DOWNLOAD Sharp MX-C310 / MX-C311 / MX-C312 / MX-C380 / MX-C381 / MX-C400 / MX-C401 (serv.man80) Service Manual ↓ Size: 33.89 KB | Pages: 5 in PDF or view online for FREE

Model
MX-C310 MX-C311 MX-C312 MX-C380 MX-C381 MX-C400 MX-C401 (serv.man80)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
33.89 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / CCE 748 -PRODUCTION ROM CHANGE VERSION D01 MX-C311 381 DX-C311 401 ONLY (MISC OSA PRINTER SCANNING COPY BUGS RESOLVED,L4-31 H4-04 CORRECTED-BULLETIN EMBEDDED)
File
mx-c310-mx-c311-mx-c312-mx-c380-mx-c381-mx-c400-mx.pdf
Date

Sharp MX-C310 / MX-C311 / MX-C312 / MX-C380 / MX-C381 / MX-C400 / MX-C401 (serv.man80) Service Manual / Technical Bulletin ▷ View online

 
                                                                                                                                         
CCE 748 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
 
 
No. Subject 
Description 
Japanese/Frenc
Production 
ROM Control 
No. 
American 
Production 
ROM Control 
No. 
20 Option 
related 
On the built-in keyboard model, if a keyboard 
type card reader is connected to the read USB 
port and low-power mode is entered and then 
recovered from, the Keyboard type card reader 
will not be recognized. This glitch has been 
corrected. 
D01 D00 
21 Other 
When the network connection speed is slow, 
the remote operation panel will become 
abnormally slow. The following has been 
performed to improve this functionality. 
1) The compression option for VNC protocol 
has been enabled. 
2) When the next data transmission request is 
sent while a request is being processed, all 
but the final is destroyed and the drawing 
data is thinned. 
D01 D00 
22 Other 
Of counter information displayed in the MFP 
main body, items that do not exist in MIB 
information have been added to MIB 
information. 
D01 D00 
23 
Error code related 
During preheating, by opening the right door 
of the MFP unit or the cover of the finisher 
(MX-FN12), an “L4-31” error would occur. This 
glitch has been corrected. 
D01 D01 
24 
Error code related 
While the MFP unit is in ready standby mode 
and the lower heat roller is turned off, in some 
rare cases an “H4-04” error would occur. This 
glitch has been corrected. 
D01 D01 
 
 
                                                                                                                                         
CCE 748 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
 
 
No. Subject 
Description 
Japanese/Frenc
Production 
ROM Control 
No. 
American 
Production 
ROM Control 
No. 
20 Option 
related 
On the built-in keyboard model, if a keyboard 
type card reader is connected to the read USB 
port and low-power mode is entered and then 
recovered from, the Keyboard type card reader 
will not be recognized. This glitch has been 
corrected. 
D01 D00 
21 Other 
When the network connection speed is slow, 
the remote operation panel will become 
abnormally slow. The following has been 
performed to improve this functionality. 
1) The compression option for VNC protocol 
has been enabled. 
2) When the next data transmission request is 
sent while a request is being processed, all 
but the final is destroyed and the drawing 
data is thinned. 
D01 D00 
22 Other 
Of counter information displayed in the MFP 
main body, items that do not exist in MIB 
information have been added to MIB 
information. 
D01 D00 
23 
Error code related 
During preheating, by opening the right door 
of the MFP unit or the cover of the finisher 
(MX-FN12), an “L4-31” error would occur. This 
glitch has been corrected. 
D01 D01 
24 
Error code related 
While the MFP unit is in ready standby mode 
and the lower heat roller is turned off, in some 
rare cases an “H4-04” error would occur. This 
glitch has been corrected. 
D01 D01 
 
 
                                                                                                                                         
CCE 748 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
 
 
No. Subject 
Description 
Japanese/Frenc
Production 
ROM Control 
No. 
American 
Production 
ROM Control 
No. 
20 Option 
related 
On the built-in keyboard model, if a keyboard 
type card reader is connected to the read USB 
port and low-power mode is entered and then 
recovered from, the Keyboard type card reader 
will not be recognized. This glitch has been 
corrected. 
D01 D00 
21 Other 
When the network connection speed is slow, 
the remote operation panel will become 
abnormally slow. The following has been 
performed to improve this functionality. 
1) The compression option for VNC protocol 
has been enabled. 
2) When the next data transmission request is 
sent while a request is being processed, all 
but the final is destroyed and the drawing 
data is thinned. 
D01 D00 
22 Other 
Of counter information displayed in the MFP 
main body, items that do not exist in MIB 
information have been added to MIB 
information. 
D01 D00 
23 
Error code related 
During preheating, by opening the right door 
of the MFP unit or the cover of the finisher 
(MX-FN12), an “L4-31” error would occur. This 
glitch has been corrected. 
D01 D01 
24 
Error code related 
While the MFP unit is in ready standby mode 
and the lower heat roller is turned off, in some 
rare cases an “H4-04” error would occur. This 
glitch has been corrected. 
D01 D01 
 
 
                                                                                                                                         
CCE 748 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
 
 
No. Subject 
Description 
Japanese/Frenc
Production 
ROM Control 
No. 
American 
Production 
ROM Control 
No. 
20 Option 
related 
On the built-in keyboard model, if a keyboard 
type card reader is connected to the read USB 
port and low-power mode is entered and then 
recovered from, the Keyboard type card reader 
will not be recognized. This glitch has been 
corrected. 
D01 D00 
21 Other 
When the network connection speed is slow, 
the remote operation panel will become 
abnormally slow. The following has been 
performed to improve this functionality. 
1) The compression option for VNC protocol 
has been enabled. 
2) When the next data transmission request is 
sent while a request is being processed, all 
but the final is destroyed and the drawing 
data is thinned. 
D01 D00 
22 Other 
Of counter information displayed in the MFP 
main body, items that do not exist in MIB 
information have been added to MIB 
information. 
D01 D00 
23 
Error code related 
During preheating, by opening the right door 
of the MFP unit or the cover of the finisher 
(MX-FN12), an “L4-31” error would occur. This 
glitch has been corrected. 
D01 D01 
24 
Error code related 
While the MFP unit is in ready standby mode 
and the lower heat roller is turned off, in some 
rare cases an “H4-04” error would occur. This 
glitch has been corrected. 
D01 D01 
 
Page of 5
Display

Sharp MX-C310 / MX-C311 / MX-C312 / MX-C380 / MX-C381 / MX-C400 / MX-C401 (serv.man80) Service Manual / Technical Bulletin ▷ Download