Sharp MX-2610N / MX-3110N / MX-3610N (serv.man14) Service Manual ▷ View online
MX-3610N MX-2010U/2310U/3111U/2610N/3110N/3610N (MAIN UNIT) 2 – 1
MX-3610N
Service Manual
[2] MX-2010U/2310U/3111U/2610N/3110N/3610N (MAIN UNIT)
1. Unpacking
A. Unpacking
B. Fixing tape and protection material removal
C. Packed items check
Developer bundle list
No.
Name
Quantity
1
Developer
4
2
Operation manual
1
Country
Model
MX-2310F/U
MX-3111F/U
MX-2010U
MX-2610FN/N
MX-3110FN/N
MX-3610FN/N
MX-3110FN/N
MX-3610FN/N
Japan
Yes
---
Yes
North America/South
America (Mexico/120v
except Brazil and
Argentina)
America (Mexico/120v
except Brazil and
Argentina)
Yes
---
Yes
Europe/UK
Yes
Yes
Yes
Australia/New Zealand
No
No
No
Philippines
No
No
No
Lebanon/Pakistan
No
No
No
Thailand
Yes
Yes
No
Egypt/Jordan
No
No
No
Tunisia/Morocco
No
No
No
Singapore/Malaysia/
Vietnam
Vietnam
Yes
Yes
No
Israel
No
No
No
India
Yes
Yes
No
Hong Kong
Yes
Yes
No
Brazil
No
No
No
1
2
MX-3610N MX-2010U/2310U/3111U/2610N/3110N/3610N (MAIN UNIT) 2 – 2
Yes: Developer is included with shipment.
No: Developer is not included with shipment.
No: Developer is not included with shipment.
D. Lock release
(1) Tray rotation plate lock release
1)
Pull out the tray. Turn the fixing material and remove it.
Remove the caution label.
Attach the removed fixing material to the position shown in the
figure for future use.
Close the tray which was pulled out.
Remove the caution label.
Attach the removed fixing material to the position shown in the
figure for future use.
Close the tray which was pulled out.
(2) Scanner (2/3 mirror unit) lock release
1)
Remove the optical unit fixing screw, and remove the note
label.
label.
2. Installation
When an optional paper feed desk is connected to the machine,
unpack and install the paper feed desk, then unpack the machine.
Place the machine on the option desk securely, and perform the
installing procedures of the machine.
Place the machine on the optional desk firmly and secure.
unpack and install the paper feed desk, then unpack the machine.
Place the machine on the option desk securely, and perform the
installing procedures of the machine.
Place the machine on the optional desk firmly and secure.
A. Developer installation
Be careful not to leave fingerprints or oily dirt on the DV roller sur-
face.
face.
1)
Open the front cabinet. Slide the lock to release, and remove
the waste toner box.
the waste toner box.
2)
Turn the drum cover securing locks (2) to release, and then
raise the drum positioning cover.
raise the drum positioning cover.
Yemen/Saudi Arabia/
Barren/Kuwait/UAE/
Oman/Qatar
Barren/Kuwait/UAE/
Oman/Qatar
No
No
No
Taiwan
No
Yes
No
Country
Model
MX-2310F/U
MX-3111F/U
MX-2010U
MX-2610FN/N
MX-3110FN/N
MX-3610FN/N
MX-3110FN/N
MX-3610FN/N
2
1
3
1
2
MX-3610N MX-2010U/2310U/3111U/2610N/3110N/3610N (MAIN UNIT) 2 – 3
3)
While pressing the lever, pull out the developing unit to
remove.
remove.
4)
Open the cover to remove.
There are two types of the developing unit; (1) the DV cover is
fixed with the DV cover fixing screw, and (2) the DV cover is
fixed with a hook only.
For the type where the DV cover is fixed only a hook, do not
use a screw for fixing.
Otherwise, the DV roller may be damaged.
For the type where the DV cover is fixed with the fixing screw,
there is a groove in the fixing screw hole section as shown in
the figure below.
In some production lots, a sheet is attached instead of this.
fixed with the DV cover fixing screw, and (2) the DV cover is
fixed with a hook only.
For the type where the DV cover is fixed only a hook, do not
use a screw for fixing.
Otherwise, the DV roller may be damaged.
For the type where the DV cover is fixed with the fixing screw,
there is a groove in the fixing screw hole section as shown in
the figure below.
In some production lots, a sheet is attached instead of this.
5)
Loading developer to the developing units.
Be sure to shake the bag of developer thoroughly before pour-
ing into the developing unit.
ing into the developing unit.
When pouring the developer into the unit, use care to not get
developer in to the drive section.
developer in to the drive section.
6)
Attach the cover.
7)
Shake the developing unit several times horizontally and
strongly.
strongly.
2
1
1
2
2
1
MX-3610N MX-2010U/2310U/3111U/2610N/3110N/3610N (MAIN UNIT) 2 – 4
8)
Open the toner shutter of the developing unit and check to
confirm that there is proper amount of developer. If not, per-
form procedure 7) again.
confirm that there is proper amount of developer. If not, per-
form procedure 7) again.
• Check that there is proper amount of developer.
(The stirring screw can be partly seen.)
• There is no developer in the shutter position.
• There is too much developer.
(The stirring screw cannot be seen.)
Be sure to keep the developing unit level while supplying the
developer.
developer.
9)
Insert the developing unit so as not to give a strong shock to
the main unit gently.
the main unit gently.
Slide the developing unit horizontally into the machine, in the
direction of the arrow, until developing unit locks into. place.
Do not push the unit diagonally, as contact with the drum may
occur causing damage.
direction of the arrow, until developing unit locks into. place.
Do not push the unit diagonally, as contact with the drum may
occur causing damage.
When removing or installing the developing unit, put your hand
from below the unit and slide it in parallel along the guide.
At that time, be careful not to touch the roller surface.
from below the unit and slide it in parallel along the guide.
At that time, be careful not to touch the roller surface.
When installing the machine, there is no need to remove or
install the OPC drum unit. If it must be removed or installed for
any reason, follow the procedures below. When removing or
installing the OPC drum unit, put your hand from below the unit
and slide it in parallel along the guide on the right side.
At that time, be careful not to touch the OPC drum surface.
install the OPC drum unit. If it must be removed or installed for
any reason, follow the procedures below. When removing or
installing the OPC drum unit, put your hand from below the unit
and slide it in parallel along the guide on the right side.
At that time, be careful not to touch the OPC drum surface.
10) Close the drum positioning cover, and lock it.
2
1
Click on the first or last page to see other MX-2610N / MX-3110N / MX-3610N (serv.man14) service manuals if exist.