Sharp MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man3) Handy Guide ▷ View online
13
Document Solutions After Sales Service
Colour Calibration
Automatic Colour Calibration
-
FACTORY MODE
Engine
Printer
Sim 63-11
Default Colour Balance Setting:
Def 1 Standard Colour Balance setting
(Default).
Def 2 Colour balance with slightly
strong
(Default).
Def 2 Colour balance with slightly
strong
cyan.
Def 3 Colour balance with emphasis on
Cyan.
Cyan.
Sim 67-26
Default Colour Balance Setting:
Def 1 Standard Colour Balance setting
(Default).
Def 2 Colour balance with slightly
strong
(Default).
Def 2 Colour balance with slightly
strong
cyan.
Def 3 Colour balance with emphasis on
Cyan.
Cyan.
Sim 46-24
Auto Half Tone Calibration:
Automatic Colour Calibration –
FACTORY MODE
Place printed test pattern onto glass
Sim 67-24
Auto Half Tone Calibration:
Automatic Colour Calibration –
FACTORY MODE
Place printed test pattern onto glass
Manual Colour Calibration
–
SERVICE MODE
Engine
Printer
Sim 44-06
High Density Process Control
Correction
Correction
(Force Execution)
“Execute”
Sim 44-06
High Density Process Control
Correction
Correction
(Force Execution)
Sim 44-26
Half Tone Image Correction:
Half Tone Correction Force Execution
“Execute”
Sim 44-26
Half Tone Image Correction:
Half Tone Correction Force Execution
Sim 46-24
Auto Half Tone Calibration:
Automatic Colour Calibration –
SERVICE MODE
Place printed test pattern onto glass
Sim 67-24
Auto Half Tone Calibration:
Automatic Colour Calibration –
SERVICE MODE
Place printed test pattern onto glass
Sim 46-21
Manual Half Tone Adjustment:
Adjust CMYK (15 points) for engine.
Sim 67-25
Manual Half Tone Adjustment:
Adjust CMYK (15 points) for printer.
14
Document Solutions After Sales Service
Colour Calibration
Continue Engine Procedure
Sim 64-05 & 64-06
Printer Test Page
PCL & PS Printer Density Check
(PS where fitted).
(PS where fitted).
Sim 44-21
Manual Half Tone Adjustment
Registration:
Registration:
Execute to register service target
“Execute”
Continue Printer Procedure
Sim 44-26
Half Tone Image Correction:
Half Tone Correction Force Execution
“Execute”
Sim 44-26
Half Tone Image Correction:
Half Tone Correction Force Execution
Sim 63-07
Service Target Colour Balance
Setup:
Setup:
Scanner Target Colour Balance setup
SERVICE MODE
Scan Test Pattern
Sim 67-27
Service Target Colour Balance
Setup:
Setup:
Printer Target Colour Balance setup
SERVICE MODE
Scan Test Pattern
DEFAULT SETTING (Service Mode
)
To return machine to “Standard” setting :-
Engine
Printer
Sim 63-08
Standard Service Target Setting:
Reset Service target to default
“Execute”
Sim 67-28
Standard Service Target Setting:
Reset Service Target to default.
Sim 46-24
Auto Half Tone Calibration:
Automatic Colour Calibration –
SERVICE MODE
Place printed test pattern onto glass
Sim 67-24
Auto Half Tone Calibration:
Automatic Colour Calibration –
SERVICE MODE
Place printed test pattern onto glass
15
Document Solutions After Sales Service
Maintenance
Maintenance Indications
:
DK
Black Drum (Counter) has reached
the specified life.
Replace Black Drum
Process
Section
(Drum)
DC
Cyan Drum (Counter) has reached
the specified life.
Replace Cyan Drum
DM
Magenta Drum (Counter) has reached
the specified life.
Replace Magenta
Drum.
DY
Yellow Drum (Counter) has reached
the specified life.
Replace Yellow Drum.
VK
Black Developer (Counter) has reached
the specified life.
Replace Black
Developer.
Process
Section
(Developer)
VC
Cyan Developer (Counter) has reached
the specified life.
Replace Colour
Developer Kit.
VM
Magenta Developer (Counter) has reached the
specified life.
VY
Yellow Developer (Counter) has reached
the specified life.
FK1
Fuser Unit Print Counter (U) has reached the
specified limit.
Replace the Upper
Fuser Roller Kit.
Fuser Section
TK1
Primary Transfer Unit Counter has reached the
specified limit.
Replace the Primary
Transfer Belt and/or
Rollers.
Transfer
Section
TK2
Secondary Transfer Unit Counter has reached
the specified limit.
Replace the Secondary
Transfer Belt and
Roller.
TA
Maintenance [All] Counter has reached specified limit
CA
Maintenance [Colour] Counter has reached specified limit
AA
Maintenance [All] & [Colour] Counters have reached the specified limits
Starting Powder:
The following starting powder should be applied to the relevant consumable item during maintenance:‐
Model
OPC Drum
Primary Transfer Belt
MX2301N
MX2600N
MX3100N
MX2600N
MX3100N
UKOG‐0312FCZZ
[Stearic Acid]
UKOG‐0123FCZZ
[Kynar Powder]
CAUTION:
Do not apply Stearic Acid (UKOG‐0312FCZZ) starting powder to the Primary Transfer Belt.
16
Document Solutions After Sales Service
Maintenance
MX2301 – MX2600 – MX3100
Total (Mono) Maintenance Counter
A
100K
B
200K
A
300K
A
400K
A
500K
Process
MX‐31GRSA
OPC Drum ‐ Black
MX‐310MK
Main Charge Kit [K]
MX‐31GVBA
Developer ‐ Black
MX‐310DS
DV Seal ‐Black
Fuser
MX‐310UH
Upper Heat Roller Kit
x
x
x
MX‐310LH
Lower Heat Roller Kit
x
x
x
Image
Transfer
MX‐310B1
Primary Transfer Belt
x
x
x
MX‐310X1
Primary Transfer Roller
x
x
x
MX‐310B2
Secondary Transfer Belt
Kit
x x
x
x
MX‐310X2
Secondary Transfer
Roller Kit
x x
x
x
Misc
MX‐310FL
Filter Kit
MX‐310PD
PS Paper Dust Removing
Kit
Colour Maintenance Counter
Colour
60K
120K
180K
240K
300K
Process
MX‐31GRSA
OPC Drum – CMY
MX‐310MK
Main Charge Kit
MX‐310VSA
Developer – CMY
MX‐310DS
DV Seal ‐CMY
Click on the first or last page to see other MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man3) service manuals if exist.