Sharp MX-M160 / MX-M160D / MX-M160DK (serv.man7) User Manual / Operation Manual ▷ View online
31
TROUBLESHOOTING AND MAINTENANCE
2
MISFEED IN THE MACHINE
To remove a paper misfeed from the machine, the bypass tray and then the side cover must be opened. Check
whether the misfeed occurred in A, B, or C below and then follow the misfeed removal procedure for that location.
whether the misfeed occurred in A, B, or C below and then follow the misfeed removal procedure for that location.
1
Open the bypass tray and then the
side cover.
side cover.
2
Determine where the misfeed
occurred.
occurred.
Misfeed in A
1
Open the front cover.
Push gently on both ends of the
front cover to open it.
front cover to open it.
2
Turn the roller rotating knob in the
direction of the arrow to remove the
misfed paper.
direction of the arrow to remove the
misfed paper.
Be careful not to tear the misfed
paper during removal.
paper during removal.
3
Close the front cover and the side
cover.
cover.
The message "
Clear paper
path." will be cleared and
copying will be possible.
copying will be possible.
Location B
If paper is misfed here, go to
"Misfeed in B" (page 32).
If paper is misfed here, go to
"Misfeed in B" (page 32).
Location C
If paper is misfed here, go to "Misfeed in C"
(page 33).
If paper is misfed here, go to "Misfeed in C"
(page 33).
Location A
If paper is misfed here, go to "Misfeed in A"
(below).
If paper is misfed here, go to "Misfeed in A"
(below).
The fusing unit is hot. Do not touch
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
Do not touch the photoconductive drum
(green portion) when removing the misfed
paper. Doing so may damage the drum and
cause smudges on copies.
(green portion) when removing the misfed
paper. Doing so may damage the drum and
cause smudges on copies.
Roller rotating
knob
knob
Warning
Caution
• When closing the front cover, gently hold
both ends.
• When closing the side cover, hold the
handle.
• If the message does not clear, check
again to make sure that no pieces of
paper remain.
paper remain.
Note
Pegasus-E_Copy_Ex.book 31 ページ 2009年7月22日 水曜日 午後2時4分
32
TROUBLESHOOTING AND MAINTENANCE
Misfeed in B
1
Open the front cover.
Push gently on both ends of the
front cover.
front cover.
2
Turn the roller rotating knob in the
direction of the arrow.
direction of the arrow.
3
Lower the right and left fusing unit
release levers and remove the misfed
paper.
release levers and remove the misfed
paper.
Be careful not to tear the misfed
paper during removal.
paper during removal.
4
Lift the fusing unit release levers.
5
Close the front cover and the side
cover.
cover.
The message "
Clear paper
path." will be cleared and
copying will be possible.
copying will be possible.
The fusing unit is hot. Do not touch
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
• Do not touch the photoconductive drum
(green portion) when removing the misfed
paper. Doing so may damage the drum
and cause smudges on copies.
paper. Doing so may damage the drum
and cause smudges on copies.
• Take care not to allow unfixed toner on the
misfed paper to soil your hands or clothes.
Roller
rotating knob
rotating knob
Fusing unit release levers
Warning
Caution
• When closing the front cover, gently hold
both ends.
• When closing the side cover, hold the
handle.
• If the message does not clear, check
again to make sure that no pieces of
paper remain.
paper remain.
Note
Pegasus-E_Copy_Ex.book 32 ページ 2009年7月22日 水曜日 午後2時4分
33
TROUBLESHOOTING AND MAINTENANCE
2
Misfeed in C
1
Lower (1) in the illustration, open the
fusing unit paper guide, and remove
the misfed paper.
fusing unit paper guide, and remove
the misfed paper.
Be careful not to tear the misfed
paper during removal.
paper during removal.
2
If the misfed paper cannot be removed
by the previous step, remove it from
the paper output area.
by the previous step, remove it from
the paper output area.
Be careful not to tear the misfed
paper during removal.
paper during removal.
3
Close the side cover.
The message "
Clear paper
path." will be cleared and
copying will be possible.
copying will be possible.
MISFEED IN TRAY 1
1
Pull out tray 1 and remove the misfed
paper.
paper.
Be careful not to tear the misfed
paper during removal.
paper during removal.
2
Open and close the side cover.
The message "
Clear paper
path." will be cleared and
copying will be possible.
copying will be possible.
3
Gently push tray 1 into the machine.
Push the tray in completely.
The fusing unit is hot. Do not touch
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
(1)
Warning
• When closing the side cover, hold the
handle.
• If the paper was torn, make sure that no
torn pieces remain in the machine.
• If the message does not clear, check
again to make sure that no pieces of
paper remain.
paper remain.
Note
Make sure that there is no misfed paper in the tray before pulling it out. (Page 31)
Note
• When closing the side cover, hold the
handle.
• If the message does not clear, check
again to make sure that no pieces of
paper remain.
paper remain.
Note
Pegasus-E_Copy_Ex.book 33 ページ 2009年7月22日 水曜日 午後2時4分
34
TROUBLESHOOTING AND MAINTENANCE
MISFEED IN TRAY 2
1
Open the side cover.
Grasp the handle to open the
side cover.
side cover.
2
Remove the misfed paper.
Be careful not to tear the misfed
paper during removal.
paper during removal.
3
If there was no misfed paper in step 2,
pull out tray 2 and remove the misfed
paper.
pull out tray 2 and remove the misfed
paper.
Be careful not to tear the misfed
paper during removal.
paper during removal.
4
Gently close the side cover.
The message "
Clear paper
path." will be cleared and
copying will be possible.
copying will be possible.
5
Gently push tray 2 into the machine.
Push the tray in completely.
• Make sure that there is no misfed paper in the tray before pulling it out. (Page 31)
• Also use the following procedure to remove misfeeds that occur in the 250-sheet paper feed unit and the 2 x
• Also use the following procedure to remove misfeeds that occur in the 250-sheet paper feed unit and the 2 x
250-sheet paper feed unit.
Note
If the message does not clear, check again
to make sure that no pieces of paper
remain.
to make sure that no pieces of paper
remain.
Side cover
Note
Side cover
2 x 250-sheet paper feed unit (AR-D35)
Pegasus-E_Copy_Ex.book 34 ページ 2009年7月22日 水曜日 午後2時4分
Click on the first or last page to see other MX-M160 / MX-M160D / MX-M160DK (serv.man7) service manuals if exist.