Sharp MX-2610N / MX-3110N / MX-3610N (serv.man14) Service Manual ▷ View online
MX-3610N MX-TU12 (EXIT TRAY CABINET) 22 – 1
MX-3610N
Service Manual
[22] MX-TU12 (EXIT TRAY CABINET)
1. Unpacking
A. Packed items check
2. Installation
Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.
A. Paper exit tray attachment
1)
Open the front cabinet, and remove the front cabinet upper.
2)
Attach the paper exit tray, and fix it with the screw.
3)
Attach the front cabinet upper, and close the front cabinet.
4)
Attach the paper holding arm.
5)
Attach the full detection actuator.
Be careful of the installing direction of the full detection actua-
tor.
tor.
No.
Name
Quantity
1
Paper exit tray
1
2
Screw
1
3
Paper holding arm
1
4
Full detection actuator
1
5
Paper exit cover
1
2
1
3
4
5
2
1
1
2
1
1
2
2
MX-3610N MX-TU12 (EXIT TRAY CABINET) 22 – 2
6)
Attach the paper exit cover.
B. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
MX-3610N MX-FN17 (FINISHER) 23 – 1
MX-3610N
Service Manual
[23] MX-FN17 (FINISHER)
1. Unpacking
A. Packed items check
2. Installation
Check to confirm that the firmware version is later than below.
If the version is older, upgrade the firmware.
Firmware version: 01.02.03.00
If the version is older, upgrade the firmware.
Firmware version: 01.02.03.00
Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.
A. Paper holding arm and paper exit full detection
actuator removal
1)
Remove the paper holding arm.
The paper holding arm must be removed together with the
paper holding arm holder. Since the paper holding arm is easy
to remove alone, be careful not to leave the paper holding arm
holder unremoved.
paper holding arm holder. Since the paper holding arm is easy
to remove alone, be careful not to leave the paper holding arm
holder unremoved.
2)
Remove the paper exit full detection actuator.
No.
Name
Quantity
1
Finisher
1
2
Attachment
1
3
Blinding bottom plate
1
4
Front rail guide
1
5
Path guide
1
6
Open/Close cover
1
7
Left rear cover
1
8
Punch F cover
1
9
Fulcrum upper cover
1
10
Take-up roller
1
11
Screw (M4 x 10 S tight)
1
12
Screw (M3 x 6 S tight, with flange)
4
13
Screw (M4 x 7 S tight)
5
14
Screw (M3 x 6 S tight)
3
15
Clip
1
16
Fulcrum shaft
1
17
Staple position label (For the scanner)
1
18
Staple position label (For the RSPF)
1
19
Safety cover
1
20
Protection sheet
1
11
12
13
14
15
16
17
18
19
20
2
1
4
3
5
8
9
10
6
7
MX-3610N MX-FN17 (FINISHER) 23 – 2
B. External fixture removal
1)
Open the front cabinet, and remove the front cabinet upper.
2)
Remove the paper exit cover.
3)
Remove the paper exit tray.
4)
Remove the left cabinet.
5)
Remove the left cabinet upper.
C. Packed items attachment
1)
Attach the safety cover to the attachment, and fix it with the
screw (M3 x 6 S tight, with flange).
screw (M3 x 6 S tight, with flange).
2)
Attach the attachment.
1
1
2
1
2
2
1
1
2
1
2
1
2
Click on the first or last page to see other MX-2610N / MX-3110N / MX-3610N (serv.man14) service manuals if exist.