Sharp AR-SP8 Service Manual ▷ View online
AR-SP8/RP8 DISASSEMBLY AND ASSEMBLY 4 - 3
Transport unit removal
1) Remove two screws.
2) Remove the document tray unit.
3) Remove five screws.
4) Remove the transport unit.
E. Belt
1) Remove the belt.
F. SPF motor
1) Remove the harness.
2) Remove four screws.
3) Remove the drive unit.
4) Remove the belt.
5) Remove two screws.
6) Remove the SPF motor.
G. Paper entry sensor
1) Loosen the screw.
2) Open the paper exit paper guide.
3) Remove the paper entry sensor.
4) Remove the harness.
1
2
1
3
3
3
3
4
3
1
1
2
3
1
2
2
4
5
5
6
4
3
2
1
AR-SP8/RP8 DISASSEMBLY AND ASSEMBLY 4 - 4
H. PS roller
1) Remove the parts.
2) Remove the paper supply roller.
I.
Paper exit roller
1) Remove the parts.
2) Remove the paper exit roller.
2. AR-RP8 (RSPF)
A. Intermediate tray
1) Remove the intermediate tray.
B. Upper cover
1) Remove four screws from the bottom of the main body.
2) Remove the upper cover.
C. Pickup unit
1) Remove the belt, the paper feed frame spring, and two harnesses.
2) Remove the pickup unit.
Note: When reassembling, be careful of the hole position for the paper
feed frame spring.
1
1
2
1
2
1
1
1
2
1
1
1
1
2
1
1
AR-SP8/RP8 DISASSEMBLY AND ASSEMBLY 4 - 5
D. Upper cover of the pickup unit.
1) Remove two screws from the bottom of the pickup unit.
2) Remove the upper cover.
E. Sensor PWB
1) Remove two screws.
2) Remove the sensor PWB.
3) Remove the harness.
F. Pickup solenoid
1) Remove two screws.
2) Remove the pickup solenoid.
Note: When reassembling, hang the iron core on the solenoid arm.
G. Clutch
(1) Remove the clutch unit.
1) Remove the E-ring.
2) Remove the pulley and the bush.
3) Slide the bush in the arrow direction.
4) Lift the clutch pawl.
5) Remove the clutch unit.
1
2
1
1
1
2
3
1
2
A
1
5
2
4
3
AR-SP8/RP8 DISASSEMBLY AND ASSEMBLY 4 - 6
(2) Remove the clutch
1) Remove the E-ring.
2) Remove the parts.
H. Manual paper feed roller, pickup roller
(1) Remove the pickup unit.
1) Lift the paper stopper.
2) Slide the take-up roller unit.
3) Slide the bushing in the arrow direction.
4) Remove the take-up roller.
Note: When reassembling, hang the convex portion of the roller unit
on the solenoid arm.
(2) Remove the Manual paper feed roller, pickup roller.
1) Remove the parts.
2) Remove the manual paper feed roller.
3) Remove the pickup roller.
4) Remove the parts.
I.
Transport unit removal
1) Disconnect the connector, and cut the binding band.
2) Remove two screws, and remove the document tray unit.
3) Remove five screws, and remove the transport unit.
1
2
1
4
2
3
A
1
2
3
1
1
4
3
4
5
1
3
5
5
5
6
2
Click on the first or last page to see other AR-SP8 service manuals if exist.