Sharp AR-SP8 Service Manual ▷ View online
AR-SP8/RP8 DISASSEMBLY AND ASSEMBLY 4 - 7
J. Belt 1
1) Remove the belt.
K. Belt 2
1) Remove three screws.
2) Remove the drive unit.
3) Remove the belt.
Note: When reassembling, hang the belt on the boss.
L. SPF motor
1) Remove the harness.
2) Remove two screws.
3) Remove the SPF motor.
M. Solenoid
1) Remove the harness.
2) Remove two screws.
3) Remove the solenoid.
N. Clutch
1) Cut the band with nippers.
2) Remove the harness.
3) Remove the clutch.
1
1
2
3
1
1
2
3
1
2
3
1
1
2
3
AR-SP8/RP8 DISASSEMBLY AND ASSEMBLY 4 - 8
O. Paper supply roller
(1) Remove the parts.
1) Remove the two screws.
2) Remove the parts.
(2) Remove the paper supply roller.
1) Loosen the screw.
2) Open the paper exit paper guide.
3) Remove the parts.
4) Remove the paper supply roller.
P. Paper entry sensor
1) Loosen the screw.
2) Open the paper exit paper guide.
3) Remove the paper entry sensor.
4) Remove the harness.
Q. Transport roller 1.
(1) Remove the parts.
1) Remove the parts.
1
2
1
2
1
3
3
4
1
4
2
3
1
1
1
AR-SP8/RP8 DISASSEMBLY AND ASSEMBLY 4 - 9
(2) Remove the parts.
1) Loosen the screw.
2) Open the paper exit paper guide.
3) Remove the parts.
(3) Remove the transport roller.
1) Remove the paper exit paper guide.
2) Remove the transport roller.
R. Paper exit roller
(1) Remove the parts.
1) Remove two screws.
2) Remove the parts.
(2) Remove the paper feed paper guide upper.
1) Remove two screws.
2) Remove the paper feed paper guide upper.
1
2
3
1
2
1
1
2
1
2
AR-SP8/RP8 DISASSEMBLY AND ASSEMBLY 4 - 10
(3) Remove the paper exit roller.
1) Remove the parts.
2) Remove the paper exit roller.
S. Solenoid
(1) Remove the reverse gate
1) Remove the ring
2) Remove the reverse gate
Note: When reassembling, be careful of the groove and the hole
positions of the spring.
Note: When reassembling, hang 2) on the solenoid.
(2) Remove the solenoid.
1) Remove the screw.
2) Remove the solenoid.
1
1
2
1
2
1
2
Click on the first or last page to see other AR-SP8 service manuals if exist.