Sharp AR-M276 (serv.man6) Service Manual ▷ View online
AR-M236/M276/M237/M277 SIMULATION 8 - 34
Operation/procedure
1.
Select "1: COPY START."
The currently set value is displayed beside the item.
The currently set value is displayed beside the item.
2.
Enter the set value of the exposure level with the 10-key, and
press the [#/P] key.
press the [#/P] key.
3.
Press the [START] key.
Copying is started and the set value is stored.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Select "1: COPY START."
The currently set value is displayed beside the item.
The currently set value is displayed beside the item.
2.
Enter the set value of the exposure level with the 10-key, and
press the [#/P] key.
press the [#/P] key.
3.
Press the [START] key.
Copying is started and the set value is stored.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Select "1: COPY START."
The currently set value is displayed beside the item.
The currently set value is displayed beside the item.
2.
Enter the set value of the exposure level with the 10-key, and
press the [#/P] key.
press the [#/P] key.
3.
Press the [START] key.
Copying is started and the set value is stored.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Select "1: COPY START."
The currently set value is displayed beside the item.
The currently set value is displayed beside the item.
46-12
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX exposure level adjustment (1 mode automatic
adjustment)
adjustment)
Section
FAX
Item
Image quality
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
JAM
PAPER EMPTY
Item
Setting range
Default
1
COPY START
–
–
2
FAX EXP.LEVEL
0-99
50
46-13
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX exposure level adjustment (Normal mode
individual adjustment)
individual adjustment)
Section
FAX
Item
Image quality
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
5 0
1
Item
Content
Setting range
Default
1 COPY START
Copy start
–
–
2 EXP.LEVEL
Exposure level
selection
selection
0-99
50
3 AE
Normal text AE
4 MANUAL
Normal text MANUAL
46-14
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX exposure level adjustment (Fine text mode
individual adjustment)
individual adjustment)
Section
FAX
Item
Image quality
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
Item
Content
Setting
range
Default
1
COPY START
Copy start
–
–
2
EXP.LEVEL
Exposure level
selection
selection
0-99
50
3
AE (PHOTO ON)
Fine text AE (Half tone)
4
AE (PHOTO OFF)
Fine text AE
5
MANUAL (PHOTO
ON)
ON)
Fine text MANUAL (Half
tone)
tone)
6
MANUAL (PHOTO
OFF)
OFF)
Fine text MANUAL
46-15
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX exposure level adjustment (Super Fine mode
individual adjustment)
individual adjustment)
Section
FAX
Item
Image quality
1
1
AR-M236/M276/M237/M277 SIMULATION 8 - 35
2.
Enter the set value of the exposure level with the 10-key, and
press the [#/P] key.
press the [#/P] key.
3.
Press the [START] key.
Copying is started and the set value is stored.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note:Executable only when the FAX is installed.
Operation/procedure
1.
Select "1: COPY START."
The currently set value is displayed beside the item.
The currently set value is displayed beside the item.
2.
Enter the set value of the exposure level with the 10-key, and
press the [#/P] key.
press the [#/P] key.
3.
Press the [START] key.
Copying is started and the set value is stored.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Touch the item to be adjusted.
The adjustment item and the current set value are highlighted.
The adjustment item and the current set value are highlighted.
2.
Press the [START] key.
The display is shifted to the copy menu.
The display is shifted to the copy menu.
3.
Select the paper feed tray and the print density.
Set the exposure level with the 10-key.
Set the exposure level with the 10-key.
4.
Press the [START] key.
Copying is started.
Copying is started.
(Auto adjustment)
Note: When this simulation is canceled, the display returns to the initial
menu but the machine is not reset.
Operation/procedure
1.
Touch the item to be adjusted.
The currently set value is highlighted beside the adjustment item.
The currently set value is highlighted beside the adjustment item.
2.
Press the [START] key.
The display is shifted to the adjustment value entry menu.
The display is shifted to the adjustment value entry menu.
3.
Enter the adjustment value with the 10-key, and press the [START]
key.
key.
When the [CUSTOM SETTINGS] key is pressed, the display returns to
the original state (adjustment item selection menu).
the original state (adjustment item selection menu).
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
Item
Content
Setting
range
Default
1
COPY START
Copy start
–
–
2
EXP.LEVEL
Exposure level selection
0 - 99
50
3
AE (PHOTO ON)
Super Fine AE (Half
tone)
tone)
4
AE (PHOTO OFF)
Super Fine AE
5
MANUAL
(PHOTO ON)
(PHOTO ON)
Super Fine MANUAL
(Half tone)
(Half tone)
6
MANUAL
(PHOTO OFF)
(PHOTO OFF)
Super Fine MANUAL
46-16
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX exposure level adjustment (Ultra Fine mode
individual adjustment)
individual adjustment)
Section
FAX
Item
Image quality
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
JAM
PAPER EMPTY
Item
Content
Setting
range
Default
1
COPY START
Copy start
–
–
2
EXP.LEVEL
Exposure level selection
0 - 99
50
3
AE (PHOTO ON)
Ultra Fine AE (Half
tone)
tone)
4
AE (PHOTO OFF)
Ultra Fine AE
5
MANUAL
(PHOTO ON)
(PHOTO ON)
Ultra Fine MANUAL
(Half tone)
(Half tone)
6
MANUAL
(PHOTO OFF)
(PHOTO OFF)
Ultra Fine MANUAL
3
5 0
5 0
5 0
5 0
1
46-18
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust inclination for each exposure mode.
Item
Picture quality
Item
Content
Setting
range
Default
1 AE
AE
1-99
50
2 TEXT
Character
Level 3.0
3 TEXT/PHOTO
Character/Photo
Level 3.0
4 PHOTO
Photo
Level 3.0
5 SUPER PHOTO
Super photo
Level 3.0
6 AE(TS)
AE(TS)
7 TEXT(TS)
Character (TS)
Level 3.0
8 TEXT/PHOTO(TS)
Character/Photo (TS)
Level 3.0
46-19
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to set the control method of the exposure mode.
Item
Picture quality
5 0
5 0
5 0
5 0
1
AR-M236/M276/M237/M277 SIMULATION 8 - 36
* Auto exposure mode
• When SIM 26-6 (Destination setup) is changed from EX Japan to
Japan, the setup value becomes 1 (Default: Japan). If, on the con-
trary, it is changed from Japan to EX Japan, the set value becomes
2 (Default: EX Japan)
trary, it is changed from Japan to EX Japan, the set value becomes
2 (Default: EX Japan)
• If the auto exposure mode setup value is changed, the setup value
of SIM 46-30 (AE limit setup) is reset to the default value.
Operation/procedure
1.
Touch the item to be adjusted.
The adjustment item and the currently set value are highlighted.
The adjustment item and the currently set value are highlighted.
2.
Enter the set value with the 10-key.
Operation/procedure
1.
Touch the item to be adjusted.
The adjustment item and the currently set value are highlighted.
The adjustment item and the currently set value are highlighted.
2.
Enter the set value with the 10-key.
If SIM 26-6 (Destination setup) and SIM46-19 (Auto exposure mode)
are changed, this setup is also changed to the default value accord-
ingly.
are changed, this setup is also changed to the default value accord-
ingly.
Operation/procedure
1.
Touch the item to be adjusted.
The adjustment item and the currently set value are highlighted.
The adjustment item and the currently set value are highlighted.
2.
Enter the set value with the 10-key.
Enter the set value with the 10-key.
Item
Content
Default
1
AE MODE
(1:EXPOSURE
(1:EXPOSURE
2:TONER)
Auto exposure mode*
(1: Priority on Image quality,
(1: Priority on Image quality,
2: Priority on toner consumption)
2
2
AE STOP(COPY)
(0:FIXED
(0:FIXED
1:REAL TIME)
Auto exposure STOP mode
(COPY)
(0: Fixed, 1: Real-time)
(COPY)
(0: Fixed, 1: Real-time)
0
3
AE STOP(FAX)
(0:FIXED
(0:FIXED
1:REAL TIME)
Auto exposure STOP mode (FAX)
(0: Fixed, 1: Real-time)
(0: Fixed, 1: Real-time)
0
4
AE STOP(SCAN)
(0:FIXED
(0:FIXED
1:REAL TIME)
Auto exposure STOP mode
(SCANNER)
(0: Fixed, 1: Real-time)
(SCANNER)
(0: Fixed, 1: Real-time)
0
46-20
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to set the exposure correction value of SPF/
RSPF for OC exposure.
RSPF for OC exposure.
Item
Picture quality
Item
Content
Setting range
Default
1
SPF EXPOSURE
SPF
1-99
53
2
RSPF EXPOSURE
RSPF
46-30
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the AE and the limit value in AE (Toner
save).
save).
Item
Setting range
Default
1
AE
0-31
0
2
AE(TS)
46-31
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the AE and the limit value in AE (Toner
save).
save).
Item
Setting range
Default
1
AE
0 - 2
1
2
AE (TS)
3
TEXT/PHOTO
4
PHOTO
5
SUPER PHOTO
46-39
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to switch the FAX send image quality.
Item
Content
Setting range
Default
0
HAIRLINE
Original with pencil lines
and thin lines
and thin lines
0 - 1
0
1
PRINTER
Printed original
AR-M236/M276/M237/M277 SIMULATION 8 - 37
Operation/procedure
1.
Touch the item to be set.
The item and the currently set value are highlighted.
The item and the currently set value are highlighted.
2.
Press the [START] key.
The display is shifted to the copy menu.
The display is shifted to the copy menu.
3.
Select the paper feed tray and the print density, and enter the
adjustment value with the 10-key.
adjustment value with the 10-key.
4.
Press the [START] key.
Copying is started.
Copying is started.
Note: When this simulation is canceled, the display is shifted to the ini-
tial menu, but the machine is not reset.
Operation/procedure
1.
Touch the item to be set.
The item and the currently set value are highlighted.
The item and the currently set value are highlighted.
2.
Press the [START] key.
The display is shifted to the copy menu.
The display is shifted to the copy menu.
3.
Select the paper feed tray and the print density, and enter the
adjustment value with the 10-key.
adjustment value with the 10-key.
4.
Press the [START] key.
Copying is started.
Copying is started.
Operation/procedure
1.
Select "1: COPPY START."
The currently set value is highlighted beside the item.
The currently set value is highlighted beside the item.
2.
Enter the set value of the exposure level with the 10-key, and
press the [#/P] key.
press the [#/P] key.
3.
Press the [START] key.
Copying is started and the set value is stored.
Copying is started and the set value is stored.
There is no operation of tray selection.
The optimum paper tray for the scanned size is selected.
Even when the RSPF is selected, if there is no original on the RSPF,
the OC is scanned.
the OC is scanned.
Even when the OC is selected, if there is any original on the RSPF, the
RSPF is scanned. (Setting 2)
RSPF is scanned. (Setting 2)
48
48-1
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the copy mode magnification ratio (main
scanning direction, sub scanning direction).
scanning direction, sub scanning direction).
Section
Image processing
Item
Picture quality
Item
Content
Setting
range
Default
1
F-R
Main scanning magnification
ratio adjustment
ratio adjustment
1-99
50
2
SCAN
Sub scanning magnification
ratio adjustment
ratio adjustment
60
3
SPF (SIDE1)
SPF surface sub scan
magnification ratio
magnification ratio
50
4
SPF (SIDE2)
SPF back surface sub scan
magnification ratio
magnification ratio
5
DUPLEX
DUPLEX sub scanning
magnification ratio adjustment
magnification ratio adjustment
48-2
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the scanner mode magnification ratio
(main/sub scanning direction).
(main/sub scanning direction).
Section
Image processing
Item
Picture quality
Item
Content
Setting
range
Default
1
F-R
Main scanning magnification
ratio adjustment
ratio adjustment
1-99
50
2
SCAN
Sub scanning magnification
ratio adjustment
ratio adjustment
3
SPF (SIDE1)
RSPF surface sub scan
magnification ratio
magnification ratio
4
SPF (SIDE2)
RSPF back surface sub scan
magnification ratio
magnification ratio
48-8
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX exposure level adjustment (Fine text mode
individual adjustment)
individual adjustment)
Section
FAX
Related soft SW
SW76-1 to 8, SW77-1 to 8
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
JAM
PAPER EMPTY
Item
Content
Setting
range
Default
1
COPY START
Copy start
–
–
2
SCAN SELECT
(OC/SPF/RSPF)
(OC/SPF/RSPF)
Scan selection (OC/
SPF/ RSPF)
SPF/ RSPF)
1-255*
128
3
OC(MAIN)
SCAN Main scanning
magnification ratio
adjustment (OC)
magnification ratio
adjustment (OC)
1-255*
128
4
OC(SUB)
SCAN Sub scanning
magnification ratio
adjustment (OC)
magnification ratio
adjustment (OC)
1-255*
128
5
SPF(MAIN)
SCAN Main scanning
magnification ratio
adjustment (SPF)
magnification ratio
adjustment (SPF)
1-255*
128
6
SPF(SUB)
SCAN Sub scanning
magnification ratio
adjustment (SPF)
magnification ratio
adjustment (SPF)
1-255*
128
7
RSPF(MAIN)
SCAN Main scanning
magnification ratio
adjustment (RSPF)
magnification ratio
adjustment (RSPF)
1-255*
128
Click on the first or last page to see other AR-M276 (serv.man6) service manuals if exist.