Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man15) User Manual / Operation Manual ▷ View online
28
3
Touch the [Menu] key to select copy
ratio menu "
ratio menu "
" or "
".
● Menu
• Enlarge keys:
115%, 122% and 141% (for the AB system).
121% and 129% (for the inch system).
121% and 129% (for the inch system).
• Reduction keys:
70%, 81% and 86% (for the AB system).
77% and 64% (for the inch system).
77% and 64% (for the inch system).
• Full size key: 100%
● Menu
• Enlargement keys (2 to 4 ratios)
200%, 400%, any ratio (max. of two)
• Reduction keys (2 to 4 ratios)
25%, 50%, any ratio (max. of two)
• Full size key
100%
Keys marked (A)
The keys marked (A) can be set to show any ratio using "Add or Change Extra Preset Ratios" in the system settings
(administrator).
The keys marked (A) can be set to show any ratio using "Add or Change Extra Preset Ratios" in the system settings
(administrator).
4
Touch a preset ratio key and zoom key
to select the desired ratio and touch the
[OK] key.
to select the desired ratio and touch the
[OK] key.
After touching the [OK] key, make sure that a paper size
suitable for the ratio is selected.
suitable for the ratio is selected.
• To quickly select a ratio, touch a reduction or enlargement key to select a ratio close to the desired ratio and then
use the zoom keys for fine adjustment.
• The zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.
• Touch the
key to increase the ratio, or the
key to decrease the ratio. (If you continue to touch the
/
key, the ratio will change automatically. After 3 seconds, the ratio will change rapidly.)
• If the message "Image is larger than the copy paper." appears when an enlargement ratio is selected, the image
may not fit on the paper.
5
Touch the [Job Detail Settings] key and
make sure that a suitable paper size is
selected for the ratio.
make sure that a suitable paper size is
selected for the ratio.
If "Auto" appears in the [Paper Select] key (B), auto paper
selection is enabled. If auto paper selection is not enabled,
select the paper size manually.
selection is enabled. If auto paper selection is not enabled,
select the paper size manually.
Copy Ratio
OK
70%
81%
Auto Image
XY Zoom
Menu
1
2
B4
A3
A3
B5
B4
B4
A4
A3
A3
B4
B5
A4
A5
A4
B5
B5
B4
B4
A5
A4
A4
B5
A4
A4
A3
B4
B4
B5
A3
A4
86%
115%
122%
141%
Zoom
100%
100
%
Copy Ratio
OK
50%
25%
400%
Auto Image
XY Zoom
Menu
1
2
Zoom
100%
100
%
200%
150%
75%
350%
300%
(A)
Copy Ratio
OK
70%
81%
Auto Image
XY Zoom
Menu
1
2
B4
A3
A3
B5
B4
B4
A4
A3
A3
B4
B5
A4
A5
A4
B5
B5
B4
B4
A5
A4
A4
B5
A4
A4
A3
B4
B4
B5
A3
A4
86%
115%
122%
141%
Zoom
100%
70
%
2-Sided Copy
Output
Special Modes
File
Quick File
Full Colour
Colour Mode
Auto
Exposure
70%
Copy Ratio
Job Detail
Settings
Plain
A4
Auto
Original
Paper Select
Special Modes
Auto A4
(B)
29
6
Press the [COLOUR START] key (
)
or the [BLACK & WHITE START] key
(
(
).
Scanning begins.
• If the originals were placed in the document feeder tray, the
originals are copied.
• If you placed the original on the document glass, scan each
page one page at a time. If you are using the sort function or
other function that requires all originals to be scanned before
the copies are printed, you must use the same [START] key
that you used to scan the first original to scan each of the
remaining originals.
other function that requires all originals to be scanned before
the copies are printed, you must use the same [START] key
that you used to scan the first original to scan each of the
remaining originals.
To cancel scanning of the original and copying...
Press the [STOP] key (
Press the [STOP] key (
).
To return the ratio to 100%...
To return the ratio setting to 100%, touch the [Copy Ratio] key to display the ratio menu and then touch the [100%] key.
To return the ratio setting to 100%, touch the [Copy Ratio] key to display the ratio menu and then touch the [100%] key.
System Settings (Administrator): Add or Change Extra Preset Ratios
Two enlargement preset ratios (101% to 400%) and two reduction preset ratios (25% to 99%) can be added. An added
preset ratio can also be changed.
Two enlargement preset ratios (101% to 400%) and two reduction preset ratios (25% to 99%) can be added. An added
preset ratio can also be changed.
or
30
ENLARGING/REDUCING THE LENGTH AND WIDTH
SEPARATELY (XY Zoom)
SEPARATELY (XY Zoom)
The XY Zoom feature allows the horizontal and vertical copy ratios to be changed separately.
Both the horizontal and vertical ratios can be set from 25% to 400% in increments of 1%.
Both the horizontal and vertical ratios can be set from 25% to 400% in increments of 1%.
When 50% is selected for the horizontal ratio and 70% is selected for the vertical ratio
1
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
down on the document glass.
2
Touch the [Copy Ratio] key.
3
Touch the [XY Zoom] key.
4
Touch the [X] key.
The initial state of the [X] key is selected (highlighted), so this
step is normally not necessary. Touch the [X] key only if it is not
highlighted.
step is normally not necessary. Touch the [X] key only if it is not
highlighted.
Originals
Copies
1
1
Ready to scan for copy.
2-Sided Copy
Original
0
Output
Special Modes
File
Quick File
Full Colour
Colour Mode
Auto
Exposure
100%
Copy Ratio
A4
2.
3.
4.
1.
A4R
B4
A3
A3
A4
Job Detail
Settings
A4
Plain
Copy Ratio
OK
70%
81%
Auto Image
XY Zoom
Menu
1
2
B4
A3
A3
B5
B4
B4
A4
A3
A3
B4
B5
A4
A5
A4
B5
B5
B4
B4
A5
A4
A4
B5
A4
A4
A3
B4
B4
B5
A3
A4
86%
115%
122%
141%
Zoom
100%
100
%
Copy Ratio
OK
70%
64%
50%
141%
200%
400%
XY Zoom
Cancel
Zoom
100%
100
%
100
%
Y
X
Y
X
31
5
Touch one of the preset ratio keys (A)
and the zoom keys (B) to set the
horizontal (X) ratio.
and the zoom keys (B) to set the
horizontal (X) ratio.
(A) A preset ratio key will not become highlighted when
touched.
(B) The zoom keys can be touched to set the ratio from 25% to
400% in increments of 1%.
To quickly select a ratio, touch a preset ratio key (A) to select a ratio close to the desired ratio and then use the zoom
keys (B) for fine adjustment.
keys (B) for fine adjustment.
6
Touch the [Y] key.
7
Touch one of the preset ratio keys (A)
and the zoom keys (B) to set the vertical
(Y) ratio.
and the zoom keys (B) to set the vertical
(Y) ratio.
(A) A preset ratio key will not become highlighted when
touched.
(B) The zoom keys can be touched to set the ratio from 25% to
400% in increments of 1%.
If needed, you can touch the [X] key once again to readjust the X zoom.
8
Touch the [OK] key.
9
Touch the [Job Detail Settings] key and
make sure that a suitable paper size is
selected for the ratio.
make sure that a suitable paper size is
selected for the ratio.
If "Auto" appears in the [Paper Select] key (C), auto paper
selection is enabled. If auto paper selection is not enabled,
select the paper size manually.
selection is enabled. If auto paper selection is not enabled,
select the paper size manually.
Copy Ratio
OK
70%
64%
50%
141%
200%
400%
XY Zoom
Cancel
Zoom
100%
100
%
100
%
Y
X
Y
X
(A)
(B)
Copy Ratio
OK
70%
64%
50%
141%
200%
400%
XY Zoom
Cancel
Zoom
100%
50
%
100
%
Y
X
Y
X
Copy Ratio
OK
70%
64%
50%
141%
200%
400%
Zoom
100%
Cancel
XY Zoom
%
%
X
Y
50
100
(B)
(A)
Copy Ratio
OK
70%
64%
50%
141%
200%
400%
Zoom
100%
Cancel
XY Zoom
%
%
X
Y
50
70
Plain
4
2-Sided Copy
Output
Special Modes
File
Quick File
Full Colour
Colour Mode
Auto
Exposure
X 50% Y 70%
Copy Ratio
Job Detail
Settings
Auto
Original
Paper Select
Special Modes
Auto A4
(C)
Click on the first or last page to see other MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man15) service manuals if exist.