Sharp DX-CS10 Service Manual ▷ View online
[4] Preventive maintenance
4-1
[4] Preventive Maintenance
Maintenance Table
Item
Practitioner
Contents
Cycle
Note
TM sensor
User / CE
Cleaning
As needed The alert message is indicated.
ADF Target Glass
User / CE
Cleaning
As needed In case of line problem occurs
when ADF use.
Contact Glass
User / CE
Cleaning
As needed In case of dirt image is occurred
by dirty contact glass.
Fuser unit
CE
Replace
90K
The Alert message is indicated.
Middle transfer unit
CE
Replace
90K
The Alert message is indicated.
2
nd
transfer roller
CE
Replace
90K
The Alert message is indicated.
AIO (B,C,M,Y)
User / CE
Replace
5K *1
The Alert message is indicated.
Waste toner bottle
User / CE
Replace
Approx.
25K prints/
bottle
The Alert message is indicated.
(See condition 4)
Condition:
1. The condition is standard temperature and humidity.
1. The condition is standard temperature and humidity.
2. These yield values may change depending on the circumstances and printing
conditions.
3. The Waste Toner Bottle's yield is measured when the printer is used 50% for color and
50% for black-and-white
4. Waste Toner Bottle yield was measured for 3P/J when the printer is used 50% for color
and 50% for black-and-white.
*1: measured by ISO19798
[4] Preventive maintenance
4-2
Yield items and Service Maintenance
The machine default setting will show the messages “Replace Soon” at the near end
condition and “Replace Now” at the end condition for yield parts. However, you can select
the preferred machine action at near end and end for yield parts using SP mode “PM Parts
Rep Notice” as shown in the following table.
There are 4 settings (0 to 3):
PM Parts Rep
Notice
Sets whether to display the PM parts replacement notice and whether
to stop the engine.
0
At near end: No Notice / Not Stopped
At life end: Notice “Replace Now” / Not Stopped
1
At near end: No Notice / Not Stopped
At life end: No Notice / Not Stopped
2 (default)
At near end: Notice / Not Stopped
At life end: Notice “Replace Now” / Not Stopped
3
At near end: Notice “Replace Soon” / Not Stopped
At life end: Notice “Replace Now” / Stopped
Item
Yield
Image Transfer Unit
90 K
Fusing Unit
90 K
Transfer Roller
90 K
[4] Preventive maintenance
4-3
Replacing Print Cartridge
• Do not incinerate toner (new or used) or toner containers. Doing so risks burns. Toner will
ignite on contact with naked flame.
• Do not store toner (new or used) or toner containers anywhere near naked flames. If doing
so, there are risks fire and burns. Toner will ignite on contact with naked flame.
• Keep the polythene materials (bags, gloves, etc.) supplied with this machine away from
babies and small children at all times. Suffocation can result if polythene materials are
brought into contact with the mouth or nose.
brought into contact with the mouth or nose.
• Do not crush or squeeze toner containers. Doing so can cause toner spillage, possibly
resulting in dirtying of skin, clothing, and floor, and accidental ingestion.
• Store toner (new or used), toner containers, and components that have been in contact with
toner out of reach of children.
• If toner or used toner is inhaled, gargle with plenty of water and move into a fresh air
environment. Consult a doctor if necessary.
• When removing jammed paper or replacing toner, avoid getting toner (new or used you’re
your clothing. If toner comes into contact with your clothing, wash the stained area with cold
water.
water.
• Hot water will set the toner into the fabric and make removing the stain impossible.
• When removing jammed paper or replacing toner, avoid getting toner (new or used you’re
• When removing jammed paper or replacing toner, avoid getting toner (new or used you’re
your skin. If toner comes into contact with your skin, wash the affected area thoroughly with
soap and water.
soap and water.
• If toner or used toner gets into your eyes, flush immediately with large amounts of water.
Consult a doctor if necessary.
• If toner or used toner is swallowed, dilute by drinking a large amount of water. Consult a
doctor if necessary.
• Store print cartridges in a cool dark place.
• Actual printable numbers vary depending on image volume and density, number of pages
• Actual printable numbers vary depending on image volume and density, number of pages
printed at a time, paper type and size, and environmental conditions such as temperature
and humidity.
and humidity.
• Toner quality degrades over time. Early replacement of the print cartridge might be
necessary.
[4] Preventive maintenance
4-4
• Therefore, we recommend you always keep a new print cartridge ready.
• For good print quality, the manufacturer recommends that you use genuine toner from the
• For good print quality, the manufacturer recommends that you use genuine toner from the
manufacturer.
• The manufacturer shall not be responsible for any damage or expense that might result from
the use of parts other than genuine parts from the manufacturer with your office products.
Messages on the screen
• Replace the indicated print cartridge when any of the following messages appear on the
screen:
"Out of Toner: Black"
"Out of Toner: Magenta"
"Out of Toner: Cyan"
"Out of Toner: Yellow"
"Out of Toner: Magenta"
"Out of Toner: Cyan"
"Out of Toner: Yellow"
• Prepare the indicated print cartridge when any of the following messages appear on the
screen:
“Toner Almost Empty Replace Required Soon: Toner Cartridge (Black)”
“Toner Almost Empty Replace Required Soon: Toner Cartridge (Magenta)”
“Toner Almost Empty Replace Required Soon: Toner Cartridge (Cyan)”
“Toner Almost Empty Replace Required Soon: Toner Cartridge (Yellow)”
“Toner Almost Empty Replace Required Soon: Toner Cartridge (Magenta)”
“Toner Almost Empty Replace Required Soon: Toner Cartridge (Cyan)”
“Toner Almost Empty Replace Required Soon: Toner Cartridge (Yellow)”
• Do not allow paper clips, staples, or other small objects to fall inside the machine.
• Do not expose the print cartridge without its cover to direct sunlight for a long time.
• Do not touch the print cartridge's photo conductor unit.
• Do not expose the print cartridge without its cover to direct sunlight for a long time.
• Do not touch the print cartridge's photo conductor unit.
• Do not touch the ID chip on the side of the print cartridge as indicated in the illustration
below.
Click on the first or last page to see other DX-CS10 service manuals if exist.