Sharp MX-M364N / MX-565N (serv.man4) Service Manual ▷ View online
MX-M565N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 16
N. Fuses/Thermostats
Signal name
Name
Specifications
Section
TS UM
Thermostat
Fusing roller overheat protection
(For HL_UM)
(For HL_UM)
Fusing unit
TS US
Thermostat
Fusing roller overheat protection
(For HL_US/HL_UW)
(For HL_US/HL_UW)
Fusing unit
NO
Signal name
Name
Specifications
Section
1
F401
Fuse
T6.3AH 250V
DC power PWB
2
F402
Fuse
T6.3AH 250V
DC power PWB
3
F403
Fuse
T6.3AH 250V
DC power PWB
4
F404
Fuse
T6.3AH 250V
DC power PWB
5
F405
Fuse
T6.3AH 250V
DC power PWB
6
F1
Fuse
20A 250V (100V) / T10AH 250V(200V)
AC power PWB
7
F2
Fuse
T10AH250V (200V only)
AC power PWB
8
F001
Fuse
15A 250V (100V) / T10.AH 250V (200V)
DC power PWB
9
F051
Fuse
T2AH 250V
DC power PWB
10
F201
Fuse
T10AH 250V (100V) / T6.3AH 250V (200V)
DC power PWB
11
F301
Fuse
T4AH 250V
DC power PWB
TS_UM
TS_US
5
4
3
2
1
4
3
2
1
10
9
6
7
7
8
11
MX-M565N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 17
O. Rollers
No.
Name
Function/Operation
1
Paper feed roller (Manual paper feed
tray)
tray)
Feeds paper to the paper transport section.
2
Separation roller (Manual paper feed
tray)
tray)
Separates paper to prevent Double Feed.
3
Transport roller 10 (Drive)
Transports paper from manual paper feed section to the transport roller 9.
4
Transport roller 10 (Idle)
Applies pressure to paper and the transport roller to provide the transport power of the transport roller to paper.
5
Paper feed roller (Paper feed tray)
Feeds paper to the paper transport section
6
Paper pickup roller (Paper feed tray)
Feeds paper to the paper feed roller.
7
Separation roller (Paper feed tray)
Separates paper to prevent double feeding
8
Registration roller (Drive)
Transports paper to the transfer section / controls the transport timing of paper and adjusts relative relations
between the image and paper.
between the image and paper.
9
Registration roller (Idle)
Applies pressure to paper and the registration roller to provide the transport power of the transport roller to paper.
10
Transport roller 1 (Idle)
Applies pressure to paper and the transport roller to provide the transport power of the transport roller to paper.
11
Transport roller 1 (Drive)
Transports paper fed from the paper feed desk tray to the transport roller 4.
12
Transport roller 2 (Drive)
Transports paper fed from the paper feed tray to the transport roller 3.
13
Transport roller 2 (Idle)
Applies a pressure to paper and the transport roller to provide the transport power of the transport roller to paper.
14
Transport roller 3
Transports paper from the transport roller 2 to the transport roller 4.
15
Transport roller 4 (Idle)
Applies pressure to paper and the transport roller to give the transport power of the transport roller to the paper.
16
Transport roller 4 (Drive)
Transports paper from the transport roller 1 and 3 to the transport roller 5.
17
Transport roller 5 (Idle)
Applies a pressure to paper and the transport roller to provide the transport power of the transport roller to paper.
18
Transport roller 5 (Drive)
Transports paper to the registration roller. Paper is buckled between the registration roller and this roller to
correct the paper skew and set timing relation between images and paper.
correct the paper skew and set timing relation between images and paper.
19
Transport roller 6 (Idle)
Applies pressure to paper and the transport roller to give the transport power of the transport roller to the paper
20
Transport roller 6 (Drive)
Transports paper transported from the fusing section to the paper exit section and the switchback
section.
section.
21
Transport roller 7 (Idle)
Applies pressure to paper and the transport roller to provide the transport power of the transport roller to paper.
22
Transport roller 7 (Drive)
Transports paper transported from the switchback section to the transport roller 8.
23
Transport roller 8 (Idle)
Applies pressure to paper and the transport roller to provide the transport power of the transport roller to paper.
24
Transport roller 8 (Drive)
Transports paper transported from the transport roller 7 to the transport roller 9.
25
Transport roller 9 (Idle)
Applies pressure to paper and the transport roller to provide the transport power of the transport roller to paper.
26
Transport roller 9 (Drive)
Transports paper transported from the transport roller 8 to the transport roller 5.
27
Paper exit roller 3 (Drive)
Transports paper to paper exit roller 2 or transport roller 7.
28
Paper exit roller 3 (Idle)
Applies pressure to paper and the paper exit roller to provide the transport power of the paper exit roller to paper.
29
Paper exit roller 1 (Idle)
Applies pressure to paper and paper exit roller to provide the transport power of the paper exit roller to paper.
30
Paper exit roller 1 (Drive)
Transports paper to the left paper exit section.
31
Paper exit roller 2 (Idle)
Applies pressure to paper and the paper exit roller to provide the transport power of the paper exit roller to paper.
32
Paper exit roller 2 (Drive)
Discharges paper to the right paper exit tray.
33
Fusing roller (Heating)
Heat and press toner onto paper to fuse images.
34
Fusing roller (Pressing)
Applies pressure to the fusing roller.
30
29
27
28
32
31
29
27
28
32
31
22
21
20
19
21
20
19
34
33
23
24
1
4
8
9
7
11
10
14
12
13
12
13
16
15
3
2
5
6
26
25
18
17
MX-M565N ADJUSTMENTS AND SETTINGS 4 – 1
MX-M503N
Service Manual
[4] ADJUSTMENTS AND SETTINGS
1. General
Each adjustment item in the adjustment item list is associated with
a specific Job number. Perform the adjustment procedures in the
sequence of Job numbers from the smallest to the greatest.
a specific Job number. Perform the adjustment procedures in the
sequence of Job numbers from the smallest to the greatest.
However, there is no need to perform all the adjustment items. Per-
form only the necessary adjustments according to the need.
form only the necessary adjustments according to the need.
Unnecessary adjustments can be omitted. Even in this case, how-
ever, the sequence from the smallest to the greatest Job number
must be observed.
ever, the sequence from the smallest to the greatest Job number
must be observed.
If the above precaution should be neglected, the adjustment would
not complete normally or trouble may occur.
not complete normally or trouble may occur.
2. Adjustment item list
Job No
Adjustment item list
Simulation
ADJ 1
Adjust the developing unit
1A
Adjust the developing doctor gap
1B
Adjust the developing roller main pole position
1C
Toner density control reference value setting
25-2
ADJ 2
Adjusting high voltage values
2A
Adjust the main charger grid voltage
8-2
2B
Adjust the developing bias voltage
8-1
2C
Transfer current and voltage adjustment
8-6
2D
Transfer separation bias voltage adjustment
8-17
ADJ 3
Print engine image skew,
image position, image
magnification ratio, void area
adjustments
(Manual adjustments)
image position, image
magnification ratio, void area
adjustments
(Manual adjustments)
3A
Print engine image skew adjustment (LSU parallelism adjustment)
64-2
3B
Print engine image magnification ratio adjustment (Main scanning direction)
50-10
3C
Print engine print area (void area) adjustment
50-10/50-1
3D
Print engine image off-center adjustment
50-10
ADJ 4
Scan image distortion
adjustment (OC mode)
adjustment (OC mode)
4A
Scanner (reading) unit parallelism adjustment
4B
Scan image sub scanning direction distortion adjustment
4C
Scan image main scanning direction distortion adjustment
4D
Scan image distortion adjustment (Whole scanner unit)
ADJ 5
Scanner image skew
adjustment (DSPF/RSPF
mode)
adjustment (DSPF/RSPF
mode)
5A
DSPF/RSPF parallelism adjustment
5B
DSPF/RSPF skew adjustment (Front surface mode)
64-2
5C
DSPF skew adjustment (Back surface mode)
64-2
ADJ 6
Scan image focus adjustment
6A
Image focus adjustment (Document table mode/DSPF/RSPF front surface mode)
48-1
6B
Image focus adjustment (DSPF back surface mode)
ADJ 7
Scan image magnification
ratio adjustment (Manual
adjustment)
ratio adjustment (Manual
adjustment)
7A
Main scanning direction image magnification ratio adjustment (Document table mode)
48-1
7B
Sub scanning direction image magnification ratio adjustment (Document table mode)
48-1/48-5
7C
Main scanning direction image magnification ratio adjustment (DSPF/RSPF mode)
48-1
7D
Sub scanning direction image magnification ratio adjustment (DSPF/RSPF mode)
48-1
ADJ 8
Scan image off-center
adjustment (Manual
adjustment)
adjustment (Manual
adjustment)
8A
Scan image off-center adjustment (Document table mode)
50-12
8B
Scan image off-center adjustment (DSPF/RSPF mode)
50-12/50-6
ADJ 9
Print lead edge image position, void area adjustment (Printer mode)
50-5
ADJ 10
Copy image position, image
loss, and void area
adjustment
(Manual adjustment)
loss, and void area
adjustment
(Manual adjustment)
10A
Copy image position, image loss, void area adjustment (Document table mode)
50-1
10B
Document scan position adjustment (DSPF mode scanner scan position adjustment)
53-8
10C
Copy mode image loss adjustment (DSPF/RSPF mode)
50-6
ADJ 11
Gray balance/density
adjustment
adjustment
Note before execution of the image quality adjustment
Copy image quality check
Printer image quality check
11A
Scanner
calibration
(CCD
calibration)
calibration
(CCD
calibration)
11A
(1)
(1)
CCD gamma adjustment (CCD calibration) (Document table mode)
63-3 (63-5)
11A
(2)
(2)
Shading adjustment (Calibration) (DSPF mode)
63-2
11A
(3)
(3)
CCD gamma adjustment (CCD calibration) (DSPF mode)
63-3
11B
Copy/Printer gray balance and density adjustment (Automatic adjustment) (Basic adjustmen)
46-74
11C
Copy quality
adjustment
(Basic
adjustment)
adjustment
(Basic
adjustment)
11C
(1)
(1)
Copy gray balance and density adjustment (Automatic adjust-
ment)
ment)
46-24
11C
(2)
(2)
Copy gray balance and density adjustment (Manual adjustment)
46-21
11D
Copy/Image
send/FAX
image quality
adjustment
(Individual
adjustment)
send/FAX
image quality
adjustment
(Individual
adjustment)
11D
(1)
(1)
Monochrome copy density adjustment (for each monochrome copy
mode) (separately for the low density area and high density area) )
(No need to adjust normally)
mode) (separately for the low density area and high density area) )
(No need to adjust normally)
46-2
11D
(2)
(2)
Copy gray balance, gamma adjustment
(No need to adjust normally)
(No need to adjust normally)
46-10
11D
(3)
(3)
Monochrome copy density, gamma adjustment (for each monochrome
copy mode)
copy mode)
46-16
11D
(4)
(4)
Automatic monochrome (Copy/Scan/FAX) mode document density
scanning operation (exposure operation) conditions setting
(Normally no need to set)
scanning operation (exposure operation) conditions setting
(Normally no need to set)
46-19
MX-M565N ADJUSTMENTS AND SETTINGS 4 – 2
ADJ 11
Gray balance/density
adjustment
adjustment
11D
Copy/Image
send/FAX
image quality
adjustment
(Individual
adjustment)
send/FAX
image quality
adjustment
(Individual
adjustment)
11D
(5)
(5)
Document low density image density reproduction adjustment in the
automatic monochrome (Copy/Scan/FAX) mode (No need to adjust
normally) (Background density adjustment in the scanning section)
automatic monochrome (Copy/Scan/FAX) mode (No need to adjust
normally) (Background density adjustment in the scanning section)
46-32
11D
(6)
(6)
Copy/Scan low density image density adjustment )for each mode)
(No need to adjust normally)
(No need to adjust normally)
46-63
11D
(7)
(7)
Monochrome (Copy/Scan/FAX) mode color document reproduction
adjustment (No need to adjust normally)
adjustment (No need to adjust normally)
46-37
11D
(8)
(8)
Monochrome copy/color scan mode sharpness adjustment
(No need to adjust normally)
(No need to adjust normally)
46-30
11D
(9)
(9)
Copy high density image density reproduction setting
(Normally unnecessary the setting change)
(Normally unnecessary the setting change)
46-23
11D
(10)
(10)
DSPF mode (Copy/Scan/FAX) density adjustment
(No need to adjust normally)
(No need to adjust normally)
46-9
11D
(11)
(11)
Automatic gray balance adjustment by the user (Copy gray balance
automatic adjustment ENABLE setting and adjustment)
automatic adjustment ENABLE setting and adjustment)
26-53
11D
(12)
(12)
Copy gamma, gray balance adjustment for each dither (Automatic
adjustment)
adjustment)
46-54
11D
(13)
(13)
Dropout color adjustment (Normally not required)
46-55
11D
(14)
(14)
Watermark adjustment (Normally not required)
46-66
11E
Printer image
quality
adjustment
(Basic
adjustment)
quality
adjustment
(Basic
adjustment)
11E
(1)
(1)
Printer gray balance adjustment (Automatic adjustment)
67-24
11E
(2)
(2)
Printer gray balance adjustment (Manual adjustment)
67-25
11F
Printer image
quality
adjustment
(Individual
adjustment)
quality
adjustment
(Individual
adjustment)
11F
(1)
(1)
Printer density adjustment (Low density section density adjustment)
(No need to adjust normally)
(No need to adjust normally)
67-36
11F
(2)
(2)
Printer high density image density reproduction setting (Supporting the
high density section tone gap) (No need to adjust normally)
high density section tone gap) (No need to adjust normally)
67-34
11F
(3)
(3)
Printer gamma adjustment for each dither (Automatic adjustment) (No
need to adjust normally)
need to adjust normally)
67-54
11F
(4)
(4)
Automatic gray balance adjustment by the user (Printer gray balance
automatic adjustment ENABLE) setting and adjustment) (Normally
unnecessary to the setting change)
automatic adjustment ENABLE) setting and adjustment) (Normally
unnecessary to the setting change)
26-53
ADJ 12
Image send, FAX send
mode, image quality
adjustment
mode, image quality
adjustment
12A
Color image send mode, image density and gradation adjustment (by each mode)
46-4
12B
Monochrome image send mode, image density and gradation adjustment (by each mode)
46-5
12C
Image send mode, image color balance adjustment
46-8
12D
FAX send mode, image sharpness adjustment
46-39
ADJ
13
13
FAX send mode image
quality adjustment
quality adjustment
13A
Image density and gradation adjustment in the FAX send mode (Collective adjustment of all the
FAX mode)
FAX mode)
46-40
13B
Image density and gradation adjustment in the FAX send mode (Normal mode)
46-41
13C
Image density and gradation adjustment in the FAX send mode (Fine mode)
46-42
13D
Image density and gradation adjustment in the FAX send mode (Super fine mode)
46-43
13E
Image density and gradation adjustment in the FAX send mode (Ultra fine mode)
46-44
13F
Image density and gradation adjustment in the in the iFAX send mode (600dpi mode)
46-45
ADJ 14
Setting of the auto exposure mode operating conditions in copy, scan and FAX
46-19
ADJ 15
Paper size detection
adjustment
adjustment
15A
Manual paper feed tray paper width sensor adjustment
40-2
15B
DSPF/RSPF paper feed tray paper width sensor adjustment
53-6
ADJ 16
Document size detection
adjustment (Document table
mode)
adjustment (Document table
mode)
16A
Document size sensor detection point adjustment
41-1
16B
Adjust the sensitivity of the original size sensor
41-2
ADJ 17
Touch panel coordinate setting
65-1
ADJ 18
Image lead edge position,
image off-center, image
magnification ratio
adjustment
(Automatic adjustment)
image off-center, image
magnification ratio
adjustment
(Automatic adjustment)
18A
Print image main scanning direction image magnification ratio automatic adjustment (Document
table mode)
table mode)
50-28
18B
Image off-center automatic adjustment (Each paper feed tray)
50-28
18C
Copy lead edge image reference position adjustment, image off-center, sub scanning direction
image magnification ratio automatic adjustment (Document table mode)
image magnification ratio automatic adjustment (Document table mode)
50-28
18D
Copy image off-center, image lead edge position, sub scanning direction image magnification
ratio automatic adjustment (DSPF/RSPF mode)
ratio automatic adjustment (DSPF/RSPF mode)
50-28
ADJ 19
Fusing paper guide position adjustment
Job No
Adjustment item list
Simulation
Click on the first or last page to see other MX-M364N / MX-565N (serv.man4) service manuals if exist.