DOWNLOAD Sony SS-SX7 Service Manual ↓ Size: 358.02 KB | Pages: 6 in PDF or view online for FREE

Model
SS-SX7
Pages
6
Size
358.02 KB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
ss-sx7.pdf
Date
PREV: Sony HCD-SX7 / HCD-SX7B Service Manual

Sony SS-SX7 Service Manual ▷ View online

SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
SS-SX7
SPECIFICATIONS
SPEAKER SYSTEM
9-896-164-02
2015G33-1
© 
2015.07
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Ver. 1.1  2015.07
•  SS-SX7 is Speaker system in CMT-SX7/SX7B.
Speaker system: 
2-way speaker system, Bass Reflex
Woofer: 100 mm, cone type
Tweeter: 27 mm, Balanced soft dome type
Rated impedance: 
6 ohms
Dimensions (W/H/D):
Approx. 145 mm x 245 mm x 225 mm
Mass: 
Approx. 3.5 kg (per unit)
Design and specifications are subject to 
change without notice.
SS-SX7
2
SECTION  1
DISASSEMBLY
• 
This set can be disassembled in the order shown below.
1-1.  DISASSEMBLY  FLOW
Note: Follow the disassembly procedure in the numerical order given.
1-2.  LOUDSPEAEKER (10 cm) (WOOFER) (SP1)
SET
1-2.  LOUDSPEAEKER (10 cm) 
 (WOOFER) 
(SP1)
 (Page 
2)
1-4. LOUDSPEAKER (19 mm) 
 (TWEETER) 
(SP2)
 (Page 
4)
1-5.  TERMINAL
 (Page 
4)
1-3. TWEETER 
BLOCK
 (Page 
3)
Note: Please remove grille frame assy.
1 four hex. socket
 screws 
(3.5)
2 WF cover
5 loudspeaker (10 cm) (Woofer) 
 (SP1)
3 Pull out the loudspeaker 
 
(10 cm) (Woofer) (SP1).
loudspeaker (10 cm) 
(Woofer) (SP1)
terminal 
(wide side)
terminal 
(narrow side)
terminal position
‡,QVWDOODWLRQGLUHFWLRQIRUWKHORXGVSHDNHU
FP:RRIHU63
–
5HDUYLHZ–
protrusion
protrusion
4 Push the protrusion, 
 
and remove the 
 
terminal (wide side).
4 Push the protrusion, 
 
and remove the 
 
terminal (narrow side).
SS-SX7
3
1-3.  TWEETER  BLOCK
2 two hex. socket
 screws 
(3.5)
1 two catch pins
4 All bosses are removed while
 
moving jig in the direction of
 
the arrow, and TW panel 
 
block is removed.
4 All bosses are removed while
 
moving jig in the direction of
 
the arrow, and TW panel 
 
block is removed.
3 Insert the jig into a space and raise 
 
TW panel block.
 Note: When using a jig, please work so 
 
 
as not to injure TW panel block.
3 Insert the jig into a space and raise 
 
TW panel block.
 Note: When using a jig, please work so 
 
 
as not to injure TW panel block.
total four bosses
5 Pull out the tweeter block.
7 tweeter block
terminal 
(wide side)
terminal 
(narrow side)
– Rear view –
– Rear view –
protrusion
protrusion
6 Push the protrusion, 
 
and remove the 
 
terminal (narrow side).
6 Push the protrusion, 
 
and remove the 
 
terminal (wide side).
‡
 JIG
  When disassembling the unit, use the following 
  jig for speaker removal.
 Part No. 
Description
  J-2501-238-A  JIG FOR SPEAKER REMOVAL
SS-SX7
4
1-4.  LOUDSPEAKER (19 mm) (TWEETER) (SP2)
1-5. TERMINAL 
(TM1)
1 two tapping screws (1) 
 (3.5 
u 14)
3 loudspeaker (19 mm) 
 (tweeter) 
(SP2)
2 TW panel
– Inner view –
terminal 
(wide side)
terminal 
(narrow side)
top side
2 Pull out the terminal block.
terminal 
(wide side)
terminal 
(narrow side)
– Rear bottom view –
– Rear view –
protrusion
protrusion
3 Push the protrusion, 
 
and remove the 
 
terminal (wide side).
3 Push the protrusion, 
 
and remove the 
 
terminal (narrow side).
1 four screws
 (B3 
u 20)
4 terminal (TM1)
Ver. 1.1
Page of 6
Display

Sony SS-SX7 Service Manual ▷ Download

  • DOWNLOAD Sony SS-SX7 Service Manual ↓ Size: 358.02 KB | Pages: 6 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony SS-SX7 in PDF for free, which will help you to disassemble, recover, fix and repair Sony SS-SX7 Audio. Information contained in Sony SS-SX7 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.

RANDOM: