Sharp AR-NC1D (serv.man10) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 020a.doc
Page: 13 of 17
19.
You are now asked if you wish to perform a test page. (Although you still need to
set-up the machines configuration and printer driver default settings, you can perform
a test print at this point to test the connection to the machine).
set-up the machines configuration and printer driver default settings, you can perform
a test print at this point to test the connection to the machine).
20.
The settings you have entered throughout the installation process are now listed for
you to check before the printer driver installation is completed. Click Finish to
complete this part of the installation.
you to check before the printer driver installation is completed. Click Finish to
complete this part of the installation.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 020a.doc
Page: 14 of 17
21.
At this point, a message may appear saying that this software has not been tested for
Windows 2000. You may ignore this and press Yes to continue the installation, or
abort this installation and obtain the latest signed drivers.
Windows 2000. You may ignore this and press Yes to continue the installation, or
abort this installation and obtain the latest signed drivers.
22.
We can now see the installed shared printer driver. This printer driver must now be
configured for any additional options such as a finisher, additional memory etc. The
printer driver defaults will also need to be set-up.
configured for any additional options such as a finisher, additional memory etc. The
printer driver defaults will also need to be set-up.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 020a.doc
Page: 15 of 17
Configuring the Printer Driver
23.
Right click the installed printer driver and select Properties from the bottom of the
menu. Click on the Configuration tab as shown. The greyed out boxes have been
automatically configured from the model number that you chose earlier. Configure
the Input Tray, Finisher and Installed RAM to match the machine you will be printing
to.
menu. Click on the Configuration tab as shown. The greyed out boxes have been
automatically configured from the model number that you chose earlier. Configure
the Input Tray, Finisher and Installed RAM to match the machine you will be printing
to.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 020a.doc
Page: 16 of 17
Setting the Printer Driver Defaults
24.
Right click the installed printer driver and select Printing Preferences from the menu,
or whilst in the properties of the driver as above, click the General Tab. The following
will be displayed. Click on Printing Preferences and set the default settings for the
printer driver.
or whilst in the properties of the driver as above, click the General Tab. The following
will be displayed. Click on Printing Preferences and set the default settings for the
printer driver.
25.
Typical default settings that may be configured could be the paper size, output tray,
staple selection etc.
staple selection etc.
Click on the first or last page to see other AR-NC1D (serv.man10) service manuals if exist.