance can be ensured with the room illumination only.
Use an incandescent lamp or inverter type fluorescent
light at a place free from the influence of room illumi-
nation.
+
1) Install the flange back adjustment jig so that the distance be-
tween it and the front of lens of camera is less than 3 cm.
Note 4: Take care not to hit the flange back adjustment jig
when extending the lens.
2) Make the height of flange back adjustment jig and the camera
equal.
3) Check that the center of chart meets the center of shot image
screen with the zoom lens at TELE end and WIDE end respec-
tively.
Fig. 6-1-15
• Addition of Note for Flange Back Adjustment Jig
Flange back adjustment jig
Below 3 cm
Camera
Display

Sony DSC-S40 (serv.man7) Service Manual ▷ Download

  • DOWNLOAD Sony DSC-S40 (serv.man7) Service Manual ↓ Size: 139.83 KB | Pages: 3 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DSC-S40 (serv.man7) in PDF for free, which will help you to disassemble, recover, fix and repair Sony DSC-S40 (serv.man7) Digital Camera. Information contained in Sony DSC-S40 (serv.man7) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.