DOWNLOAD Sharp AR-M351N / AR-M451N (serv.man10) Service Manual ↓ Size: 9.1 MB | Pages: 127 in PDF or view online for FREE

Model
AR-M351N AR-M451N (serv.man10)
Pages
127
Size
9.1 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / Operation Manual (for General Information and Copier Operation).
File
ar-m351n-ar-m451n-sm10.pdf
Date

Sharp AR-M351N / AR-M451N (serv.man10) User Manual / Operation Manual ▷ View online

CUSTOM SETTINGS
2-13
2
5
Touch the [DATE FORMAT] key.
The following screen appears.
6
If you wish to change the format of the date
and time, touch the desired format keys.
Touched keys are highlighted.
The selected format is applied to lists printed out in
"LIST PRINT".
7
Touch the [OK] key.
You will return  to the
date and time setting
screen.
8
Touch the [OK] key.
9
To exit the settings, touch the [EXIT] key.
CUSTOM SETTINGS
DATE FORMAT
YYYY/MM/DD
MM/DD/YYYY
DAY-NAME
POSITION
OK
FIRST
12-HOUR
24-HOUR
LAST
2004/10/20/MON 14:27
DD/MM/YYYY
ME
ON
OK
T
12-HOUR
CUSTOM SETTINGS
LIST PRINT
FAX DATA
RECEIVE/FORWARD
PAPER TRAY
SETTINGS
EXIT
DEFAULT
SETTINGS
SENDER CONTROL
KEY OPERATOR PROGRAMS
ADDRESS CONTROL
TOTAL COUNT
DOCUMENT FILING
CONTROL
PRINTER 
CONDITION 
More information on setting procedures
In the following type of screen, a setting is selected
by touching the key so that a checkmark (
)
appears. The settings below are configured to
allow use of tray 1 in print, copy, and fax modes. To
display the next screen, touch the 
 or 
 keys.
FAX
COPY
PRINT
TRAY1
TYPE / SIZE
CUSTOM SETTINGS
PAPER TRAY SETTINGS
PLAIN / A4
FIXED PAPER SIDE
1/4
OK
DOC. 
FILING
I-FAX
DISABLE DUPLEX
DISABLE STAPLE
DISABLE PUNCH
Copy_EX.book  13 ページ  2004年9月28日 火曜日 午後9時54分
CUSTOM SETTINGS
2-14
About the settings
■ Total count
This displays the following sheet counts (the
counts that can be displayed vary depending on
the options installed):
(1) Number of pages output by the machine.
(2) Number of original pages transmitted by the
machine.
(3) Number of times the automatic document
feeder was used to feed original pages and
number of times the stapler was used (if
installed).
(4) Number of pages stored by document filing.
In the case of (1) only,
●A3 (11" x 17") size paper is counted as two
sheets.
●Each sheet of paper used for automatic two-
sided copying is counted as two sheets (A3 (11"
x 17") paper is counted as four sheets). 
●Paper with an entered size of 384 mm (15-1/8")
or larger is counted as two sheets (four sheets
during automatic two-sided copying).
■ Default settings
The following settings can be configured:
●Display contrast
Screen contrast adjustment is used to make the
LCD touch panel easier to view under various
lighting conditions. Touch the [LIGHTER] key to
make the screen lighter, or the [DARKER] key
to make the screen darker.
●Clock
Use this to set the date and time in the
machine's built-in clock. This clock is used by
functions that require date and time information.
●Keyboard select
The layout of the keyboard that appears in letter
entry screens can be changed.
Select the arrangement of the letter keys that
you find easiest to use.
The following three alphabet keyboard
configurations are available:
● Keyboard 1 (QWERT... configuration)*
● Keyboard 2 (AZERTY...configuration)
● Keyboard 3 (ABCDEF...configuration)
* The default setting is "Keyboard  1".
(Example: Character entry screen when
Keyboard  3 is selected)
■ List print
This is used to print lists of machine settings and a
test page to check resident fonts.
The following lists and pages are available:
●All custom setting list
Shows the hardware status, software status,
printer configuration settings, tray settings, and
counts.
●Printer test page
Shows the PCL symbol set list, fonts, network
interface (NIC interface) settings, and settings
used for the NIC card.
●Sending address list
One touch destination list, group list, program
list, and memory box list.
●Document filing user / folder list
Shows the user names and folder names for
document filing.
●Sender control list
Shows the senders that have been stored.
■ Paper tray settings
The paper type, paper size, enabled modes and
automatic tray switching can set for each tray. See
page 2-5 to 2-for details on setting the paper type
and paper size. Automatic switching to another
paper tray is used to automatically switch to
another tray with the same size and type of paper
in the event that the paper runs out during
continuous printing. This requires that the trays be
loaded with the same size of paper. The paper tray
settings can be enabled or disabled for each tray,
and for printer mode, copy mode, fax mode,
Internet fax mode, and document filing mode. To
enable any function, touch the check box key so
that a checkmark (
) appears.
ABC
abc
NOTE
A test page cannot be printed if "PROHIBIT TEST
PAGE PRINTING" (See the "Operation manual (for
printer)".) has been set to "prohibited" in the key
operator programs.
Copy_EX.book  14 ページ  2004年9月28日 火曜日 午後9時54分
2-15
2
REPLACING THE TONER CARTRIDGE
When toner runs low, a message will appear to inform you that the toner cartridge must be replaced.
Follow the steps below to replace the toner cartridge.
1
Open the front cover.
2
Lower the cartridge lock lever.
3
While depressing the lock release button,
pull out the toner cartridge and remove it.
4
Remove a new toner cartridge from the
package and shake it horizontally five or
six times.
5
Insert a new toner cartridge.
Push the cartridge in
until it locks securely into
place.
6
Gently remove the sealing tape from the
cartridge.
Once the seal is pulled
out, the toner in the toner
cartridge is supplied to
the developer cartridge. 
7
Return the cartridge lock lever.
8
Close the front cover.
NOTE
To view the approximate amount of toner remaining, hold down the [COPY] key during printing or when the
machine is on standby. The percentage of toner remaining will appear in the display while you hold down the key.
When the percentage falls to "25-0%" , obtain a new toner cartridge and keep it ready for replacement.
NOTE
Shake the toner
cartridge well to
ensure that the toner
flows well and will not
stick to the inside of
the cartridge.
CAUTION
● Do not throw the toner cartridge into a fire. Toner may fly and cause burns.
● Store toner cartridges out of the reach of small children.
NOTE
Place the used toner cartridge in the plastic bag and store it. When placing the toner cartridge in the bag, insert it
horizontally, not vertically. If the cartridge is stood on end, the collected used toner may spill out and soil the floor
or your clothes.
Copy_EX.book  15 ページ  2004年9月28日 火曜日 午後9時54分
2-16
STORAGE OF SUPPLIES
Standard supplies for this product that can replaced by the user include paper, toner cartridges, and staple cartridges
for the finisher.
■ Proper storage
1. Store the supplies in a location that is:
● clean and dry,
● at a stable temperature,
● not exposed to direct sunlight.
2. Store paper in the wrapper and lying flat.
3. Paper stored in packages standing up or out of
the wrapper may curl or become damp, resulting
in paper misfeeds.
4. Store a new toner cartridge box horizontally. Do
not store it standing on end. If stored standing on
end, the toner may not distribute well even after
shaking the cartridge vigorously, and will remain
inside the cartridge without flowing out.
For best copying results, be sure to use only Sharp Genuine Supplies which are designed,
engineered, and tested to maximize the life and performance of Sharp products. Look for
the Genuine Supplies label on the toner package.
GENUINE SUPPLIES
Supply and Consumables 
The supply of spare parts for a repair of the appliance is guaranteed for at least 7 years following the termination
of production. Spare parts are those parts of the apparatus which may break down within the scope of the ordinary
use of the product - whereas those parts which normally exceed the life of the product are not to be considered
as spare parts. Consumables too, are available for 7 years following the termination of production.
Copy_EX.book  16 ページ  2004年9月28日 火曜日 午後9時54分
Page of 127
Display

Click on the first or last page to see other AR-M351N / AR-M451N (serv.man10) service manuals if exist.