DOWNLOAD Sharp AR-M550 (serv.man19) Service Manual ↓ Size: 589.03 KB | Pages: 8 in PDF or view online for FREE

Model
AR-M550 (serv.man19)
Pages
8
Size
589.03 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / (12) Other
File
ar-m550-sm19.pdf
Date

Sharp AR-M550 (serv.man19) Service Manual ▷ View online

AR-M550/M620  OTHER  12 - 5
J. Reset and set for suplly counters
2. Location and display of each counter data
Work item
Test Command
Reset item
Included Test Command
Setting the toner concentration control level
Sim25-2
Developer counter
Sim24-5
DV unit running time counter (sec)
Sim24-11
Reset the OPC drum counter
Sim24-7
OPC drum counter
Reset the Developer counter
Sim24-5
Developer counter
Reset the OPC drum running time counter (sec)
Sim24-11
OPC drum running time counter (sec)
Reset the DV running time counter (sec)
Sim24-11
DV running time counter (sec)
Simulation 
Code
Operation content
Data 
size
Data location
Conforming count mode 
(SIM 26-5)
Count-up condition
Main Sub
MFP 
control 
PWB
FAX
Scanner 
control 
PWB
PCU 
PWB
TOTAL
Mainte-
nance
DV
22
01
Each counter display (Total/ Mainte-
nance/ Developer/ SPF/ Staple/ Tray)
1:
Total counter
2:
Drum cartridge counter
3:
Toner cartridge counter
4:
Deve cartridge counter
5:
Maintenance counter
6:
Total output page number counter
7:
Copy counter
8:
Printer counter
9:
FAX output counter
10: I-FAX output counter
11: Document filing output counter
12: Right side output counter
Count is made when the main unit paper exit is started. (When POP2
is ON)
13: Other print counter
Refer to the “Count Specifications.”
02
Jam/ Trouble counter display
1:
Paper jam
Count is made when an event occurs. (A jam by closing the door dur-
ing paper transport is not counted.)
2:
SPF jam
Count is made when an event occurs. (A jam by closing the door dur-
ing paper transport is not counted.)
3:
Trouble
Count is made when an event occurs. (Follows the trouble count
method of SIM 26-35.)
08
Document, staple counter display
1:
SPF document feed page number
One count is made every time when SPF document is paper feed.
2:
Scan number
One count is made every time when scan is completed.
3:
Staple number
One count for every stapling (Stapling at two positions is counted as
2.)
4:
Punch number
One count for every punching
5:
SPF finish stamp number
One count when stamp is started.
6:
Saddle staple number
One count for every saddle stapling
7:
Inserter number
One count for every paper pick-up
09
Paper feed counter display
1:
Paper feed tray 1 (Tandem Left)
One count for every paper pick-up
2:
Paper feed tray 2 (Tandem Right)
One count for every paper pick-up
3:
Paper feed tray 3
One count for every paper pick-up
4:
Paper feed tray 4
One count for every paper pick-up
5:
MFT (Manual paper feed tray)
One count for every paper pick-up
6:
ADU
One count for every paper transport start from ADU.
7:
LCC
One count for every paper pick-up
11
FAX send/receive counter display
1:
FAX send (Send counter)
32bit
Accumulated page number of send
• Except for the serial transmit operation, one reservation is counted
as one communication.
• For the serial transmit operation, count is made for each communi-
cation individually.
• Recall is not included.
• Saved in the FAX-SRAM.
2:
FAX receive (Receive counter)
32bit
Accumulated number
• Count is made regardless of normal or abnormal completion.
• Saved in the 32bit counter and the FAX-SRAM.
3:
FAX output (FAX print counter)
32bit
The accumulated page number of FAX receive print
Count by size and count in recovery are the same as the copier spec-
ifications.
• Counted by the print system.
Refer to the “Count Specifications.”
4:
FAX send images (Send page
number)
32bit
Accumulated page number of send
• In the serial transmit operation, each communication is counted as
one individually.
• Saved in the 32bit counter and the FAX-SRAM.
5:
Send time (Send time)
48bit
hhhhhhhh:mm:ss
Saved in the FAX-SRAM.
6:
Receive time (Receive time)
48bit
hhhhhhhh:mm:ss
Saved in the FAX-SRAM.
AR-M550/M620  OTHER  12 - 6
22
13
Process section count data display
1:
Drum cartridge counter
Refer to the “Count Specifications.” (Same as the maintenance
counter.)
2:
Drum rotating time
Count for every second of rotation
3:
Toner cartridge counter
Refer to the “Count Specifications.” (Same as the developer
counter.)
4:
Toner supply time
Count for every second of rotation
5:
Developer cartridge counter
Refer to the “Count Specifications.” (Same as the developer
counter.)
6:
Developer rotating time
Count for every second of rotation
19
Display of counters related to the net-
work scanner
1:
Network scanner document scan
page number counter
32bit
Accumulated page number of scanner scan
• The page number of normal completion of iFAX, E-mail, and FTP
(DESK) send.
• In sequential broadcast, count is made when one destination send
is normally completed.
• In case of a communication error: (Except for document jam)
For iFAX and E-mail, send is canceled and no page is sent. There-
fore count is not made.
For FTP (DESK), though send is canceled, data reached in the
server remains, and only the page number of send is counted.
• Saved in the FAX-SRAM.
2:
Mail send counter
32bit
Accumulated number of mail send
• The number of send mails of iFAX, E-mail, and FTP is counted.
• Even in the serial system, one scan is counted. (The number of
receivers is not counted.)
• The number of mails reached to the server is counted.
• Since server data are deleted in case of send cancel or a network
error, count is not made.
• Saved in the FAX-SRAM.
3:
FTP send counter
32bit
Accumulated number of FTP send
• The page number of FTP (DESK) send is counted.
• The FTP send mails are counted by the MAIL send counter.
• Even in the serial transmit operation, the page number of one scan
is counted. (The number of receivers is not counted.)
• The number of mails reached to the server is counted.
• In case of send cancel or a network error, the server data cannot
be deleted. Therefore, count is made.
• Saved in the FAX-SRAM.
4:
I-FAX original (Scan page number
counter)
32bit
Accumulated page number of internet FAX scan
• A communication error (except for document jam) is counted.
• Cancel and CE error are not counted.
• A send (transfer, F code relay broadcast) without document scan is
not counted.
• Saved in the FAX-SRAM.
5:
I-FAX send (Send counter)
32bit
Accumulated number of internet FAX send
• A send error is counted.
• Resend is not counted.
• Cancel and CE error are not counted.
• Saved in the 32bit counter and the FAX-SRAM.
6:
I-FAX receive (Receive counter)
32bit
Accumulated number of internet FAX send
• A normal mail receive is also counted.
• Saved in the 32bit counter and the FAX-SRAM.
7:
I-FAX output (Print page number
counter)
32bit
Accumulated page number of internet FAX receive print
Count by size and count in reprint after a jam are the same as the
copier specifications.
8:
SCAN TO HDD (Save page num-
ber counter)
32bit
Page number of SCAN TO HDD save
• The page number of documents saved to HDD is counted.
Simulation 
Code
Operation content
Data 
size
Data location
Conforming count mode 
(SIM 26-5)
Count-up condition
Main Sub
MFP 
control 
PWB
FAX
Scanner 
control 
PWB
PCU 
PWB
TOTAL
Mainte-
nance
DV
AR-M550/M620  OTHER  12 - 7
3. Web setting service mode
A. Outline
The Web setting service mode provides the following functions:
• Font/Form Download
• Device Cloning
These functions are used to backup the user data and the key operator
program setting data, and to import backup data to another machine.
By using these functions, two or more machines can be set in the
same conditions in a short time.
• i-Fax Setup
This function is used to backup i-Fax receive data to the FTP server.
By using this function, receive data are backed up to the FTP server
when they cannot be printed by some reasons (paper empty, toner
empty, paper jam, etc.) and can be printed out after recovery of the
machine.
After completion of printing the backup data, they are deleted from the
FTP server. 
B. Operating procedures
Entering the Web setting mode
1) Boot the browser software.
2) Enter "xxx.xxx.xxx.xxx(IP address)/xxxx_xxxxx.html" and press
ENTER key.
3) Enter the user name and the password, and press OK button.
Note: The default user name and the default password are as follows:
User name: service
Password: shArp
The password can be optionally changed in the following procedures:
1) Enter "xxx.xxx.xxx.xxx(IP address)/password_setting.html" and
press ENTER key.
2) Enter a new password.
3) Enter the new password again in the check column.
4) Press SUBMIT button.
C. Details
(1) Font / Form Download
(Font download)
1) Press "xxx.xxx.xxx.xxx(IP address)/font_down.html" and press
ENTER key.
2) Enter the user name and the password, and press OK button.
3) Select "Download" menu.
4) Select Resourced type.
5) Select Storage Device.
6) Select Font file. 
7) Press "Download" button.
(Check or delete of downloaded font)
1) Press "xxx.xxx.xxx.xxx(IP address)/font_down.html" and press
ENTER key.
2) Enter the user name and the password, and press OK button. 
3) Select Management menu.
The list of downloaded fonts and the used percentage of the font area
in the memory device are displayed.
Press "Initialize" button and press Yes key, and the downloaded fonts
will be deleted.
(2) Device Cloning
(Backup)
1) Press "xxx.xxx.xxx.xxx(IP address)/device_cloning.html" and
press ENTER key.
2) Enter the user name and the password, and press OK button.
3) Select an item to be backed up. (Application / Key operator setting)
4) Press Execute key.
5) Press Save button. (File download mode)
6) Select the destination of save.
7) Press Save button.
AR-M550/M620  OTHER  12 - 8
(Import)
1) Press "xxx.xxx.xxx.xxx(IP address)/device_cloning.html" and
press ENTER key.
2) Enter the user name and the password, and press OK button.
3) Select the backed up file (xxxx.bin).
4) Press Execute key.
(3) i-Fax Setup
1) Press "xxx.xxx.xxx.xxx(IP address)/ifax_ftp.html" and press
ENTER key.
2) Enter the user name and the password, and press OK button.
3) Enter the FTP server address to which i-Fax receive data are
backed up. 
4) Enter the directory.
5) Enter the user name
6) Enter the password.
7) Press Submit button.
Page of 8
Display

Sharp AR-M550 (serv.man19) Service Manual ▷ Download