Sharp AR-M351N / AR-M451N (serv.man10) User Manual / Operation Manual ▷ View online
LOADING PAPER
2-5
2
Setting the paper type and paper size
Follow these steps to change the paper type setting if the paper type is changed in either paper tray. For the paper
types that can be used in each tray, see page 2-3.
types that can be used in each tray, see page 2-3.
1
Press the [CUSTOM SETTINGS] key.
The custom setting
menu screen will
appear.
menu screen will
appear.
2
Touch the [PAPER TRAY SETTINGS] key.
The paper tray selection
screen will appear.
screen will appear.
3
Touch the [TRAY SETTINGS] key.
4
Display the setting screen of the desired
paper tray.
paper tray.
Touch the
key or
key to display the
setting screen of the desired paper tray.
5
Touch the [TYPE / SIZE] key.
6
Select the type of paper that was loaded in
the tray.
the tray.
Example: The paper type of tray 2 is selected
Touch the desired paper type to select it. The
paper size setting screen will appear.
paper size setting screen will appear.
■
■
■
■ User type
Set a user type when a paper type is not available
as an option. To select a user type, touch the
key in the screen of step 6 to display the user type
selection screen. To store or edit a user type name
or set tray attributes, see "Programming and
editing paper types" on page 2-7.
as an option. To select a user type, touch the
key in the screen of step 6 to display the user type
selection screen. To store or edit a user type name
or set tray attributes, see "Programming and
editing paper types" on page 2-7.
NOTE
To automatically switch to a tray with the same size
and type of paper (if there is one) in the event that the
paper tray runs out of paper, display the last screen
with the
and type of paper (if there is one) in the event that the
paper tray runs out of paper, display the last screen
with the
key and select [AUTO TRAY
SWITCHING].
PAPER TRAY
SETTINGS
TA
ORWARD
RINT
PRINTER
CONDITION
TRAY SETTINGS
PAPER TRAY SETTINGS
CUSTOM SETTINGS
1/4
PLAIN / A4
OK
PRINT
PAPER TRAY SETTINGS
TYPE / SIZE
CUSTOM SETTINGS
TRAY 1
FAX
I-FAX
COPY
DOC.
FILING
FIXED PAPER SIDE
DISABLE DUPLEX
DISABLE STAPLE
DISABLE PUNCH
NOTE
Heavy paper, label sheets and transparency film
cannot be used in trays 1, 3, and 4. Envelopes can
only be placed in tray 2.
cannot be used in trays 1, 3, and 4. Envelopes can
only be placed in tray 2.
TYPE / SIZE
TRAY 2
PER TRAY SETTINGS
PRINT
COPY
I-FAX
DOC.
FILING
FAX
PLAIN / A4
CANCEL
1/2
PLAIN
RECYCLED
PRE-PRINTED
PRE-PUNCHED
LETTER HEAD
COLOUR
HEAVY PAPER
ENVELOPE
LABELS
TRANSPARENCY
TRAY 2 TYPE/SIZE SETTING
SELECT THE PAPER TYPE.
CUSTOM SETTINGS
1/2
CUSTOM SETTINGS
TRAY 2 TYPE/SIZE SETTING
2/2
USER TYPE 1
USER TYPE 5
USER TYPE 6
USER TYPE 7
USER TYPE 2
USER TYPE 3
USER TYPE 4
CANCEL
SELECT THE PAPER TYPE
1/2
Copy_EX.book 5 ページ ２００４年９月２８日 火曜日 午後９時５４分
LOADING PAPER
2-6
7
Select the size of paper that was loaded in
the tray.
the tray.
Touch the appropriate keys (checkboxes).
8
Touch the [OK] key in the size setting
screen.
screen.
You will return to the tray setting screen of step 4.
9
Select output functions that can be used
with the selected tray.
with the selected tray.
Touch the checkboxes
under the desired items
to select them.
Checkboxes that can be
selected will vary
depending on the options
that are installed.
under the desired items
to select them.
Checkboxes that can be
selected will vary
depending on the options
that are installed.
10
Configure paper settings for each tray and
then touch the [OK] key to exit.
then touch the [OK] key to exit.
Setting the paper size when a special size is loaded
Tray 2 and the bypass tray
1
Perform steps 1 through 6 of "Setting the
paper type and paper size" (see page 2-5).
paper type and paper size" (see page 2-5).
2
Touch the [SIZE INPUT] key and then
touch the [AB] tab.
touch the [AB] tab.
The size entry palette
appears.
appears.
3
Touch the
key or the
key to enter
the X (width) and Y (length) dimensions of
the paper.
the paper.
Entry of the X dimension
(width) is initially
selected. Touch the [Y]
key and enter the Y
dimension (length) in the
same way as the X
dimension.
(width) is initially
selected. Touch the [Y]
key and enter the Y
dimension (length) in the
same way as the X
dimension.
4
Touch the [OK] key.
You will return to the size
setting screen of step 2.
setting screen of step 2.
5
If the paper is a non-standard size, select
the [NON STANDARD SIZE] checkbox.
the [NON STANDARD SIZE] checkbox.
6
Perform steps 8 through 10 of "Setting the
paper type and paper size" (see page 2-6).
paper type and paper size" (see page 2-6).
[AUTO-INCH] key
: Select when you have loaded
an inch-based size of paper.
[AUTO-AB]
key
: Select when you have
loaded an AB size of paper.
[SIZE INPUT] key : Select to directly enter a
paper size (see page 2-6).
[NON STANDARD
SIZE] checkbox
SIZE] checkbox
: Select when you have
loaded a non-standard size
of paper (see page 2-6).
of paper (see page 2-6).
[POST] key
: Select this when you have
loaded postcards.
NOTE
Sizes that can be selected vary depending on the
selected paper type.
selected paper type.
11X17,8 X14,8 X11
8 X11R,7 X10 ,5 X8 R
8 X11R,7 X10 ,5 X8 R
1
/
2
1
/
2
1
/
2
1
/
2
1
/
4
1
/
2
1
/
2
A3,A4,A4R,A5R,B4,B5
B5R,216X330(8 X13)
B5R,216X330(8 X13)
1
/
2
TYPE
OK
PLAIN
TRAY 2 TYPE/SIZE SETTING
CUSTOM SETTINGS
TYPE
AUTO-INCH
SIZE INPUT
AUTO-AB
SIZE
X17 Y11
NON STANDARD
SIZE
SIZE
2/2
POST
NOTE
The type and size of paper loaded in the bypass tray
can also be set from the paper selection screen.
Touch the [PAPER SELECT] key at the top of the
base screen to display the paper selection screen,
touch the [PAPER SELECT] key for the bypass tray,
and then go to step 6.
can also be set from the paper selection screen.
Touch the [PAPER SELECT] key at the top of the
base screen to display the paper selection screen,
touch the [PAPER SELECT] key for the bypass tray,
and then go to step 6.
PRINT
COPY
FAX
I-FAX
DOC.
FILING
FILING
NOTE
Special sizes of paper cannot be loaded in trays 1, 3 and 4.
AB
Y
297
420
X
(148 432)
mm
INCH
OK
(100 297)
mm
Y
X
AB
Y
100
300
Y
X
INCH
OK
(148 432)
mm
(100 297)
mm
X
AB
Y
100
300
Y
X
INCH
OK
(148 432)
mm
(100 297)
mm
NON STANDARD
SIZE
11
X
17,8
X
14,8
X
11
1
/
2
1
/
2
8
X
11R,7
X
10 ,5
X
8 R
1
/
2
1
/
4
1
/
2
1
/
2
1
/
2
A3,A4,A4R,A5R,B4,B5
B5R,216x330(8 x13)
B5R,216x330(8 x13)
X17 Y11
5
/
8
1
/
2
02-1.fm 6 ページ ２００４年９月２８日 火曜日 午後１０時４３分
LOADING PAPER
2-7
2
Programming and editing paper types
To program or edit the name of a paper type or set paper attributes, follow the steps below.
1
Follow steps 1 and 2 of "Setting the paper
type and paper size"
type and paper size"
(page 2-5)
2
Touch the [PAPER TYPE REGISTRATION]
key.
key.
3
Select the paper type that you wish to
program or edit.
program or edit.
4
Touch the [TYPE NAME] key.
A character entry screen
appears.
Enter a type name
(maximum of 14
characters). (See page
7-26 to enter characters.)
appears.
Enter a type name
(maximum of 14
characters). (See page
7-26 to enter characters.)
5
Set the attributes of the paper tray.
Touch the checkboxes
to the left of the items to
select them.
to the left of the items to
select them.
6
Touch the [EXIT] key to exit the
programming/editing procedure.
programming/editing procedure.
OK
PAPER TYPE REGISTRATION
CUSTOM SETTINGS
TRAY 2 TYPE/SIZE SETTING
USER TYPE 1
USER TYPE 5
USER TYPE 6
USE
USER TYPE 2
USE
SELECT THE PAPER TYPE
FIXED PAPER SIDE
TYPE NAME
PAPER TYPE REGISTRATION
No.01
USER TYPE 1
DISABLE STAPLE
DISAB
DISAB
FIXED PAPER SIDE
TYPE NAME
PAPER TYPE REGISTRATION
No.01
USER TYPE 1
DISABLE STAPLE
DISAB
DISAB
"FIXED PAPER SIDE" : Select when paper is to be
loaded print side down in the
tray. Make sure a checkmark
does not appear when paper is
to be loaded print side up.
tray. Make sure a checkmark
does not appear when paper is
to be loaded print side up.
• If the two-sided function is
prohibited in "DISABLING OF
DUPLEX" in the key operator
programs (page 11 of the Key
operator’s guide), do not use
this setting.
DUPLEX" in the key operator
programs (page 11 of the Key
operator’s guide), do not use
this setting.
"DISABLE DUPLEX" : Prohibits two-sided printing.
Enable when the back side of
the paper cannot be printed on.
the paper cannot be printed on.
"DISABLE STAPLE" : Prohibits stapling. Enable
when using special papers
such as transparency film and
label sheets.
such as transparency film and
label sheets.
"DISABLE
PUNCH" : Prohibits punching. Enable
when using special papers
such as transparency film and
label sheets.
such as transparency film and
label sheets.
NOTE
"FIXED PAPER SIDE" and "DISABLE DUPLEX"
cannot be simultaneously enabled.
cannot be simultaneously enabled.
DISABLE DUPLEX
DISABLE PUNCH
EXIT
CANCEL
Copy_EX.book 7 ページ ２００４年９月２８日 火曜日 午後９時５４分
LOADING PAPER
2-8
Loading paper in the multi purpose drawer
The method of loading paper into the multipurpose drawer is the same as for paper tray 1 described on page 2-2.
For specifications of paper, see page 2-3. When loading envelopes, postcards or transparency film, follow the
descriptions below.
● Two maximum height lines are indicated: one for plain paper and one for special paper.
For specifications of paper, see page 2-3. When loading envelopes, postcards or transparency film, follow the
descriptions below.
● Two maximum height lines are indicated: one for plain paper and one for special paper.
■
■
■
■ How to change the paper size
To change the paper size or paper type when paper is loaded into the multi purpose drawer, refer to page
2-5
for
details.
■
■
■
■ Setting envelopes or postcards
When setting envelopes or postcards in the multi purpose drawer, set them in the orientation shown below.
Loading postcards
Load postcards print side up to the rear left of the tray
as shown.
as shown.
Loading envelopes
Envelopes can only be printed on the address side. Be
sure to place envelopes with the address side up and
the top of the envelope to the rear.
sure to place envelopes with the address side up and
the top of the envelope to the rear.
Printing onto envelopes or postcards
● Attempting to print onto both sides of envelopes or postcards may result in misfeeds or poor prints.
● Do not use paper that has already been printed on by a thermal transfer or inkjet printer. In particular, paper
● Do not use paper that has already been printed on by a thermal transfer or inkjet printer. In particular, paper
that has been printed on by a thermal transfer printer (such as a word processor that uses a cassette) may
cause missing characters and smudges.
cause missing characters and smudges.
● To avoid wrinkling, misfeeds or poor printing, make sure the postcard or envelopes stock is not curled.
Maximum height line for plain paper
Do not exceed this line when loading plain paper.
Do not exceed this line when loading plain paper.
Maximum height line special paper (red line)
Do not exceed this line when loading special paper.
Do not exceed this line when loading special paper.
Copy_EX.book 8 ページ ２００４年９月２８日 火曜日 午後９時５４分
Click on the first or last page to see other AR-M351N / AR-M451N (serv.man10) service manuals if exist.