DOWNLOAD Sharp AR-NC1D (serv.man10) Service Manual ↓ Size: 809.1 KB | Pages: 18 in PDF or view online for FREE

Model
AR-NC1D (serv.man10)
Pages
18
Size
809.1 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / Modified ARNC1D 3D-009 Installation on a Windows 2000 Network
File
ar-nc1d-sm10.pdf
Date

Sharp AR-NC1D (serv.man10) Service Manual / Technical Bulletin ▷ View online

 
Sharp Electronics (UK) Ltd., NIS Systems Support 
 
NIS Bulletin 020a.doc 
 
Page:  1 of 17 
 
 
 
 
 
 
Installation under a Windows 2000 
Network
 
 
 
Model Name:  
ARNC1D/3D 
 
Pre-requisites:  
IP Address assigned to the ARNC1D/3D network card. Microsoft 
Windows 2000 CD.  Sharp ARPB2/+ NT4 Printer Drivers (Version 3 
Drivers only). 
 
Note:  
It may be necessary to use the Microsoft Windows 2000 CD during 
installation. 
 
Items in italics indicate icons, buttons or menu options during 
installation. 
 
 
Procedure:  
1.  Start Windows 2000. 
2. From 
the 
Start menu go to Settings and then Printers
3. In 
the 
Printers dialog box, double-click on Add Printer. 
 
               
                                              
 
 
Date:  
20
th
 January 2001 
Model:  
ARNC1D/3D 
Ref: 009a 
Colour Code: 
Orange (C) 
Page: 
 
1 of 17 
NIS SYSTEMS SUPPORT 
BULLETIN
 
 
Sharp Electronics (UK) Ltd., NIS Systems Support 
 
NIS Bulletin 020a.doc 
 
Page:  2 of 17 
 
4. 
The welcome screen will appear, click the Next button. 
 
 
                              
 
 
5. 
If you are going to print to the copier using a parallel cable or the TCP/IP protocol, 
select Local Printer and click Next
 
 
 
 
 
 
6. 
The Wizard will now request the communications port: 
 
NOTE:   
LPT1 through LPT3 are local parallel ports.  COM1 through COM4 are local serial ports.  
LPT1 would be chosen if the ARPB2 was connected directly to this workstation with a 
parallel cable. 
 
 
Sharp Electronics (UK) Ltd., NIS Systems Support 
 
NIS Bulletin 020a.doc 
 
Page:  3 of 17 
 
 
 
 
7. 
Select Create a new port and in the Type field, select the option for Standard TCP/IP 
Port.  
Click Next. 
 
 
 
 
 
 
Sharp Electronics (UK) Ltd., NIS Systems Support 
 
NIS Bulletin 020a.doc 
 
Page:  4 of 17 
8. 
Make sure that the Sharp copier is powered on and connected to the network.  Click 
Next 
 
 
 
 
9. 
Use the following steps to check / set an IP address and subnet address on the 
ARNC1D/3D network interface card. 
   
With the AR-PB2/+ and the ARNC1D/3D installed in the copier, press the following 
keys on the copiers operation panel, in the order shown. 
 
PRINT -> OFFLINE-> MENU-> NETWORK-> SETTING->  IP ADDRESS SETTING 
 
 
 
Use the keypad to enter the four octets in the IP address and Subnet Mask. A 
Gateway addresses may also be required in a larger scale network.  Hit OK three 
times when done to return to the main menu. 
 
Page of 18
Display

Sharp AR-NC1D (serv.man10) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp AR-NC1D (serv.man10) Service Manual ↓ Size: 809.1 KB | Pages: 18 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp AR-NC1D (serv.man10) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AR-NC1D (serv.man10) Copying Equipment. Information contained in Sharp AR-NC1D (serv.man10) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.