DOWNLOAD Sharp MX-M200D / MX-M200DK (serv.man7) Service Manual ↓ Size: 4.82 MB | Pages: 100 in PDF or view online for FREE

Wave length

785 nm + 10 nm/- 15 nm

Pulse times

(8.141 µs ± 0.1 µs)/7 mm

Output power

0.14 mW - 0.22 mW

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous 
radiation exposure.

This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 1.2-2001)

This Digital Equipment is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This means 
that the equipment does not produce hazardous laser radiation. For your safety, observe the precautions below.

• Do not remove the cabinet, operation panel or any other covers.
• The equipment's exterior covers contain several safety interlock switches. Do not bypass any safety interlock by inserting 

wedges or other items into switch slots.

LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPARAT

Pegasus-E_Copy_Ex.book  7 ページ  ２００９年７月２２日　水曜日　午後２時４分

Improper installation may damage this product. Please note the following during initial installation and whenever the 
machine is moved.

1. The machine should be installed near an accessible power outlet for easy connection.
2. Be sure to connect the power cord only to a power outlet that meets the specified voltage and current 

requirements. Also make certain the outlet is properly grounded.

• For the power supply requirements, see the name plate on the back of the main unit.

3. Do not install your machine in areas that are:

• damp, humid, or very dusty 
• exposed to direct sunlight 
• poorly ventilated 
• subject to extreme temperature or humidity changes, e.g., near 

an air conditioner or heater.

4. Be sure to allow the required space around the machine for 

servicing and proper ventilation.

* The products without the logo may not meet the International Energy Star Program guideline.

Connect the machine to a power outlet which is not used for other electric appliances. If a lighting fixture is 
connected to the same outlet, the light may flicker.

A small amount of ozone is created inside the machine during printing. The amount of ozone created is not sufficient to be 
harmful; however, an unpleasant odor may be noticed during large copy runs, and thus the machine should be installed in a 
room with a ventilation fan or windows that provide sufficient air circulation. (The odor may occasionally cause headaches.)
* Install the machine so that people are not directly exposed to exhaust from the machine. If installed near a window, ensure 

that the machine is not exposed to direct sunlight.

Products that have earned the ENERGY STAR

®

 are designed to protect the environment through 

superior energy efficiency.

20 cm (8")

20 cm

(8")

20 cm

(8")

Chapter00.fm  8 ページ  ２００９年７月２２日　水曜日　午後２時３７分

Multiple manuals are provided for use of the machine. Please read each manual as appropriate for the functions that 
you wish to use.

The first half of this manual contains general information on the machine, including safety precautions and the 
procedures for loading paper, removing misfeeds, and performing regular maintenance.
The second half of the manual contains explanations of how to use the copy function of the machine.
The manual also includes explanations of system settings for management of the machine and for the copy function. 
Explanations of system settings related to the fax, printer, and network scanner functions can be found in the 
respective manuals for those functions.
The system settings are used by the administrator of the machine to enable or disable functions to suit the needs of 
your workplace.

This explains how to install and configure the printer driver.

This explains how to use the fax function of the machine. To use the fax function, the optional facsimile expansion kit 
(AR-FX11) must be installed.

This explains how to use the machine as a printer and a scanner when it is connected to a computer.

This explains how to use the machine as a network printer.
To use the machine as a network printer, the optional network expansion kit (MX-NB10) must be installed.

This explains how to use the machine as a network scanner when it is connected to a computer. To use the machine 
as a network scanner, the optional network expansion kit must be installed.

*1 The "Operation manual (for facsimile)" is contained in the optional facsimile expansion kit.
*2 The "Operation manual (for printer and scanner)" is contained in the accompanying CD-ROM in PDF format. The "Operation 

manual (for network printer)" and the "Operation manual (for network scanner)" are contained in PDF format in the CD-ROM 
that accompanies the network expansion kit. (These manuals are not provided in printed form.)

An "R" appearing at the end of an original or paper size (A4R, B5R (8-1/2" x 
11"R, 5-1/2" x 8-1/2"R), etc.) indicates that the original or paper is oriented 
horizontally as shown below.
Sizes that can be placed only in the horizontal (landscape) orientation (A3, 
B4 (11" x 17", 8-1/2" x 14")) do not contain the "R" in their size indication.

This manual refers to the Reversing single pass feeder as the "RSPF" and the single pass feeder as the "SPF". 
Unless specific mention is made, both the RSPF and the SPF are referred to simply as "SPF".

Warns the user that injury may result if the contents of the warning are not properly followed.

Cautions the user that damage to the machine or one of its components may result if the contents 
of the caution are not properly followed.

Notes provide information relevant to the machine regarding specifications, functions, 
performance, operation and such, that may be useful to the user.

Horizontal (Landscape) orientation

Pegasus-E_Copy_Ex.book  9 ページ  ２００９年７月２２日　水曜日　午後２時４分

• First-copy time*

1

 at 600 x 300 dpi*

2

 is only 7.2 seconds.

• Copying speed is 20 (MX-M200D) or 16 (MX-M160/M160D) copies per minute. This provides a big boost to 

workplace productivity.

*1 Measured after the machine has warmed up following power-on, copying using the document glass (A4 (8-1/2" x 11") paper 

fed from machine tray 1). The first-copy time may vary depending on machine operating conditions and ambient conditions 
such as temperature and power voltage.

*2 "dpi" ("dots per inch") is a unit that is used to measure resolution. Resolution indicates how much detail can be reproduced in 

a printed or scanned image.

• High-quality copying at 600 dpi is performed.
• In addition to automatic exposure adjustment, two exposure modes can be selected: "TEXT" for text-only originals, 

and "PHOTO" for photographs. The exposure can be adjusted to five levels in each mode.

• Photo mode allows clear copying of originals with delicate halftones such as monochrome photos and colour photos.

• The zoom function can be used to reduce or enlarge copies from 25% to 400% in increments of 1%. (When the 

SPF is used, the zoom copy ratio range is 50% to 200%.)

• Up to 999 copies can be made of an original scanned just once. (This can be changed to a maximum of 99 copies 

in the system settings.)

• The system settings allow functions to be selected and managed to meet your specific needs. For example, 

access to the machine can be controlled by enabling audit mode.

Copies of multiple original pages can sorted into sets.

• The machine is equipped standard with a USB interface, enabling it to be used as a printer and a scanner.
• To use the machine as a printer or scanner, the printer driver or scanner driver must first be installed as explained 

in the "Software setup guide".

A

A

A

A

CARD

CARD

CARD

Erase copy

Margin shift

2 in 1 copy

4 in 1 copy

Dual page copy

Rotation copy

XY zoom copying

Back

Card shot

Front

2

1

3

2

1

3

1

2

3

2

1

3

Pegasus-E_Copy_Ex.book  10 ページ  ２００９年７月２２日　水曜日　午後２時４分