Sharp MX-M182 / MX-M182D (serv.man5) Service Manual ▷ View online
MX-M182 SIMULATIONS 7-53
66
04
Signal send mode
Used to send signals to the line and the machine speaker by setting the signal number. (Signal send is
continued until interruption is instructed by pressing RETURN key.) The signal send level is selected from
0db and the soft SW values. Since the level setting is not required for 1:NO SIGNAL and 31:PSEUDO RNG
- 33:R.B.TONE NONE, the selection menu does not appear. The signal send level is returned to the soft SW
set value before execution of the mode when completing the mode.
Used to send signals to the line and the machine speaker by setting the signal number. (Signal send is
continued until interruption is instructed by pressing RETURN key.) The signal send level is selected from
0db and the soft SW values. Since the level setting is not required for 1:NO SIGNAL and 31:PSEUDO RNG
- 33:R.B.TONE NONE, the selection menu does not appear. The signal send level is returned to the soft SW
set value before execution of the mode when completing the mode.
06
Confidential pass code print
Used to print the confidential ID table (confidential box number, confidential box name, confidential pass
code).
Used to print the confidential ID table (confidential box number, confidential box name, confidential pass
code).
07
Image memory content print
Used to print all the image data (confidential receive contents, remote send images, and images which are
not sent yet) in the image memory of the FAX section. The printed images are remained in the memory after
printing.
Used to print all the image data (confidential receive contents, remote send images, and images which are
not sent yet) in the image memory of the FAX section. The printed images are remained in the memory after
printing.
Main
code
code
Sub
code
Contents
Remark
Sim66-4 SIGNAL OUT
Sim66-4 SIGNAL OUT
Sim66-4 SIGNAL OUT
Sim66-4 SIGNAL OUT
Sim66-4 SIGNAL OUT
SIGNAL SELECT
(1 - 35)
1:NO SIGNAL
2:33600bps(V34)
3:31200bps(V34)
(1 - 35)
2:33600bps(V34)
3:31200bps(V34)
(1 - 35)
XX
After selection with numeric keys
[OK] key
[OK] key
[OK] key
[BACK] key
33600bps(V34)
1:MAX
2:SOFT SW.
(1 - 2)
1:MAX
2:SOFT SW.
(1 - 2)
X
33600bps(V34)
0dB
0dB
EXEC
33600bps(V34)
PRESS BACK TO STOP
PRESS BACK TO STOP
EXEC
Sim66-4 SIGNAL OUT
34:DP MAKE
35:DP BREAK
35:DP BREAK
(1 - 35)
XX
After pressing
[OK] key
[OK] key
SIM66-4 initial window
[CA] key
: Simulation cancel
[INTERRUPT] key : Sub code input window
[C] key
[C] key
: Input clear
key
: Page select
Numeric keys
: Number input and item selection
[OK] key
: Input value settlement and execution
[START] key
: Input value settlement
[BACK] key
: Signal send stop
The window is switched with the up and down keys.
Input and switching the window are irrelevant.
Not highlighted with an input of a value.
The window is not switched, either.
Input and switching the window are irrelevant.
Not highlighted with an input of a value.
The window is not switched, either.
When "1: NO SIGNAL" or "31: PSEUDO RNG" - "33: R.B. TONE NONE"
is selected, "0dB" and "SOFT SW" are not selected.
When one of these is selected, the second line is the signal name,
the third and fourth lines are empty, and the fifth line is EXEC display.
is selected, "0dB" and "SOFT SW" are not selected.
When one of these is selected, the second line is the signal name,
the third and fourth lines are empty, and the fifth line is EXEC display.
1sec later
PRINT CONF.
EXEC
PRINT CONF.
EXEC
Sim66-6 PASS
CODE
Sim66-6 PASS
CODE
Sim66-6 PASS
CODE
PRINT STORED
Sim66-6 PASS
CODE
NO DATA
3sec later
In case of an error
[OK] key
Sim66-7 PRINT MEMORY
Sim66-7 PRINT MEMORY
Sim66-7 PRINT MEMORY
PRINT STORED
PRINT IMAGE MEMORY
EXEC
NO DATA
Sim66-7 PRINT MEMORY
CAN NOT PRINT
(When there is no image memory)
[OK] key
[OK] key
[OK] key
1sec later
3sec later
3sec later
[CA] key
: Simulation cancel
[INTERRUPT] key : Sub code input
window
[OK] key
: Settlement
[START] key
: Settlement
[C] key
: Disable
[BACK] key
: Disable
MX-M182 SIMULATIONS 7-54
66
10
Image memory contents clear
Used to clear all the image data (including confidential receive contents) in the image memory of the FAX
section. The management table is also cleared (initialized) at the same time.
section. The management table is also cleared (initialized) at the same time.
11
300bps signal send
Used to send the specified signal at the speed of 300bps by setting the signal number. (Signal send is
continued until interruption is instructed by pressing RETURN key.) The signal send level is selected from
0db and soft switch set values. The signal send level is returned to the sot SW set value before execution of
the mode after completion of the mode.
continued until interruption is instructed by pressing RETURN key.) The signal send level is selected from
0db and soft switch set values. The signal send level is returned to the sot SW set value before execution of
the mode after completion of the mode.
Main
code
code
Sub
code
Contents
Remark
Sim66-10 IMAGE CLR
[OK] key
Sim66-10 IMAGE CLR
Sim66-10 IMAGE CLR
CLEAR IMAGE MEMORY
ARE YOU SURE? EXEC
CLEAR IMAGE MEM.
EXEC
CLEARED IMAGE MEM.
DO POWER OFF
DO POWER OFF
Sim66-10 IMAGE CLR
CLEARED
Power source OFF/ON
Simulation code input window
Completion
of execution
(Highlighted
during execution)
of execution
(Highlighted
during execution)
Completion of execution
(Highlighted during execution)
(Highlighted during execution)
After pressing
[OK] key,
during execution
[OK] key,
during execution
With prints
Without prints
[CA] key
: Simulation cancel
[INTERRUPT] key : Sub code input
window
[OK] key
: Settlement
[BACK] key
: Simulation code input window
[START] key
: Settlement
[C] key
: Disable
[BACK] key
Sim66-11 300bps SIG.
Sim66-11 300bps SIG.
[OK] key
Sim66-11 300bps SIG.
Sim66-11 300bps SIG.
SIGNAL LEVEL
1:MAX
2:SOFT SW.
( 1 - 2 )
1:MAX
2:SOFT SW.
( 1 - 2 )
X
1:NO SIG. 4:00000
2:11111 5:010101
3:11110 6:00001
( 1 - 6 )
2:11111 5:010101
3:11110 6:00001
( 1 - 6 )
X
NO SIGNAL
EXEC
SIM66-11 initial window
OUTPUTING SIGNAL
PRESS BACK TO STOP
PRESS BACK TO STOP
EXEC
After selection with numeric keys
[OK] key
[OK] key
After selection
with numeric keys
with numeric keys
After pressing [OK] key,
during execution
during execution
[BACK] key
[CA] key
: Simulation cancel
[INTERRUPT] key : Sub code input window
[C] key
[C] key
: Input clear
keys
: Page switch
Numeric keys
: Item selection
[OK] key
: Input value settlement and execution
[START] key
: Input value settlement
[BACK] key
: Signal send stop
MX-M182 SIMULATIONS 7-55
66
13
Dial number registration
Used to perform send test and adjustments of the dial pulse and the DTMF signal.
Perform send test of the dial pulse and the DTMF signal, and perform adjustments of the make time of the
dial pulse and adjustments of the send level of the DTMF signal.
Perform send test of the dial pulse and the DTMF signal, and perform adjustments of the make time of the
dial pulse and adjustments of the send level of the DTMF signal.
17
DTMF signal send
Used to send the DTMF signal.
Main
code
code
Sub
code
Contents
Remark
[OK] key
[OK] key
[OK] key
[OK] key
[OK] key
[OK] key
[OK] key
[OK] key
SIM66-13 initial window
[INTERRUPT] key : Sub code input window
[C] key
[C] key
: Input clear
Numeric key
: Input of time and dial number
and selection of an item
[OK] key
: Settlement and execution of an input
[START] key
: Settlement of an input
[BACK] key
: Returns to the selection window
XXXXXXXX :
Input
dial
After selection
with numeric key
with numeric key
After selection
with numeric key
with numeric key
After selection
with numeric key
with numeric key
The default is set to "1590."
Dial input (0 - 9, *, #)
When the value is great, scroll to the left.
When [C] is pressed, all are cleared.
Dial input (0 - 9, *, #)
When the value is great, scroll to the left.
When [C] is pressed, all are cleared.
After pressing [OK] key, during execution
[OK] key
After pressing [OK] key,
during execution
during execution
Sim66-13 DIAL TEST
After selection
with numeric key
with numeric key
1.NormalMode
2.HandsetMode
2.HandsetMode
( 1-2 )
X
When "2" is
selected
selected
[OK] key
Select with numeric keys and press [OK] key.
Sim66-13 DIAL TEST
DTMF HIGH:XX LOW:YY
INPUT DIAL #
XXXXXXXXXXXXX
INPUT DIAL #
XXXXXXXXXXXXX
EXEC
When "1" is
selected
selected
SIM66-13 initial window
When the soft SW and the SIM DTMF
sound speaker are selected, "Normal"
and "handset" are selected. In another
case, this menu is not displayed.
sound speaker are selected, "Normal"
and "handset" are selected. In another
case, this menu is not displayed.
Set the signal send level to 0
or to the soft SW setting
value.
(High group of DTMF signal
send level)
*1 (Low group of DTMF
or to the soft SW setting
value.
(High group of DTMF signal
send level)
*1 (Low group of DTMF
signal send level)
Sim66-13 DIAL TEST
1:PULSE 10pps
2:PULSE 20pps
3:DTMF
( 1-3 )
2:PULSE 20pps
3:DTMF
( 1-3 )
X
Sim66-13 DIAL TEST
PULSE 10pps
INPUT MAKE TIME
YY
( 26-41 )
INPUT MAKE TIME
YY
( 26-41 )
YY
Sim66-13 DIAL TEST
SELECT HIGH LEVEL
1:DEFAULT
2:SOFT SW.
1:DEFAULT
2:SOFT SW.
Y
( 1-2 )
X
Sim66-13 DIAL TEST
Sim66-13 DIAL TEST
INPUT LOW LEVEL
DTMF SOFT SW.
DTMF SOFT SW.
Y
( 0-15 )
XX
Select with numeric keys
and press [OK] key.
and press [OK] key.
DTMF HIGH:XX LOW:YY
INPUT DIAL #
XXXXXXXXXXXXX
EXEC
INPUT DIAL #
XXXXXXXXXXXXX
EXEC
Completion of execution
(Highlighted during execution)
(Highlighted during execution)
Completion of execution
(Highlighted during execution)
(Highlighted during execution)
SENDING 10 pps YYms
INPUT DIAL #
XXXXXXXXXXXX
INPUT DIAL #
XXXXXXXXXXXX
EXEC
Sim66-13 DIAL TEST
Sim66-13 DIAL TEST
SEND 10 pps
YYms
INPUT DIAL #
XXXXXXXXXXXXX
EXEC
XXXXXXXXXXXXX
EXEC
Sim66-13 DIAL TEST
PULSE 10pps
YYms
INPUT DIAL #
XXXXXXXXXXXXX
EXEC
XXXXXXXXXXXXX
EXEC
The default is set to "1590."
Dial input (0 - 9, *, #)
When the value is great,
scroll to the left.
When [C] is pressed, all are
cleared.
Dial input (0 - 9, *, #)
When the value is great,
scroll to the left.
When [C] is pressed, all are
cleared.
[OK] key
Sim66-17 DTMF SIG.
Sim66-17 DTMF SIG.
Sim66-17 DTMF SIG.
1:MAX
2:SOFT SW.
2:SOFT SW.
( 1-2 )
X
INPUT DIAL #
X
X
EXEC
SIM66-17 initial window
[CA] key
: Simulation cancel
[INTERRUPT] key : Sub code input window
[C] key
[C] key
: Input clear and stop
Numeric keys
: Item selection, dial
number
input
[OK] key
: Input value settlement
and
execution
[START] key
: Input value settlement
and
execution
[BACK] key
: Signal send stop
After selection
with numeric key
with numeric key
SENDING SIGNAL
X
PRESS BACK TO STOP
X
PRESS BACK TO STOP
EXEC
Completion of execution
(Highlighted during execution)
(Highlighted during execution)
Set the signal send level to
MAX or to the soft setting
value.
MAX or to the soft setting
value.
Select the dial
number to be sent.
(1 dial)
number to be sent.
(1 dial)
The DTMF signal
of the selected
dial number is
sent until the
interruption
command is
delivered by
pressing the stop
key.
of the selected
dial number is
sent until the
interruption
command is
delivered by
pressing the stop
key.
[OK] key
[BACK] key
After pressing [OK] key,
during execution
during execution
MX-M182 SIMULATIONS 7-56
66
21
FAX information print
Used to print the following FAX information.
24
FAST SRAM clear
Used to clear the FAST SRAM data.
30
TEL/LIU status change check
Used to display the change contents regardless of the soft SW setting when the status of the polarity
inversion relay, the handset hook switch, or the external telephone hook switch is changed. The display of
the changed status is remained until the interruption command is made by pressing RETURN key.
inversion relay, the handset hook switch, or the external telephone hook switch is changed. The display of
the changed status is remained until the interruption command is made by pressing RETURN key.
Main
code
code
Sub
code
Contents
Remark
Sim66-21 LIST
Sim66-21 LIST
Sim66-21 LIST
1:USER SW. LIST
2:SOFT SW. LIST
3:SYSTEM ERROR
(1 - 5)
2:SOFT SW. LIST
3:SYSTEM ERROR
(1 - 5)
X
SOFT SW. LIST
EXEC
PRINT STORED
Sim66-21 LIST
4:PROTOCOL MONITOR
5:FAX SIMULATION
5:FAX SIMULATION
(1 - 5)
X
[OK] key
[OK] key
[OK] key
Sim66-21 LIST
CAN NOT PRINT
Printer Error
After selection with numeric keys
After selection
with numeric
keys
with numeric
keys
After pressing
[OK] key,
during
execution
[OK] key,
during
execution
1sec later
SIM66-21 window
1sec later
SIM66-21 window
[CA] key
: Simulation cancel
[INTERRUPT] key : Sub code input window
Numeric key
Numeric key
: Item selection
[OK] key
: Settlement and execution
[START] key
: Input value settlement and execution
[BACK] key
: Returns to the selection window.
keys
: Page switch
[C] key
: Disable
Sim66-24 FAST CLEAR
Sim66-24 FAST CLEAR
[OK] key
Sim66-24 FAST CLEAR
INITIAL
EXEC
INITIALIZED
Sim66-24 FAST CLEAR
Not Supported
FAST Correspond
FAST NO Correspond
INITIAL
EXEC
[CA] key
: Simulation cancel
[INTERRUPT] key : Sub code input window
[OK] key
[OK] key
: Settlement
[START] key
: Settlement
[C] key
: Disable
[BACK] key
: Disable
After pressing
[OK] key,
during
execution
[OK] key,
during
execution
Completion of
execution
(Highlighted during
execution)
execution
(Highlighted during
execution)
1sec later
Simulation code input window
Sim66-30 TEL STAT.
Sim66-30 TEL STAT.
[OK] key
[BACK] key
SIM66-30
initial window
initial window
EXEC
HS2 :XXX HS1 :XXX
RHS :XXX EXHS :XXX
PRESS BACK TO STOP
RHS :XXX EXHS :XXX
PRESS BACK TO STOP
EXEC
XXX: ON or OFF
[CA] key
: Simulation cancel
[INTERRUPT] key : Sub code input window
[OK] key
[OK] key
: Settlement
[BACK] key
: Returns to the selection
window
[START] key
: Settlement
[C] key
: Disable
After pressing
[OK] key,
during
execution
[OK] key,
during
execution
Click on the first or last page to see other MX-M182 / MX-M182D (serv.man5) service manuals if exist.