Sharp MX-6500N / MX-7500N (serv.man20) Service Manual ▷ View online
MX-7500N SIMULATION 6 – 49
*1: Default values for each destination of item A/B/D/I
*2: Item B: COLOR MODE set value
(OFF: Displayed/ON: Not displayed)
*3:
26-52
Purpose
Setting
Function (Purpose)
Used to set whether non-printed paper
(insertion paper, cover paper) is counted up
or not.
Section
Operation/Procedure
1) Enter the set value with 10-key.
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value in step 1) is saved.
26-53
Purpose
Setting
Function (Purpose)
User auto color calibration (color balance
adjustment) Inhibit/Allow setting.
Section
Operation/Procedure
1) Enter the set value with 10-key.
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value in step 1) is saved.
26-60
Purpose
Setting
Function (Purpose)
Used to set the utility counter mode.
Section
Operation/Procedure
1) Select an item to be set.
2) Press [EXECUTE] key.
3) Press [YES key.
1) Select an item to be set.
2) Press [EXECUTE] key.
3) Press [YES key.
J
BOOKLET MAKER
SETTING
0
Enable the setting of
BOOKLET MAKER
indication.
0
1
Disable the setting of BOOK-
LET MAKER indication.
Destination
Item A
Item B
Item D
Item I
U.S.A
1
0
2
0
CANADA
1
0
2
0
INCH
1
0
2
0
JAPAN
1
7
2
1
AB_B
1
0
2
1
EUROPE
1
0
2
1
U.K.
0
0
2
1
AUS.
1
0
2
1
AB_A
1
0
2
1
CHINA
1
0
2
1
Set value
Mode
2-Color/Single
Single
2-color
Counter
0
OFF
OFF
OFF
1
OFF
ON
OFF
2
ON
OFF
OFF
3
ON
ON
OFF
4
OFF
OFF
ON
5
OFF
ON
ON
6
ON
OFF
ON
7
ON
ON
ON
Target
paper
Target paper setting
0
1
Finishe
r
Postcard,
envelope
The operation is stopped when
30 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and 30 or less
sheets of a kind are
continuously discharged, the
operation is stopped by the
paper exit tray full detection.
If it is set to "1,"
the operation is
stopped when
the paper exit
tray is full or
when 500
sheets are
discharged.
Label
sheet,
tab sheet,
OHP
The operation is stopped when
100 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and 100 or less
sheets of a kind are
continuously discharged, the
operation is stopped by the
paper exit tray full detection.
Item/Display
Content
Default
value
0
Count up
1
No count up
Destination
Default
U.S.A
0 (Counted)
CANADA
0 (Counted)
INCH
0 (Counted)
JAPAN
1 (Not counted)
AB_B
0 (Counted)
EUROPE
0 (Counted)
U.K.
0 (Counted)
AUS.
1 (Not counted)
AB_A
0 (Counted)
CHINA
0 (Counted)
Item/Display
Content
Setting
range
Default
value
A COPY
(1:YES 0:NO)
Copy
mode
Allow
1
1
Inhibit
0
B PRINTER
(1:YES 0:NO)
Printer
mode
Allow
1
1
Inhibit
0
Item
Display
Content
Utility
Counter
Mode
NORMAL
Usual counter mode
TONER SAVE
Toner save counter mode
MCOVERAGE
Coverage counter mode
MX-7500N SIMULATION 6 – 50
26-61
Purpose
Setting
Function (Purpose)
Used to set the threshold of coverage coun-
ter.
Section
Operation/Procedure
1) Used to set the threshold of coverage counter
1) Used to set the threshold of coverage counter
Change the display with scroll key on the touch panel.
26-65
Purpose
Setting
Function (Purpose)
Used to set the finisher alarm mode.
Section
Operation/Procedure
Use the touch key to set.
Use the touch key to set.
26-69
Purpose
Setting
Function (Purpose)
Used to set the operating conditions for
toner near end.
Section
Operation/Procedure
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2 is saved.
Items
Display Data
Contents
Display range
Default Value
A
BW LEVEL1
The threshold of BK coverage count1(0.1% unit)
1 to 998
10
B
BW LEVEL2
The threshold of BK coverage count2(0.1% unit)
2 to 999
150
C
Color LEVEL1
The threshold of CL coverage count1(0.1% unit)
1 to 998
10
D
Color LEVEL2
The threshold of CL coverage count2(0.1% unit)
2 to 999
150
E
Coverage
Items
CMY
The calculation standard of the threshold
CMY
0 to 1
0 (CMY)
CMYK
CMYK
Item
Content
100 sheets staple finisher/100 sheets staple saddle finisher
Setting range
Default value
LIMIT COPIES
Number of sheets of stapling: Limited
ON or OFF
ON
Number of sets of stapling: Not Limited
Item/Display
Content
Setting
range
Default
value
A TONER
PREPARATION
(0:YES 1:NO)
0
The toner
preparation
message is
displayed.
0 - 1
List of
Default
values and
set values
for each
destination
1
The toner
preparation
message is not
displayed.
B REMAINING
TONER
LEVEL
5%
0
Toner
preparation at
remaining toner
level of 5%
0 - 9
4
10%
1
Toner
preparation at
remaining toner
level of 10%
15%
2
Toner
preparation at
remaining toner
level of 15%
20%
3
Toner
preparation at
remaining toner
level of 20%
25%
4
Toner
preparation at
remaining toner
level of 25%
30%
5
Toner
preparation at
remaining toner
level of 30%
35%
6
Toner
preparation at
remaining toner
level of 35%
B REMAINING
TONER
LEVEL
40%
7
Toner
preparation at
remaining toner
level of 40%
0 - 9
4
45%
8
Toner
preparation at
remaining toner
level of 45%
50%
9
Toner
preparation at
remaining toner
level of 50%
Item/Display
Content
Setting
range
Default
value
MX-7500N SIMULATION 6 – 51
<List of Default values and set values for each destination>
26-71
Purpose
Setting
Function (Purpose)
Used to set the trial mode of the web
browsing function.
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
1) Enter the set value with 10-key.
2) Press [OK] key.
26-73
Purpose
Setting
Function (Purpose)
Enlargement continuous shoot, A3 wide
copy mode image loss (shade delete quan-
tity) adjustment
Section
Operation/Procedure
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
When the adjustment value is increased, the image loss
(shade delete quantity) is increased.
26-74
Purpose
Setting
Function (Purpose)
Used to set the OSA trial mode.
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
1) Enter the set value with 10-key.
2) Press [OK] key.
26-78
Purpose
Setting
Function (Purpose)
Used to set the password of the remote
operation panel.
Section
Operation/Procedure
1) Enter a password with 10-key. (5 - 8 digits)
1) Enter a password with 10-key. (5 - 8 digits)
The entered password is displayed on the column of "NEW".
In order to correct the entered password, press the [clear] key
In order to correct the entered password, press the [clear] key
to delete the entered value one digit by one digit.
2) Press [SET] key.
C TONER NEAR
END(0:YES 1:NO)
0
The toner near
end message is
displayed.
0 - 1
List of
Default
values and
set values
for each
destination
1
The toner near
end message is
not displayed.
D TONER END
1
Operation 1
1 - 3
List of
Default
values and
set values
for each
destination
2
Operation 2
3
Operation 3
E TONER END
JUDGMENT
1
Remaining
toner counter
(accumulated
rotation time of
the toner
hopper)
1 - 3
1
2
Toner end
judgment by
ATC (Exhaust
use in the
intermediate
hopper)
3
Toner end
judgment by
bottle end
(Introduction
process, etc.)
F
TONER E-MAIL
ALERT
0
E-mail alert
Toner Low
status send
timing near near
toner end
0 - 1
1
1
E-mail alert
Toner Low
status send
timing near
toner end
Destination
Setting value
Toner
preparation
message
Toner near end
message
At toner end
U.S.A
0 (Displayed)
0 (Displayed)
2
CANADA
0 (Displayed)
0 (Displayed)
2
INCH
0 (Displayed)
0 (Displayed)
2
JAPAN
0 (Displayed)
0 (Displayed)
2
AB_B
0 (Displayed)
0 (Displayed)
2
EUROPE
0 (Displayed)
0 (Displayed)
2
U.K.
0 (Displayed)
0 (Displayed)
2
AUS.
0 (Displayed)
0 (Displayed)
2
AB_A
0 (Displayed)
0 (Displayed)
2
CHINA
0 (Displayed)
0 (Displayed)
1
Item/Display
Content
Setting
range
Default
value
Item/Display
Content
Setting
range
Default
value
A WEB
BROWSING
TRIAL MODE
(0: YES 1: NO)
0
Web browsing trial
mode setting
0 - 1
1
1
Web browsing trial
mode canceling
Item/Display
Content
Setting
range
Default value
A DELETING
SHADOW ADJ
(M)
Rear frame side
image loss quantity
(shade delete
quantity) adjustment
0 - 50
0
(Adjustment
amount:
0.1mm/step)
B DELETING
SHADOW ADJ
(S)
Lead edge image
loss quantity (shade
delete quantity)
adjustment
0 - 50
0
(Adjustment
amount:
0.1mm/step)
Item/Display
Content
Setting
range
Default
value
A OSA TRIAL MODE
(0: YES 1: NO)
0
Used to set the
OSA trial mode.
0 - 1
1
1
OSA trial mode is
canceled.
MX-7500N SIMULATION 6 – 52
26-79
Purpose
Setting
Function (Purpose)
Used to set YES/NO of the pop-up display
of user data delete result.
Section
Operation/Procedure
1) Enter the set value with 10-key.
1) Enter the set value with 10-key.
The value for the display operation specification after comple-
tion of user data delete is set.
2) Press [OK] key.
27
27-1
Purpose
Setting
Function (Purpose)
Used to set non-detection of communica-
tion error (U7-00) with RIC. (FSS function)
Operation/Procedure
1) Enter the set value with 10-key.
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value in step 1) is saved.
27-2
Purpose
Setting
Function (Purpose)
Used to set the sender's registration num-
ber and the HOST server telephone num-
ber. (FSS function)
Section
Operation/Procedure
1) Select an item to be set with touch panel.
1) Select an item to be set with touch panel.
[USER FAX NO] [SERVA TEL NO]
2) Enter the set value with 10-key.
3) Press [SET] key.
3) Press [SET] key.
The set value in step 2) is saved.
27-4
Purpose
Setting
Function (Purpose)
Used to set the initial call and toner order
auto send. (FSS function)
Section
Operation/Procedure
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2) is saved.
Item/Display
Content
Setting range
Default
value
A DISP SET
User data delete result
pop-up display ON
YES
1
0 (NO)
User data delete result
pop-up display OFF
NO
0
0
Not detection
1
Detection
USER FAX_NO.
Sender registration number (Max. 16 digits)
SERVA TEL_NO.
Host server telephone number (Max. 16 digits)
- If the connection process is not completed
normally when registering the FSS, calling to the
HOST may be continuously made every time when
the power is turned ON (from OFF) or rebooted.
In this case, enter "********" to inhibit calling to the
HOST.
Item/Display
Content
Setting
range
Default
value
Remarks
A
FSS MODE
NEB1
Set the FSS MODE
Exclusive for send in NE-B mode
0 - 3
0
1
NEB2
Send/Receive in NE-B mode
1
NFB1
Exclusive for send in NE-F mode
2
For convenience stores
NFB2
Send/Receive in NE-F mode
3
For convenience stores
B
RETRY_BUSY
Resend number setting when busy
0 - 15
2
0: No retry
C
TIMER(MINUTE)_BUSY
Resend timer setting (minute) when busy
1 - 15
3
D
RETRY_ERROR
Resend number setting when error
0 - 15
1
0: No retry
E
TIMER(MINUTE)_ERROR
Resend timer setting (minute) when error
1 - 15
1
F
FAX RETRY
Resend number setting when FAX initial connection
0 - 15
2
Unit: Number of times
G
TONER ORDER
TIMING(K)
EMPTY
Toner order auto send
timing setting (K)
Empty
0 - 11
0
11
NEAR_END
Near end
1
5%
5%
2
10%
10%
3
15%
15%
4
20%
20%
5
25%
25%
6
30%
30%
7
35%
35%
8
40%
40%
9
45%
45%
10
50%
50%
11
Click on the first or last page to see other MX-6500N / MX-7500N (serv.man20) service manuals if exist.