Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man7) Handy Guide ▷ View online
Firmware Upgrade
25
Document Solutions After Sales Service
6. Firmware update progress (and remaining time) should now be displayed:-
7. Once the firmware update has completed successfully, click OK (MFP should reboot).
Firmware update is complete.
Firmware Upgrade
26
Document Solutions After Sales Service
Network (Web Page)
1.
Open a web browser and enter the following URL :-
http://ipaddress/service_login.html or
http://ipaddress/service_account.html
http://ipaddress/service_account.html
Example:
http://192.168.0.1/service_login.html
2.
To access the Service Webpage, enter the “Service” Username and Password.
Click Login:-
Default Username:
service
Password:
service
Note: If User Authentication is enabled, open the device webpage and login by selecting “Service”
from the drop down menu and entering the service password:-
3.
When the service webpage opens, click Update of Firmware.
4.
Click Browse to navigate to the location of the updated firmware file and select
Open.
5.
Press Execute to start the firmware update.
Firmware Upgrade
27
Document Solutions After Sales Service
Note: Once the machine has entered “service download mode”, the update will
Commence and the progress be displayed
6.
When the firmware upgrade is complete, click Reboot to execute a remote restart
Of the machine
Firmware Upgrade is Complete
Firmware Recovery Procedure
28
Document Solutions After Sales Service
The following five keys are used for executing functions when in the CN Update mode
1.
Insert the USB memory containing the firmware into the USB port
2.
Turn on the power
3.
Check to confirm the machine starts booting (It takes more than
10 seconds to display the menu)
In the event of a power failure during a firmware update or HDD failure, the machine may fail to reboot because of
corrupted firmware. In this case the SD card containing the correct BOOT program will have to be replaced,
firmware will then have to be recovered using the CN method.
corrupted firmware. In this case the SD card containing the correct BOOT program will have to be replaced,
firmware will then have to be recovered using the CN method.
Firmware Recovery Procedure:
To enter the CN firmware recovery method, turn ON the UPDATE DIP-SW on the MFP PWB
OK key
MENU key
BACK key
UP key
DOWN key
Display when Booting is complete
Click on the first or last page to see other MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man7) service manuals if exist.