Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man15) User Manual / Operation Manual ▷ View online
32
10
Press the [COLOUR START] key (
)
or the [BLACK & WHITE START] key
(
(
).
Scanning begins.
• If the originals were placed in the document feeder tray, the
originals are copied.
• If you placed the original on the document glass, scan each
page one page at a time. If you are using the sort function or
other function that requires all originals to be scanned before
the copies are printed, you must use the same [START] key
that you used to scan the first original to scan each of the
remaining originals.
other function that requires all originals to be scanned before
the copies are printed, you must use the same [START] key
that you used to scan the first original to scan each of the
remaining originals.
To cancel scanning of the original and copying...
Press the [STOP] key (
Press the [STOP] key (
).
When the automatic document feeder is used, the vertical and horizontal ratio selection ranges are both 25% to 200%.
To cancel an XY zoom setting...
To cancel an XY Zoom setting, touch the [XY Zoom] key or the [Cancel] key.
To cancel an XY Zoom setting, touch the [XY Zoom] key or the [Cancel] key.
or
33
ORIGINAL SIZES
CHECKING THE ORIGINAL SIZE
When the original is placed, the original size is automatically detected and displayed in the base screen. If [Auto]
appears in the [Original] key that is displayed when the [Job Detail Settings] key is touched, the size of the placed
original is automatically detected. (Automatic original detection function)
appears in the [Original] key that is displayed when the [Job Detail Settings] key is touched, the size of the placed
original is automatically detected. (Automatic original detection function)
Example of base screen
The original size is displayed. An icon shows the
orientation of the original.
If the original size is not a standard size, it will not be
automatically detected. In this case, specify the original size.
orientation of the original.
If the original size is not a standard size, it will not be
automatically detected. In this case, specify the original size.
Example of the [Original] key display
(A) The original size is displayed.
(B) "Auto" appears when the automatic original detection function is operating.
(B) "Auto" appears when the automatic original detection function is operating.
List of original size detector settings
The standard sizes are set in "Original Size Detector Setting" in the system settings (administrator). The factory default
setting is "AB-1 (Inch-1)".
setting is "AB-1 (Inch-1)".
Ready to scan for copy.
2-Sided Copy
0
Output
Special Modes
File
Quick File
Full Colour
Colour Mode
Auto
Exposure
100%
Copy Ratio
Original A4
2.
3.
4.
1.
A4R
B4
A3
A3
A4
Job Detail
Settings
A4
Plain
(A)
2-Sided Copy
Output
Special Modes
File
Quick File
Full Colour
Colour Mode
Auto
Exposure
100%
Copy Ratio
Job Detail
Settings
Plain
A4
Auto
Original
Auto A4
Paper Select
Special Modes
(B)
Selections
Detectable original sizes
Document glass
Document feeder tray (automatic document feeder)
AB-1
A3, A4, A4R, A5, B4, B5, B5R
A3, A4, A4R, A5, B4, B5, B5R, 8-1/2" x 11",
8-1/2" x 14", 11" x 17"
8-1/2" x 14", 11" x 17"
AB-2
A3, A4, A4R, A5, B5, B5R, 216 mm x 330 mm
(8-1/2" x 13")
(8-1/2" x 13")
A3, A4, A4R, A5, B4, B5, B5R, 8-1/2" x 11",
11" x 17", 216 mm x 330 mm (8-1/2" x 13")
11" x 17", 216 mm x 330 mm (8-1/2" x 13")
AB-3
A4, A4R, A5, B4, 8K, 16K, 16KR
A3, A4, A4R, A5, B4, 8K, 16K, 16KR, 8-1/2" x 11",
11" x 17", 216 mm x 330 mm (8-1/2" x 13")
11" x 17", 216 mm x 330 mm (8-1/2" x 13")
Inch-1
11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R,
5-1/2" x 8-1/2"
5-1/2" x 8-1/2"
11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R,
5-1/2" x 8-1/2", A4, A3
5-1/2" x 8-1/2", A4, A3
Inch-2
11" x 17", 8-1/2" x 13" (216 mm x 330 mm),
8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"
8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"
11" x 17", 8-1/2" x 13" (216 mm x 330 mm),
8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A4, A3
8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A4, A3
• When the automatic original detection function is operating and the original is a non-standard size (an inch size or special
size), the closest standard size may be displayed or the original size may not appear. In this event, manually set the
correct original size.
correct original size.
☞
SPECIFYING THE ORIGINAL SIZE
(page 35)
• When placing a non-standard size original on the document glass, you can make it easier for the size to be detected by
placing a blank sheet of A4, B5 (8-1/2" x 11", 5-1/2" x 8-1/2"), or other standard size of paper on top of the original.
34
Standard original placement orientations
Place originals in the document feeder tray or on the document glass so that the top and bottom of the original are
oriented as shown below. If originals are placed in the wrong orientation, staples will be incorrectly positioned and some
special features may not give the expected result. For more information on placing the original, see "3. ORIGINAL" in
the User's Guide.
[Example 1]
oriented as shown below. If originals are placed in the wrong orientation, staples will be incorrectly positioned and some
special features may not give the expected result. For more information on placing the original, see "3. ORIGINAL" in
the User's Guide.
[Example 1]
[Example 2]
Automatic copy image rotation (Rotation Copy)
If the orientation of the original and paper are different, the original image will be automatically rotated 90º to match the
paper. (When an image is rotated, a message will be displayed.)
[Example]
paper. (When an image is rotated, a message will be displayed.)
[Example]
This function operates in either auto paper selection mode or auto image mode. Rotation can be disabled using
"Rotation Copy Setting" in the system settings (administrator).
"Rotation Copy Setting" in the system settings (administrator).
abc
abc
Place the original
with the corners
aligned here.
with the corners
aligned here.
Document glass
Document feeder tray
abc
abc
Place the original
with the corners
aligned here.
with the corners
aligned here.
Document glass
Document feeder tray
The image is rotated 90 degrees
Orientation of placed original
Orientation of paper
The original seen
from behind
from behind
The paper seen
from behind
from behind
35
SPECIFYING THE ORIGINAL SIZE
When the original size is a non-standard size or is not detected correctly, manually specify the original size.
1
Touch the [Job Detail Settings] key.
2
Touch the [Original] key.
3
Specify the original size.
● Specifying an AB original size
(1) Touch the appropriate original size key.
(2) Touch the [OK] key.
● Specifying an inch original size
(1) Touch the [AB
Inch] key.
(2) Touch the appropriate original size key.
(3) Touch the [OK] key.
Ready to scan for copy.
2-Sided Copy
Original
0
Output
Special Modes
File
Quick File
Full Colour
Colour Mode
Auto
Exposure
100%
Copy Ratio
A4
2.
3.
4.
1.
A4R
B4
A3
A3
A4
Job Detail
Settings
A4
Plain
2-Sided Copy
Output
Special Modes
File
Quick File
Full Colour
Colour Mode
Auto
Exposure
100%
Copy Ratio
Plain
A4
Auto
Original
Special Modes
Auto A4
Paper Select
Job Detail
Settings
Original
Manual
Custom
Size
Auto
OK
OK
Standard Size
Size Input
A5
B5R
B4
A5R
A4
B5
A4R
A3
AB
Inch
(1)
(2)
Original
Manual
Custom
Size
Auto
OK
OK
Standard Size
Size Input
5 x8
11x17
AB
Inch
1
/
2
1
/
2
5 x8 R
1
/
2
1
/
2
8 x11
1
/
2
8 x11R
1
/
2
8 x13(216x330)
1
/
2
8 x14
1
/
2
(2)
(1)
(3)
Click on the first or last page to see other MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man15) service manuals if exist.