Sharp DX-CS10 Service Manual ▷ View online
[2] Consumable parts
2-2
(4) Opened condition (Inside the machine)
Machine installation condition
Warranty period: 12 months
3. Production control number (lot No.) identification
<Print Cartridge>
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19
◇ ▲ ▲ □ □ □ □ □ □ ○ ○ ○ ○ ◎ ◎ ◎ ◎ ◎ ◎
◇：Color code K：Back / C：Cyan / M：Magenta / Y：Yellow
▲：Life ** ： *.*k
□：Model Code
○：Production date （YYMM）
◎：Serial number (Product serial number per month)
[3] Installation
3-1
[3] Installation Requirements
1. Installation Requirements
1-1. Environment
1. Temperature Range: 10°C to 32°C (50°F to 89.6°F)
2. Humidity Range: 15% to 80% RH
3. Ambient Illumination: Less than 2,000 lux (do not expose to direct sunlight)
4. Ventilation: 3 times/hr/person
5. Do not put the machine in areas that get sudden temperature changes. This includes:
2. Humidity Range: 15% to 80% RH
3. Ambient Illumination: Less than 2,000 lux (do not expose to direct sunlight)
4. Ventilation: 3 times/hr/person
5. Do not put the machine in areas that get sudden temperature changes. This includes:
Areas directly exposed to cool air from an air conditioner
Areas directly exposed to heat from a heater.
6. Do not put the machine in areas that get exposed to corrosive gas.
7. Do not install the machine at locations over 2,000 m (6,560 ft.) above sea level.
8. Put the machine on a strong, level base. (Inclination on any side must be no more than
7. Do not install the machine at locations over 2,000 m (6,560 ft.) above sea level.
8. Put the machine on a strong, level base. (Inclination on any side must be no more than
5 mm.)
9. Do not put the machine in areas with strong vibrations.
[3] Installation
3-2
1-2. Machine level
Front to back: Within 5 mm (0.2") of level
Right to left: Within 5 mm (0.2") of level
Right to left: Within 5 mm (0.2") of level
1-3. Machine Space Requirement
Put the machine near the power source with these clearances:
DX-C200P
Left side: Over 20 cm (7.9")
Rear: Over 10 cm (4")
Right side: Over 10 cm (4")
Front: Over 70 cm (27.5")
Rear: Over 10 cm (4")
Right side: Over 10 cm (4")
Front: Over 70 cm (27.5")
[3] Installation
3-3
DX-C200
Left side: Over 20 cm (7.9")
Rear: Over 20 cm (7.9")
Right side: Over 10 cm (4")
Front: Over 70 cm (27.5")
Top: Over 24 cm (9.5")
Rear: Over 20 cm (7.9")
Right side: Over 10 cm (4")
Front: Over 70 cm (27.5")
Top: Over 24 cm (9.5")
Power Requirements
Make sure that the plug is tightly in the outlet.
Avoid multi-wiring.
Make sure that you ground the machine.
Input voltage level
120 V, 60 Hz: More than 11 A (for North America)
220 V to 240 V, 50 Hz/60 Hz: More than 6 A (for Europe/ Asia)
220 V to 240 V, 50 Hz/60 Hz: More than 6 A (for Europe/ Asia)
Permitted voltage fluctuation: 10%
Do not set anything on the power cord.
Click on the first or last page to see other DX-CS10 service manuals if exist.