Sharp MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man13) User Manual / Operation Manual ▷ View online
35
MAC OS X
7
The License Agreement window will
appear. Make sure that you understand
the contents of the license agreement
and then click the [Continue] button.
appear. Make sure that you understand
the contents of the license agreement
and then click the [Continue] button.
A message will appear asking you if you agree to the
terms of the license. Click the [Agree] button.
terms of the license. Click the [Agree] button.
8
Click the [Install] button.
Installation begins.
9
When the installation completed screen
appears, click the [Close] button.
appears, click the [Close] button.
This completes the installation of the software. Next,
configure the printer driver settings.
configure the printer driver settings.
10
Click [System Preference] in the Apple
menu (
menu (
) and select [Print & Scan] (
).
• If you are using Mac OS X v10.5 to 10.6, click [System
Preferences] in the Apple menu (
) and select [Print
& Fax] (
).
• In Mac OS X v10.4, select [Utilities] from the [Go]
menu and double-click the [Printer Setup Utility](
)*.
When the screen for adding a printer appears, click
[Add] and then go to step 12.
* If this is the first time you are installing a printer driver
[Add] and then go to step 12.
* If this is the first time you are installing a printer driver
on your computer, a confirmation message will
appear. Click the [Add] button.
appear. Click the [Add] button.
11
Click the
button and select "XXXX".
In Mac OS X v10.5 to 10.7, when the screen for adding a
printer appears, click the
printer appears, click the
button.
• If the license appears in the different language,
change the language in the language menu.
• In Mac OS X v10.4 to 10.7, select the hard drive
and click the [Install] button. Be sure to select the
hard drive on which your operating system is
installed.
In Mac OS X v10.5 to 10.7, you click the [Change
Install Location] button if you change the hard drive
which the printer driver is installed.
hard drive on which your operating system is
installed.
In Mac OS X v10.5 to 10.7, you click the [Change
Install Location] button if you change the hard drive
which the printer driver is installed.
If the "Authenticate" window appears, enter the
password and click the [Install Software] button.
In Mac OS X v10.4 to 10.6, enter the password and
click the [OK] button.
password and click the [Install Software] button.
In Mac OS X v10.4 to 10.6, enter the password and
click the [OK] button.
36
MAC OS X
12
Configure the printer driver.
If you wish to use the IPP function, see "Printing using
the IPP function" (page 37) to configure the printer driver
settings.
the IPP function" (page 37) to configure the printer driver
settings.
(1) Click the [Default] icon.
If you are using Mac OS X v10.4, click the [Default
Browser] icon.
Browser] icon.
(2) Click the machine's model name.
• Using with AppleTalk:
The machine's model name usually appears as
[SCxxxxxx]*.
[SCxxxxxx]*.
• Using with Bonjour:
The machine's model name usually appears as
[xxxxxx]*.
[xxxxxx]*.
* "xxxxxx" is a sequence of characters that varies
depending on your model.
(3) Make sure that the PPD file of your
model is selected.
The PPD file of the machine is automatically selected.
(4) Click the [Add] button.
• Using with AppleTalk:
The PPD file of the machine is automatically
selected and the peripheral devices installed on
the machine are detected and automatically
configured.
selected and the peripheral devices installed on
the machine are detected and automatically
configured.
• Using with Bonjour:
The "Installable Options" screen appears. Select
the machine configuration and click the
[Continue] button.
the machine configuration and click the
[Continue] button.
13
Click the [Option & Supplies] button
and click the [Driver] tab.
and click the [Driver] tab.
In Mac OS X v10.4, click the machine's name and click
the [Show Info] icon.
the [Show Info] icon.
14
Select the machine configuration.
If you selected [Auto Select] in (3) of step 12, the
machine configuration is detected and automatically
configured. Check the configured settings to make sure
they are correct.
machine configuration is detected and automatically
configured. Check the configured settings to make sure
they are correct.
(1) Select the options that are installed on
the machine.
In Mac OS X v10.4, before you are selecting the
option, select [Installable Options].
option, select [Installable Options].
(2) Click the [OK] button.
If you are using Mac OS X v10.4, click the [Apply
Changes] button.
Changes] button.
(3) Click to close the window.
This completes the configuration of the printer
driver.
driver.
The PPD file is installed in the following folders on the
startup disk.
[Library] - [Printers] - [PPDs] - [Contents] -
[Resources] - [en.lproj]
startup disk.
[Library] - [Printers] - [PPDs] - [Contents] -
[Resources] - [en.lproj]
(2)
(1)
(4)
(3)
You can check the options that are installed on the
machine by printing out the "All Custom Setting List".
(However, note that "Input Tray Options" must be set
to the number of trays on the machine.) To print out
the "All Custom Setting List", see the Operation
Guide.
machine by printing out the "All Custom Setting List".
(However, note that "Input Tray Options" must be set
to the number of trays on the machine.) To print out
the "All Custom Setting List", see the Operation
Guide.
(1)
(2)
37
MAC OS X
X Printing using the IPP function
The machine can print using the IPP function. When the machine is in a remote location, this function can be used in
place of the fax function to print a higher quality image than a fax. If you wish to use the IPP function, follow these steps
to select the PPD file when configuring the printer driver (step 12 on page 36).
place of the fax function to print a higher quality image than a fax. If you wish to use the IPP function, follow these steps
to select the PPD file when configuring the printer driver (step 12 on page 36).
(1) Click the [IP] icon.
If you are using Mac OS X v10.4, click the [IP
Printer] icon.
Printer] icon.
(2) Select [Internet Printing Protocol] in
"Protocol". Enter the address of the
machine (IP address or domain name)
and the queue name.
machine (IP address or domain name)
and the queue name.
Enter "ipp" in "Queue".
(3) Select [Select a driver to use] (or
[Select Printer Software]) from "Print
Using" and click the PPD file for your
model.
Using" and click the PPD file for your
model.
If you are using Mac OS X v 10.5 to 10.7, select
[Sharp] in "Print Using" and click the PPD file of
your model.
[Sharp] in "Print Using" and click the PPD file of
your model.
(4) Click the [Add] button.
The screen for the machine configuration appears.
Make sure that the settings are correct and click the
[OK] button.
If you are using Mac OS X v10.5 to 10.6, click the
[Continue] button.
Make sure that the settings are correct and click the
[OK] button.
If you are using Mac OS X v10.5 to 10.6, click the
[Continue] button.
☞
Checking the IP address of the machine (page 7)
Depending on the models, this function may not be available.
(2)
(1)
(4)
(3)
38
WHEN INSTALLATION WAS NOT
SUCCESSFUL
SUCCESSFUL
This section provides solutions to possible installation problems. See the following table of contents to locate the
appropriate page for your question or problem.
appropriate page for your question or problem.
4
TROUBLESHOOTING
• The software cannot be installed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
• The machine is not detected (when connected to a network). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
• The plug and play screen does not appear (USB connection in Windows). . . . . . . . . . . . . . . . . . . . . . 39
• The printer driver is not installed correctly by plug and play (USB connection in Windows). . . . . . . . . 39
• The printer driver cannot be installed (Windows XP/Server 2003) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Problem
Point to check
Solution
The software cannot
be installed.
be installed.
Is there sufficient free space on your
hard drive?
hard drive?
Delete any unneeded files and applications to increase
free space on your hard drive.
free space on your hard drive.
Are you using an operating system that
is not supported?
is not supported?
Make sure that the software can run on your operating
system.
system.
The machine is not
detected (when
connected to a
network).
detected (when
connected to a
network).
Is the IP address of the machine
configured?
configured?
If the IP address of the machine is not configured, the
machine will not be detected. Make sure that the IP
address is configured correctly in "Network Settings" in
the machine's system settings (administrator).
machine will not be detected. Make sure that the IP
address is configured correctly in "Network Settings" in
the machine's system settings (administrator).
➞ System Settings (Administrator) > "Network Settings"
Is your computer connected to the same
network as the machine?
network as the machine?
Windows:
If the machine and your computer are not connected
to the same local area network, the machine will not
be detected. If the two are connected to different
sub-networks, click the [Specify condition] button and
enter the machine's name (host name) or IP address
to search for the machine.
to the same local area network, the machine will not
be detected. If the two are connected to different
sub-networks, click the [Specify condition] button and
enter the machine's name (host name) or IP address
to search for the machine.
Macintosh:
If multiple AppleTalk zones exist, select the zone to
which the machine is connected from the menu.
which the machine is connected from the menu.
Click on the first or last page to see other MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man13) service manuals if exist.