AR-M550 (serv.man19). (12) Other — Sharp Copying Equipment Service Manual (repair manual)

Model
AR-M550 (serv.man19)
Pages
8
Size
589.03 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / (12) Other
File
ar-m550-sm19.pdf
Date

View Sharp AR-M550 (serv.man19) Service Manual online

AR-M550/M620  OTHER  12 - 1
[12] OTHER
[VARIOUS COUNTERS SPECIFICATIONS]
1. Count specification
A. Paper exit system counter
Large size: A3, 11 x 17. (Greater size than paper length 384mm)
( ): Count-up number when setting to the large size single count up.
B. Document, finishing, paper feed system counter
Counter
Count-up timing
Count-up number
Counter 
reset 
procedure, 
clear
Simplex copy
Duplex copy
Paper feed tray – Main 
unit paper exit
Paper feed tray – ADU
ADU – Main unit paper 
exit
Small size Large size Small size Large size Small size Large size
Total counter (Note)
When transfer is completed
1
2 (1)
1
2 (1)
1
2 (1)
Maintenance counter
When transfer is completed
1
2 (1)
1
2 (1)
1
2 (1)
Sim24-4
Developer counter
When transfer is completed
1
2 (1)
1
2 (1)
1
2 (1)
Sim24-5
All valid paper counter (Note)
When paper exit
1
2 (1)
2
4  (2)
Copy counter (Copy valid paper) When paper exit
1
2 (1)
2
4 (2)
Sim24-6
FAX counter
When paper exit
1
2 (1)
2
4 (2)
Sim24-10
Print counter
When paper exit
1
2 (1)
2
4 (2)
Sim24-9
Internet FAX counter
When paper exit
1
2 (1)
2
4 (2)
Sim24-15
Document filing counter
When paper exit
1
2 (1)
2
4 (2)
Sim24-15
Right side paper exit counter
When center  paper exit
1
2 (1)
2
4  (2)
Other counter (Self print, etc.)
When paper exit
1
2 (1)
2
4 (2)
Sim24-9
Counter
Mode
Count event
Count-up condition
Counter reset 
procedure, 
clear
SPF counter
All modes
SPF paper 
feed number
Count is made when starting SPF paper pick.
Sim24-3
Finish stamp counter
FAX send
Internet FAX send
Finish stamp 
use number
Count is made when stamp is ON.
Sim24-3
Staple counter
All modes
(Including inserter 
stand alone process)
Staple 
number
Count is made when bundle exit process is completed.
Double count is made when stapling two positions.
In the inserter stand alone mode, count is made when process is 
completed.
Sim24-3
Punch counter
All modes
(Including inserter 
stand alone process)
Punch 
number
Count is made when bundle exit process is completed.
1 count regardless of the kind of the punch unit (2-hole, 3-hole, etc.)
In the inserter stand alone mode, count is made when process is 
completed.
Sim24-3
Saddle staple counter
All modes
(Including inserter 
stand alone process)
Saddle 
staple 
number
Count is made when bundle paper exit process is c completed.
Only one count is added.
In the inserter stand alone mode, count is made when process is 
completed.
Sim24-3
Scan total counter
All modes
Scan 
number
Count is made when scan is completed.
Sim24-3
ADU counter
All modes
ADU paper 
feed number
Count is made when paper feed from the ADU section is started.
Sim24-2
Inserter counter
All modes
(Including inserter 
offline process)
Inserter tray 
paper feed 
number
Count is made when paper feed from the inserter tray is started.
In the inserter stand alone mode, count is made when process is 
completed.
Sim24-3
Paper 
feed 
counter
Manual paper 
feed tray
All modes
Tray paper 
feed number
Count is made when paper feed from each tray is started.
Sim24-2
Paper feed tray 1
Sim24-2
Paper feed tray 2
Sim24-2
Paper feed tray 3
Sim24-2
Paper feed tray 4
Sim24-2
LCC
Sim24-2
AR-M550/M620  OTHER  12 - 2
C. Send system counter
Counter
Mode
Count event
Count-up condition
Counter reset 
procedure, 
clear
Accumulated 
number of FAX 
send
G3 FAX send
Number of send
Except for the serial transmit operation, one reservation is counted as 
one communication.
For the serial transmit operation, count is made for each 
communication individually.
Recall is not included.
Polling is counted as a number of send.
Sim24-10
Accumulated 
page number of 
FAX send
G3 FAX send
Total page number of 
send
In the serial transmit operation, each communication is counted as one 
individually.
In bulletin board send, the page number of send is counted.
Sim24-10
Accumulated 
time of FAX send
G3 FAX send
Send time
(Including resending 
time.)
Sim24-10
Accumulated 
page number of 
scanner scan
Scan to E-mail send
SHARP DESK send
FTP send
Page number of scan Even in the serial transmit operation, the page number of one scan is 
counted.
(The number of receivers is not counted.)
In case of a send error (excluding document jam)
• E-mail 
 Not counted.
• SHARP DESK/FTP 
 Counted.
Sim24-15
Accumulated 
number of mail 
send
Scan to E-mail send Number of mails 
reached to 
destination servers
Even in the serial transmit operation, the page number of one scan is 
counted.
(The number of receivers is not counted.)
Cancel and network error are not counted.
Sim24-15
Accumulated 
number of FTP 
send
SHARP DESK send
FTP send
Number of send 
reached to 
destination servers
Mails transmitted by FTP send are counted in the accumulated 
number of mail send.
Even in the serial transmit operation, the page number of one scan is 
counted.
(The number of receivers is not counted.)
Cancel and network error are also counted.
Sim24-15
Accumulated 
number of 
internet FAX 
send
Internet FAX send
Page number of send Even in the serial transmit operation, the page number of one scan is 
counted.
(The number of receivers is not counted.)
The final send result is counted.
A send error is counted.
Resend is not counted.
Cancel and CE error are not counted.
Sim24-15
Accumulated 
number of 
internet FAX 
receive
Internet FAX send
Page number of scan Even in the serial transmit operation, the page number of one scan is 
counted.
(The number of receivers is not counted.)
The final send result is counted.
A communication error (except for document jam) is counted.
Cancel and CE error are not counted.
A send (transfer, F code relay broadcast) without document scan is not 
counted.
Sim24-15
Scanner trial 
counter
Internet FAX send
Scan to E-mail send
SHARP DESK send
FTP send
Page number of scan Count is made for every scan of page.
Count is made even when send is not completed.
The operation is terminated when the count number exceeds 500.
Page number of 
Scan to HDD
When reading 
SCAN TO HDD
HDD storage page 
number
Sim24-15
AR-M550/M620  OTHER  12 - 3
D. Receive system counter
E. Department counter
F. Printer job count-up specification
* When there is “NO” in account administration, or when there is not “NO.”
Counter
Mode
Count event
Count-up condition
Counter reset 
procedure, 
clear
The accumulated 
page number of 
FAX receive print
G3 FAX 
receive
Total output 
page number
The FAX separator sheet is also counted.
When polling, the number of received pages is counted.
Count by size and count in recovery are the same as the copier specifications. 
(Counted by the print system.)
Sim24-10
Accumulated time 
of FAX receive
G3 FAX 
receive
Receive time
Sim24-10
Accumulated 
number of internet 
FAX receive
Internet 
FAX receive
Receive 
number
A normal mail receive is also counted.
Count is made regardless of normal or abnormal.
Count is made regardless of print result.
Sim24-15
Accumulated page 
number of internet 
FAX receive print
Internet 
FAX receive
Total receive 
output number
Count is made when output is made on a normal mail receive.
Print of mail text is not counted.
The FAX separator sheet is also counted.
Count by size and count in recovery are the same as the copier specifications. 
(Counted by the print system.)
Sim24-15
Operation content
Data location
Conforming count mode 
(SIM 26-5)
Count-up condition
MFP 
Control 
PWB
FAX
Scanner 
control 
PWB
PCU 
PWB
TOTAL
Mainte-
nance
DV
Copy counter
Print counter
FAX send page 
number counter
Department FAX send page number
• In the serial transmit operation, each communication is
counted as one individually.
Network scanner 
counter
Department network scanner scan page number
• iFAX and network scanner
• Even in the serial transmit operation, the page number of
one scan is counted. (The number of receivers is not
counted.)
I-FAX send page 
number counter
Department FAX send page number
• In the serial transmit operation, each communication is
counted as one individually.
Document filing
Total use page number 
counter
Department counter
PRINTS
OTHERS
Key operation 
number
Driver specification 
account number
Other department 
(OTHERS)
Printer job (Without account administration)
Printer job (With account specification) *
Printer job (Without account specification) *
Notice in printer job (Without account administration)
Notice in printer job (With account specification) *
Notice in printer job (Without account specification) *
List print
Total use page number print
Each department total page number print
Engine self print
AR-M550/M620  OTHER  12 - 4
G. Total counter specifications
The total count viewed from the user and the counter used for charging are “Total output counter (total valid paper counter).”
H. Blank paper count specification
Large size: A3, 11 x 17. (Greater size than paper length 384mm)
*1: Follows SIM 26-5 (Count-up mode). (Default: Double count-up (Set value: 2))
(  ): Large size single count-up setting (Count-up number when set to 1.)
: Counts up.
: Does not count up.
:
Follows SIM 26-52 setting.
0: Does not count up. (Japan/SCA default)
1: Counts up. (Other default)
—: Out of target (No print process)
I. Consumables counter specification
Total output counter (Total valid paper counter)
Total counter
Display when the copy key is ON.
List print
Valid paper counter to send to serial RIC
Total counter to send to serial RIC
E-RIC mail text counter
E-RIC attached file
(Counter for the first send)
(Counter to send in the midst of packet)
SIMULATION
Displayed/printed as Total output.
Displayed/printed as Total
Mode
Print mode
Count attribute
Blank paper count setting (SIM 26-52)
Remark
Print  surface
0: NO
1: YES
Front 
surface
Back 
surface
Small 
size
Large 
size
Small 
size
Large 
size
Normal Without print (Invalid paper exit)
0
0
0
0
Without print (Blank paper 
insertion)
0
0
1
2 (1) *1
Single face print (Single face mode)
1
2 (1) *1
1
2 (1) *1
SS/DS
Single face print (Duplex mode)
1
2 (1) *1
1
2 (1) *1
SD (Odd number of documents)
Duplex print
2
4 (2) *1
2
4 (2) *1
SD (Even number of documents)/
DD
Front 
cover
Without print
0
0
1
2 (1) *1
With print (Single face)
1
2 (1) *1
1
2 (1) *1
With print (Duplex)
2
4 (2) *1
2
4 (2) *1
Back 
cover
Without print
0
0
1
2 (1) *1
With print (Single face)
1
2 (1) *1
1
2 (1) *1
With print (Duplex)
2
4 (2) *1
2
4 (2) *1
Insert 
paper
Without print
0
0
1
2 (1) *1
With print (Single face)
1
2 (1) *1
1
2 (1) *1
With print (Duplex)
2
4 (2) *1
2
4 (2) *1
OHP 
insert 
paper
Without print
0
0
1
2 (1) *1
With print (Single face)
1
2 (1) *1
1
2 (1) *1
With print (Duplex)
Duplex print inhibition
Counter
Count-up timing
Count-up number
Counter 
reset 
procedure, 
clear
Simplex print
Duplex print
Paper feed tray – 
Main unit paper exit
Paper feed tray – 
ADU
ADU – Main unit 
paper exit
Small size Large size Small size Large size Small size Large size
OPC drum counter
When transfer is completed
1
2 (1)
1
2 (1)
1
2 (1)
Sim24-7
OPC drum rotation counter (sec)
When transfer is completed
Sim24-11
Developer counter
When transfer is completed
1
2 (1)
1
2 (1)
1
2 (1)
Sim24-5
Developing roller rotation counter 
(sec)
When transfer is completed
Sim24-11
Toner counter
When transfer is completed
1
2 (1)
1
2 (1)
1
2 (1)
Toner supply counter (sec)
When transfer is completed
Page of 8
Display

Download Sharp AR-M550 (serv.man19) Service Manual (Repair Manual)

Here you can view online or download Sharp AR-M550 (serv.man19) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sharp AR-M550 (serv.man19) Copying Equipment. Information contained in Sharp AR-M550 (serv.man19) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).