DOWNLOAD Sharp MX-M266N / MX-M316N / MX-M356N (serv.man5) Service Manual ↓ Size: 26.04 MB | Pages: 74 in PDF or view online for FREE

  MX-CS12/CS13(500-SHEET PAPER TRAY)  4 – 5

Lower the machine from straight above the optional paper feed
unit not to damage the gears on the optional paper feed unit. 

4)

Pull out the tray of MX-CS13.

5)

Attach the main unit with MX-CS12 and MX-CS13 with the
plates (Packed item Plate) and the screws (Packed items
M4x12P).

6)

When the MX-CS13 is fixed to the MX-CS12, connect the har-
ness from the MX-CS13 to the MX-CS12.

7)

Close the rear cabinet of each paper tray, and fix it with the
screw (M4x12P).

8)

Set up the size of the paper tray, and attach the side indication
label.

9)

Insert each tray back to its position.

<Front right>

<Front left>

<Rear right>

<Rear left>

M4 x 12P

M4 x 12P

M4 x 12P

M4 x 12P

M4 x 12P

M4 x 12P

M4 x 12P

M4 x 12P

MX-CS13

MX-CS12

: ‘15/Aug.

  MX-CS12/CS13(500-SHEET PAPER TRAY)  4 – 6

1)

Pull out the tray of MX-CS13.

2)

Remove the rear cabinet of MX-CS13.

3)

Place the main unit and MX-CS12/CS13 with caring the posi-
tions of the boss parts of MX-CS12.

Lower the machine from straight above the optional paper feed
unit not to damage the gears on the optional paper feed unit 

: ‘15/Aug.

  MX-CS12/CS13(500-SHEET PAPER TRAY)  4 – 7

4)

Pull out the tray of MX-CS12.

5)

Attach the main unit with MX-CS13 and MX-CS12 with the
plates (Packed item Plate) and the screws (Packed items
M4x12P).

6)

When the MX-CS12 is fixed to the MX-CS13, connect the har-
ness from the MX-CS12 to the MX-CS13. At this moment,
pass the harness to the wire saddles and roll the harness up
three times. 

7)

Close the rear cabinet of each paper tray, and fix it with the
screw (M4x12P).

8)

Set up the size of the paper tray, and attach the side indication
label.

9)

Insert each tray back to its position.

1)

Power to the main unit.

2)

Turn ON the power switch.

<Front right>

<Front left>

<Rear right>

<Rear left>

M4 x 12P

M4 x 12P

M4 x 12P

M4 x 12P

M4 x 12P

M4 x 12P

M4 x 12P

M4 x 12P

MX-CS12

MX-CS13

: ‘15/Aug.

MX-M316N  AR-DS19/DS20 (LOW STAND/HIGH STAND)  5 – 1

MX-M316N

Service Manual

 

Unpack the package, and check to confirm that all the parts are
provided.

1)

Remove the tray of the MX-CS12/CS13. 

2)

<AR-DS19>
Put the MX-CS12 or the main unit with the MX-CS12 on the
Stand. Fit the positioning pins of the Stand (2 places) with the
positioning holes of the MX-CS12. 

<AR-DS20> 
Put the MX-CS12 or MX-CS13 on the Stand. Fit the positioning
pins of the Stand (2 places) with the positioning holes of the
MX-CS12 or MX-CS13. At this moment, do not make con-
tacted the main unit with the fixing plate of the Stand.  * The
main unit needs to be connected with the MX-CS12 or MX-
CS13 when the MX-CS12 or MX-CS13 is fixed to the Stand.

1

2

3

Fixing plate Rear

2

4

Fixing screw A (S-tight M4×10)

2

5

Fixing screw B (P-tight M4×10)

4

<AR-DS20>

<AR-DS19>

1

2 

3

4

5

Positioning pin

Positioning pin

Do not contact.

Fixing plate

Fixing plate

Positioning pin

Positioning pin

Fixing plate

Do not contact.

Main unit

Fixing 
plate

Stand

Positioning pin

: ‘16/Dec.