Sharp MX-2610N / MX-3110N / MX-3610N (serv.man14) Service Manual ▷ View online
MX-3610N MX-PNX5A/B/C/D (PUNCH MODULE) 26 – 3
D. Saddle finisher exterior attachment
1)
Fix the front inner cover with screws, and close the front
cover.
cover.
2)
Fix the front lower cover with a screw.
3)
Fix the rear cover with a screw.
E. Saddle finisher connection
1)
Install the saddle finisher to the main unit.
2)
Connect the connector.
F. Punch jam processing label attachment
1)
Open the front cover, attach the punch jam processing label.
1
2
2
3
2
1
2
2
1
1
2
000-0000
000-0000
1
2
Label attachment reference
MX-3610N MX-PNX5A/B/C/D (PUNCH MODULE) 26 – 4
G. Punch position label attachment
1)
Attach the punch position label (for the scanner).
2)
Attach the punch position label (for the RSPF).
H. Turn on the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
First label
Second label
Fit with the corner R.
Label attachment reference
Fit with the corner R.
* Corner of the upper
cabinet bottom
No clearance
Ridge line R2.5
R2.5 line of tangency
MX-3610N MX-TR12 (EXIT TRAY UNIT) 27 – 1
MX-3610N
Service Manual
[27] MX-TR12 (EXIT TRAY UNIT)
1. Unpacking
A. Packed items check
2. Installation
Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.
A. Right paper exit unit attachment
1)
Remove the right paper exit cover from the right paper exit
unit.
unit.
2)
Remove the connector cover.
3)
Remove the right upper cabinet of the ADU.
4)
Attach the right paper exit unit, and fix it with the screw.
Connect the connector.
Connect the connector.
No.
Name
Quantity
1
Paper exit tray
1
2
Right paper exit unit
1
3
Screw
4
4
Full detection actuator
1
1
2
3
4
2
1
1
1
1
1
2
1
1
2
2
2
2
2
1
MX-3610N MX-TR12 (EXIT TRAY UNIT) 27 – 2
5)
Attach the right paper exit cover, and fix it with the screw.
Connect the connector.
Connect the connector.
6)
Attach the connector cover.
B. Paper exit tray attachment
1)
Attach the paper exit tray and the full-detection actuator
included in the package.
included in the package.
Be careful of the installing direction of the full detection actua-
tor.
tor.
C. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
D. Tray setting
Use SIM26-1 to set the tray YES/NO.
1
2
2
2
2
2
2
1
1
2
Click on the first or last page to see other MX-2610N / MX-3110N / MX-3610N (serv.man14) service manuals if exist.