DOWNLOAD Sharp MX-M364N / MX-565N (serv.man4) Service Manual ↓ Size: 88.65 MB | Pages: 127 in PDF or view online for FREE

MX-M565N  EXTERNAL VIEW AND INTERNAL STRUCTURE  3 – 4

1

Touch panel

Messages and keys appear in the touch panel display. Touch the displayed keys to perform a variety of 
operations. The [HOME], [JOB STATUS] and [SYSTEM SETTINGS] keys are also available here. When a key is 
touched, a beep sounds and the selected item is highlighted. This provides confirmation as you perform an 
operation.

2

[HOME] key

Touch this key to display the home screen. Frequently used settings can be registered in the home screen to 
enable quick and easy operation of the machine.

3

[JOB STATUS] key

Touch this key to display the job status screen. The job status screen is used to check information on jobs and to 
cancel jobs.

4

PRINT mode indicators

* READY indicator

Print jobs can be received when this indicator is lit.

* DATA indicator

This blinks while print data is being received and lights steadily while printing is taking place.

5

Numeric keys

These are used to enter the number of copies, fax numbers, and other numerical values. These keys are also 
used to enter numeric value settings (except for the system settings).

6

[CLEAR] key 

Press this key to return the number of copies to "0".

7

[SYSTEM SETTINGS] key

Touch this key to display the system settings menu screen. The system settings are used to configure paper tray 
settings, store addresses for transmission operations, and adjust parameters to make the machine easier to use.

8

IMAGE SEND mode indicators

* LINE indicator

This lights up during transmission or reception of a fax or Internet fax. This also lights during transmission of an 
image in scan mode.

* DATA indicator

This blinks when a received fax or Internet fax cannot be printed because of a problem such as out of paper. 
This lights up when there is a transmission job that has not been sent.

9

Stylus pen

This can be used to touch a key displayed on the touch panel.

10

[STOP] key

Press this key to copy job or scanning of  an original.

11

[START] key 

Press this key to copy or scan an original in monochrome. This key is also used to send a fax in fax mode.

12

Main power indicator

This lights up when the machine’s main power switch is in the on position.

13

[POWER] key

Use this key to turn the machine power on and off.

14

[LOGOUT] key

Press this key to log out after you have logged in and used the machine. When using the fax function, this key 
can also be pressed to send tone signals on a pulse dial.line

15

[#/P] key

When using the copy function, press this key to use a job program. When using the fax function, this key can be 
used when dialing.

16

[CLEAR ALL] key

Press this key to return to the initial operation state. Use this key when you wish to cancel all settings that have 
been selected and start operation from the initial state.

17

[POWER SAVE] key

Use this key to put the machine into auto power shut-off mode to save energy.

: ‘16/Jan

MX-M565N  EXTERNAL VIEW AND INTERNAL STRUCTURE  3 – 5

1

Pickup roller

Picks up a document and feeds it to the document feed roller.

2

Document feed roller

Performs the document feed operation of documents.

3

Separation roller

Separates document pages to prevent against a double-feed.

4

No. 1 registration roller (Drive)

Controls paper transport timing and creates buckle to eliminate possible paper skew.

5

No. 1 registration roller (Idle)

Applies pressure to document page and the registration roller, and provides transport power of the registration roller to 
document.

6

Transport roller 1 (Drive)

Transports document from No. 1 registration roller to No. 2 registration roller.

7

Transport roller 1 (Idle)

Applied pressure to document and the transport roller, and provides the transport power of the transport roller to 
document.

8

No. 2 registration roller (Drive)

Synchronizes timing between the lead edge of a document and the scan start position.

9

No. 2 registration roller (Idle)

Applies pressure to document and the registration roller, and provides transport power of the registration roller to 
document.

10

Transport roller 2 (Drive)

Transports document from the No. 1 scan section to the transport roller 3.

11

Transport roller 2 (Idle)

Applies pressure to document and the transport roller and provides transport power of the transport roller to document.

12

Transport roller 3 (Drive)

Transports document from the transport roller 2 to the document exit roller.

13

Transport roller 3 (Idle)

Applies pressure to document and the transport roller and provides transport power of the transport roller to document.

14

Document exit roller (Drive)

Discharges document.

15

Document exit roller (Idle)

Applies pressure to document and the document exit roller and provides transport power of the document exit roller to 
document.

SCOV

DSPF upper door open/close detector

Transmission type

Detects open/close of the upper door.

SLCOV

DSPF lower door open/close detector

Micro switch

Detects open/close of the lower door.

SOCD

DSPF open/close detector

Transmission type

Detects open/close of the DSPF unit.

SPED1

DSPF document upper limit detector

Transmission type

Detects the upper limit of the DSPF document.

SPED2

DSPF document empty detector

Transmission type

Detects document empty in the document feed tray.

SPLS1

DSPF document length detection short detector

Transmission type

Detects the document length of the document feed tray upper.

SPLS2

DSPF document length detection long detector

Transmission type

Detects the document length of the document feed tray upper.

SPOD

DSPF document exit detector

Transmission type

Detects document exit of the document.

SPPD1

DSPF document pass detector 1

Transmission type

Detects pass of the document.

SPPD2

DSPF document pass detector 2

Transmission type

Detects pass of the document.

SPPD3

DSPF document pass detector 3

Transmission type

Detects pass of the document.

SPPD4

DSPF document pass detector 4

Transmission type

Detects pass of the document.

SPPD5

DSPF document pass detector 5

Transmission type

Detects pass of the document.

SPRDMD

DSPF document random detector

Transmission type

Detects the document size in random document feed.

SPWS

DSPF document width detector

Volume resistor

Detects the document width of the document feed tray upper.

STLD

DSPF document feed tray lower limit detector

Transmission type

Detects the lower limit of the document feed tray.

STUD

DSPF document feed tray upper limit detector

Transmission type

Detects the upper limit of the document feed tray.

SPPD2

SPPD1

SCOV

SPRDMD

STUD

SPPD3

SPPD4

SOCD

SLCOV

SPPD5

SPOD

SPED2

STLD

SPED1

SPWS

SPLS1

SPLS2

MX-M565N  EXTERNAL VIEW AND INTERNAL STRUCTURE  3 – 6

DSPF 
COPY LAMP

DSPF copy lamp

LED lamp

Radiates light onto a document to allow the CCD to scan document 
images.

SLUM

DSPF lift-up motor

PM step motor

Lifts up or moves down the document feed tray.

SPFC

DSPF document feed clutch

Electromagnetic clutch

Controls ON/OFF of the rollers in the document feed section.

SPFFAN

DSPF cooling fan motor

DC brush-less motor

Cools the motors and the clutches.

SPFM

DSPF transport motor

Hybrid step motor

Drives the transport roller.

SPOM

DSPF document exit motor

PM step motor

Drives the document exit roller.

SPUM

DSPF document feed motor

Hybrid step motor

Drives the rollers and transport rollers in the document feed section.

SRRC

DSPF No.2 registration roller clutch

Electromagnetic clutch

Controls ON/OFF of No. 2 registration roller.

STRC

DSPF transport roller clutch

Electromagnetic clutch

Controls ON/OFF of the transport roller 1.

STRRC

DSPF No.1 registration roller clutch

Electromagnetic clutch

Controls ON/OFF of No. 1 registration roller.

1

DSPF control PWB

Control PWB for DSPF

2

DSPF driver PWB

Driver PWB for DSPF

3

DSPF CCD PWB

Scans document images.

SPUM

SPOM

SLUM

SPFC

STRRC

STRC

SRRC

DSPF COPY LAMP

SPF FAN

SPFM

MX-M565N  EXTERNAL VIEW AND INTERNAL STRUCTURE  3 – 7

1

Pickup roller

Picks up a document and feeds it to the paper feed roller.

2

Paper feed roller

Performs the paper feed operation of documents.

3

Separation roller

Separates document page to prevent against a double-feed.

4

Resist roller (Drive)

Controls paper transport timing and creates buckle to eliminate possible paper skew.

5

Resist roller (Idle)

Applied pressure to document and the resist roller, and provides transport power of the resist roller to document.

6

Transport roller 1 (Drive)

Transports document from resist roller to transport roller 2.

7

Transport roller 1 (Idle)

Applied pressure to document and the transport roller, and provides the transport power of the transport roller to document.

8

Transport roller 2 (Drive)

Transports document to the transport 3 roller.

9

Transport roller 2 (Idle)

Applied pressure to document and the transport roller, and provides the transport power of the transport roller to document.

10

Transport roller 3 (Drive)

Transports document from the transport roller 2 to the paper exit roller. / Transports document to the resist roller when 
reversing the document.

11

Transport roller 3 (Idle)

Applied pressure to document and the transport roller, and provides the transport power of the transport roller to document.

12

Transport auxiliary roller

Helps to transport document smoothly.

SCOV

RSPF upper cover open/close sensor

Micro switch

Detects open/close of the RSPF upper cover.

SOCD

RSPF open/close sensor

Transmission type

Detects open/close of the RSPF unit.

SPED

RSPF document sensor

Transmission type

Detects document empty in the RSPF paper feed tray.

SPLS1

RSPF document length sensor (short)

Transmission type

Detects the document length in the RSPF paper feed tray.

SPLS2

RSPF document length sensor (long)

Transmission type

Detects the document length in the RSPF paper feed tray.

SPPD1

RSPF document pass sensor 1

Transmission type

Detects pass of the document.

SPPD2

RSPF document pass sensor 2

Transmission type

Detects pass of the document.

SPPD3

RSPF document pass sensor 3

Transmission type

Detects pass of the document.

SPPD4

RSPF document pass sensor 5

Transmission type

Detects pass of the document.

1

3

2

12

4

5

7 6

8 9

11

10

SPLS2

SPLS1

SPPD1

SPED

SPPD2

SPPD3

SPPD4

SOCD

SCOV