DOWNLOAD Sharp MX-2610N / MX-3110N / MX-3610N (serv.man14) Service Manual ↓ Size: 26.68 MB | Pages: 127 in PDF or view online for FREE

MX-3610N  MX-FX11 (FACSIMILE EXPANSION KIT)  20 – 1

MX-3610N

Service Manual

 

Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.

1)

Remove the two screws on the rear cabinet of the main unit.
Attach the step screw (included in the package) to one of the
removed screw positions.

2)

Hang the Fax unit on the step screw. Fix the Fax unit with the
screws which were removed in the step 1).

1)

Remove the left cabinet.

2)

Remove the shield plate.

1

Fax  unit

1

2

Line cable

1

3

Ferrite core

2

4

Step screw

1

5

M3 screw

1

6

Line cable

1

2

1

4

3

5

6

U.K

France

Germany

Australia

For othe destinations

MX-3610N  MX-FX11 (FACSIMILE EXPANSION KIT)  20 – 2

1)

Connect the I/F cable to the MFP controller PWB, and fix the
binding band (and FG line (Taiwan only)) with the M3 screw
included in the package.

Check to confirm that it is securely connected.
20/23cpm/31cpm(G) machine (Except Taiwan)

1)

Attach the shield plate.

2)

Attach the left cabinet.

1)

Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.

1)

Enter the SIM26-6 mode.

2)

Check to confirm that the destination setting of the machine
matches the specifications of the FAX destination. If not, the
FAX may not function properly.

MX-3610N  MX-FX11 (FACSIMILE EXPANSION KIT)  20 – 3

1)

Enter the SIM66-2 mode.

2)

Press DEST CODE button.

3)

Take a note of the corresponding destination code.

4)

Press BACK button to return to the code entry mode.

5)

Enter the destination code taken in procedure 3), and press
SET button.

6)

Press EXECUTE and YES buttons.

1)

Connect the line cable on the line to the modular jack indicated
as “LINE.”

When connecting the line cable (to LINE or TEL), wind the line
cable two turns or one turn around the included ferrite core as
shown in the figure, and connect to the modular jack which is
marked with “LINE.”

After connection, perform the setting of “External telephone con-
nection" of the system setting (administrator).

About
10 cm

About
10 cm

2 turns

1 turn

MX-3610N  MX-LC11 (LARGE CAPACITY TRAY)  21 – 1

MX-3610N

Service Manual

 

Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.

1)

Remove the paper feed base fixing screw.

Before turning on the power, check to insure that the fixing
screw of the tray is removed. If the power is turned on without
removing the fixing screw, a trouble may be resulted.

1)

Attach the mounting plate upper to the right side of the main
unit with the fixing screw A.

When attachment, put the rubber section of the mounting plate
upper on the lower side.

2)

Remove the right door cover from the machine.

3)

Remove the right adjuster.

1

Large capacity tray unit

1

2

Mounting plate upper

2

3

Connection unit

1

4

Fixing screw A (Hexagon with seat, S-tight, M4 x 35)

4

5

Fixing screw B (Hexagon with seat, S-tight, M4 x 12)

2

6

Fixing screw C (screw 4 x 8 cup)

1

2

1

4

5

3

6