Sharp AR-M276 (serv.man6) Service Manual ▷ View online
AR-M236/M276/M237/M277 SIMULATION 8 - 38
* The adjustment can be made in the range of -12.7% ~ +12.7% by
the increment of 0.1%.
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Select "1: COPY START."
The currently set value is displayed beside the item.
The currently set value is displayed beside the item.
2.
Press the [START] key.
Copying is started and the set value is stored.
Copying is started and the set value is stored.
There is no operation of tray selection.
The optimum paper tray for the scanned size is selected.
When two pages are scanned, duplex printing is made.
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Touch the item to be adjusted.
The item and the currently set value are highlighted.
The item and the currently set value are highlighted.
2.
Enter the adjustment value with the 10-key, and press the [START]
key.
The display is shifted to the copy menu.
key.
The display is shifted to the copy menu.
3.
Select the paper feed tray and the print density.
Enter the exposure level with the 10-key.
Enter the exposure level with the 10-key.
4.
Press the [START] key.
Copying is started.
Copying is started.
(Adjustment procedure)
1) Set the image loss amount to a desired value. (1 - 99: 0.677mm/
step)
2) Adjust the document scan start position so that the image loss
amount of an actual copy image becomes the value set in proce-
dure 1. (1 - 99: 0.127mm/step)
dure 1. (1 - 99: 0.127mm/step)
3) Adjust the resist roller ON timing so that the paper lead edge void
amount of an actual copy image is the specified value. (1 - 99:
0.127mm/step)
0.127mm/step)
4) Adjust the rear edge void amount. (1 - 99: 0.127mm/step)
5) Adjust the left edge void amount. (1 - 99: 0.127mm/step)
8
RSPF(SUB)
SCAN Sub scanning
magnification ratio
adjustment (RSPF)
magnification ratio
adjustment (RSPF)
1-255*
128
48-9
Purpose
Adjustment
Function (Purpose)
FAX magnification ratio adjustment (print)
Section
FAX
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
PAPER EMPTY
Item
Content
1
COPY START
Copy start
2
Horizontal
Print magnification ratio adjustment
(Horizontal, vertical to paper passing)
(Horizontal, vertical to paper passing)
3
Vertical
Print magnification ratio adjustment
(Vertical, parallel to paper passing)
(Vertical, parallel to paper passing)
4
Horizontal (DUPLEX)
Print magnification ratio adjustment on
the back surface (Horizontal, vertical to
paper passing)
the back surface (Horizontal, vertical to
paper passing)
5
Vertical (DUPLEX)
Print magnification ratio adjustment on
the back surface (Vertical, parallel to
paper passing)
the back surface (Vertical, parallel to
paper passing)
Item
Content
Setting
range
Default
1
1 2 8
1 2 8
1 2 8
1 2 8
1 2 8
1 2 8
2
1 2 8
1 2 8
1 2 8
1 2 8
2
50
50-1
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the copy lead edge position.
Item
Picture quality
Image position
Item
Content
Setting
range
Default
1
RRC-A
Original scan start position
adjustment
Lead edge position
adjustment value (OC)
adjustment
Lead edge position
adjustment value (OC)
1-99
43
2
DEN-A
Lead edge cancel
adjustment (Main cassette)
adjustment (Main cassette)
1-99
18
3
DEN-A-MANUAL Lead edge cancel
adjustment (Manual feed
cassette)
cassette)
1-99
18
4
RRC-OPTION
Lead edge cancel
adjustment (Option cassette)
adjustment (Option cassette)
1-99
18
5
RRC-DUPLEX
Lead edge cancel
adjustment (back of the
machine)
adjustment (back of the
machine)
1-99
18
6
DEN-B
Rear edge void adjustment
1-99
30
7
DEN-B-DUP
Rear edge void adjustment
(Duplex)
(Duplex)
1-99
50
8
SIDE VOID
Left edge void adjustment
(First print surface)
(First print surface)
1-99
18
9
SIDE VOID-DUP Left edge void adjustment
(Duplex)
1-99
18
10 LOSS(OC)
Image loss amount
adjustment (Lead edge
image loss set value) (OC)
adjustment (Lead edge
image loss set value) (OC)
1-5
3
AR-M236/M276/M237/M277 SIMULATION 8 - 39
Operation/procedure
1.
Touch the item to be adjusted.
The item and the currently set value are highlighted.
The item and the currently set value are highlighted.
2.
Press the [START] key.
The display is shifted to the copy menu.
The display is shifted to the copy menu.
3.
Select the paper feed tray and the print density.
Enter the adjustment value with the 10-key.
Enter the adjustment value with the 10-key.
4.
Press the [START] key.
Copying is started.
Copying is started.
Note: When this simulation is canceled, the display is shifted to the ini-
tial menu, but the machine is not reset.
Operation/procedure
1.Touch the item to be adjusted.
The item and the currently set value are highlighted.
2.
Press the [START] key.
The display is shifted to the copy menu.
The display is shifted to the copy menu.
3.
Select the paper feed tray and the print density.
Enter the adjustment value with the 10-key.
Enter the adjustment value with the 10-key.
4.
Press the [START] key.
Copying is started.
Copying is started.
Note: When this simulation is canceled, the display is shifted to the ini-
tial menu, but the machine is not reset.
Operation/procedure
1.
Select "1: COPY START."
The currently set value is highlighted beside the item.
The currently set value is highlighted beside the item.
2.
Enter the correction value with the 10-key, and press the [#/P] key.
3.
Press the [START] key.
Copying is started.
Copying is started.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
The optimum paper tray for the scanned size is selected.
4.
Select the scanning method.
Even when the RSPF is selected, if there is no original on the RSPF,
the OC is scanned.
Even when the OC is selected, if there is any original on the RSPF, the
RSPF is scanned. (Setting 2)
the OC is scanned.
Even when the OC is selected, if there is any original on the RSPF, the
RSPF is scanned. (Setting 2)
Note: Executable only when the FAX is installed.
50-5
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print image position (top margin) on
the print paper in the print mode.
the print paper in the print mode.
Item
Picture quality
Print area
Item
Content
Setting range
Default
1
TRAY1
1st cassette
0-99
53
2
OPTION
Option cassette
1-99
3
MANUAL
Manual feed
4
DUPLEX
Back print
50-6
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print image position (top margin) on
print paper in the copy mode. (SPF/RSPF)
print paper in the copy mode. (SPF/RSPF)
Item
Picture quality
Image position
Item
Content
Setting
range
Default
1
SIDE1
Surface original scan start
position adjustment value
position adjustment value
1-99
50
2
SIDE2
Back original scan start
position set value
position set value
1-99
50
3
END EDGE
Rear edge void
adjustment value (SPF)
adjustment value (SPF)
1-99
50
4
LOSS(SIDE1)
Surface image loss
quantity set value
quantity set value
1-5
3
5
LOSS(SIDE2)
Back image loss quantity
set value
set value
1-5
3
6
REARLOS(SIDE1) Surface rear edge image
loss quantity set value
1-5
3
7
REARLOS(SIDE2) Back rear edge image loss
quantity set value
1-5
3
50-8
The adjustments on the machine side must have been normally
completed.
completed.
Purpose
Adjustment
Function (Purpose)
FAX lead edge adjustment (read)
Section
FAX
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
PAPER EMPTY
Item
Content
Setting
range
Default
1
COPY START Copy start
–
–
2
SCAN
SELECT (OC/
SPF/RSPF)
SELECT (OC/
SPF/RSPF)
Scan selection (1: OC, 2:
SPF, 3: RSPF back)
SPF, 3: RSPF back)
1-3
1
3
LEAD
Scan lead edge position
adjustment value of the
selected method in 2.
adjustment value of the
selected method in 2.
43-57
50
4
LEFT
Scan left edge position
adjustment value of the
selected method in 2.
adjustment value of the
selected method in 2.
43-57
50
5
REAR
Scan rear edge position
adjustment value of the
selected method in 2.
adjustment value of the
selected method in 2.
43-57
50
6
RIGHT
Scan right edge position
adjustment value of the
selected method in 2.
adjustment value of the
selected method in 2.
43-57
50
5 0
5 0
5 0
2
AR-M236/M276/M237/M277 SIMULATION 8 - 40
Operation/procedure
1.
Select "1: COPY START."
The currently set value is highlighted beside the item.
The currently set value is highlighted beside the item.
2.
Press the [START] key.
Copying is started.
Copying is started.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
When two pages are scanned, duplex print is made,
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Touch the item to be adjusted.
The item and the currently set value are highlighted.
The item and the currently set value are highlighted.
2.
Press the [START] key.
The display is shifted to the copy menu.
The display is shifted to the copy menu.
3.
Select the paper feed tray and the print density.
Enter the adjustment value with the 10-key.
Enter the adjustment value with the 10-key.
4.
Press the [START] key.
Copying is started.
Copying is started.
Note: When this simulation is canceled, the display is shifted to the ini-
tial menu, but the machine is not reset.
Operation/procedure
1.
Touch the item to be adjusted.
The item and the currently set value are highlighted.
The item and the currently set value are highlighted.
2.
Press the [START] key.
The display is shifted to the copy menu.
The display is shifted to the copy menu.
3.
Select the paper feed tray and the print density.
Enter the adjustment value with the 10-key.
Enter the adjustment value with the 10-key.
4.
Press the [START] key.
Copying is started.
Copying is started.
Note: When this simulation is canceled, the display is shifted to the ini-
tial menu, but the machine is not reset.
50-9
Purpose
Adjustment
Function (Purpose)
FAX lead edge adjustment (print)
Section
FAX
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
PAPER EMPTY
Item
Content
Setting
range
Default
1
COPY START
Copy start
–
–
2
LEAD
Print lead edge void
adjustment value (Front
surface)
adjustment value (Front
surface)
43-57
50
3
LEFT
Print left edge void
adjustment value (Front
surface)
adjustment value (Front
surface)
43-57
50
4
REAR
Print rear edge void
adjustment value (Front
surface)
adjustment value (Front
surface)
43-57
50
5
LEAD
(DUPLEX)
(DUPLEX)
Print lead edge void
adjustment value (Back
surface)
adjustment value (Back
surface)
43-57
50
6
LEFT (DUPLEX) Print left edge void
adjustment value (Back
surface)
surface)
43-57
50
7
REAR
(DUPLEX)
(DUPLEX)
Print rear edge void
adjustment value (Back
surface)
adjustment value (Back
surface)
43-57
50
50-10
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print image center position.
(Adjustment can be made for each paper feed
section.)
(Adjustment can be made for each paper feed
section.)
Section
Image processing (ICU)
Item
Picture quality
Image position
1
Item
Content
Setting range
Default
1
BYPASS
Manual feed
1-99
50
2
TRAY1
1st cassette
3
TRAY2
2nd cassette
4
TRAY3
3rd cassette
5
TRAY4
4th cassette
6
DUPLEX
Back print
50-12
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print image center position.
(Adjustment can be made for each document mode.)
(Adjustment can be made for each document mode.)
Section
Image processing
Item
Picture quality
Image position
Item
Content
Setting range
Default
1
OC
OC
1-99
50
2
SPF(SIDE1)
SPF front surface
3
SPF(SIDE2)
SPF back surface
AR-M236/M276/M237/M277 SIMULATION 8 - 41
Operation/procedure
1.
Touch the item to be adjusted.
The item and the currently set value are highlighted.
The item and the currently set value are highlighted.
2.
Enter the adjustment value with the 10-key.
Operation/procedure
1.
Touch the item to be adjusted.
The item and the currently set value are highlighted.
The item and the currently set value are highlighted.
2.
Press the [START] key.
The display is shifted to the copy menu.
The display is shifted to the copy menu.
3.
Select the paper feed tray and the print density.
Enter the adjustment value with the 10-key.
Enter the adjustment value with the 10-key.
4.
Press the [START] key.
Copying is started.
Copying is started.
Note: When this simulation is canceled, the display is shifted to the ini-
tial menu, but the machine is not reset.
Operation/procedure
Select the set value with the 10-key.
Operation/Procedure
1.
Touch the item to be adjusted.
The item and the currently set value are highlighted.
The item and the currently set value are highlighted.
2.
Enter the set value with the 10-key.
51
51-1
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the OPC drum separation pawl ON
time.
time.
Section
Image process (Photoconductor/Developing/Transfer/
Cleaning)
Cleaning)
Item
Operation
Item
Setting range
Default
1
600dpi
1-99
50
2
1200dpi
51-2
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the contact pressure of paper onto the
resist roller in each section (copier paper feed section,
duplex paper feed section, RSPF paper feed section).
(When the print image position varies greatly for the
paper or when a lot of paper jam troubles occur, the
adjustment is required.)
resist roller in each section (copier paper feed section,
duplex paper feed section, RSPF paper feed section).
(When the print image position varies greatly for the
paper or when a lot of paper jam troubles occur, the
adjustment is required.)
Section
Paper transport (Discharge/Switchback/Transport)
Item
Operation
Item
Content
Setting range
Default
1
BYPASS
Manual feed
1-99
50
2
TRAY1
1st cassette
3
TRAY2
2nd cassette
4
TRAY3
3rd cassette
5
TRAY4
4th cassette
6
DUPLEX
Back print
7
SPF(SIDE1)
SPF front surface
8
SPF(SIDE2)
SPF back surface
51-8
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the OPC drum separation pawl operation
inhibit. (ON/OFF)
inhibit. (ON/OFF)
Section
Image process (Photoconductor/Developing/Transfer/
Cleaning)
Cleaning)
Item
Operation
Item
Content
Setting range
Default
0
ON
Enable
0-1
0
1
OFF
Disable
51-9
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to adjust the OPC drum separation voltage ON/
OFF timing.
OFF timing.
Section
Process (OPC drum, developing, transfer, cleaning)
Item
Operation
Item
Content
Setting
range
Default
1
SHV ON
Separation voltage ON timing
* Transfer V2ON reference
* Transfer V2ON reference
(Synchronized with the
adjustment value of 50.)
adjustment value of 50.)
25-90
50
2
SHV OFF
Separation voltage OFF timing
* Transfer V2OFF reference
* Transfer V2OFF reference
(Synchronized with the
adjustment value of 50.)
adjustment value of 50.)
50-90
75
Click on the first or last page to see other AR-M276 (serv.man6) service manuals if exist.