Sharp AR-M165-207 (serv.man24) User Manual / Operation Manual ▷ View online
20
SCANNING FROM A WIA-COMPLIANT
APPLICATION (WINDOWS XP)
APPLICATION (WINDOWS XP)
If you are using Windows XP, you can use the WIA driver to scan from Paint and other WIA-compliant applications.
The procedure for scanning using Paint is explained in the following.
The procedure for scanning using Paint is explained in the following.
1
Place the original(s) that you wish to
scan on the document glass or in the
SPF.
scan on the document glass or in the
SPF.
For information on placing an original for
scanning, see "4. COPY FUNCTIONS" in the
"Operation manual (for general information and
copier)".
scanning, see "4. COPY FUNCTIONS" in the
"Operation manual (for general information and
copier)".
2
Start Paint and then select [From
Scanner or Camera] from the [File]
menu.
Scanner or Camera] from the [File]
menu.
The scan screen of the WIA driver will appear.
3
Select the paper source and picture
type, and click the [Preview] button.
type, and click the [Preview] button.
• The preview image will appear.
• If you placed the original on the document
• If you placed the original on the document
glass, select [Flatbed] for the "Paper source".
• If you placed the original in the SPF, select
[Document Feeder] for the "Paper source" and
specify the original size in "Page size".
specify the original size in "Page size".
4
Click the [Scan] button.
• Scanning begins and the image is acquired into
Paint.
• Use [Save] in your application to select a file
name and folder for the scanned image, and
save the image.
save the image.
• To cancel scanning after the [Scan] button has
been clicked, click the [Cancel] button or press
the [C] key (
the [C] key (
) or [CA] key (
) on the
machine operation panel.
If you have WIA drivers for other devices
installed on your computer, the "Select
Device" screen will open. Select [SHARP
AR-XXXX] and click the [OK] button.
installed on your computer, the "Select
Device" screen will open. Select [SHARP
AR-XXXX] and click the [OK] button.
Note
• If an SPF is not installed on your machine,
the "Paper source" menu will not appear.
• If you select [Document Feeder] for the
"Paper source" and click the [Preview]
button, the top original in the SPF is
previewed. The previewed original is sent
to the original exit area, so you will need
to return it to the SPF before starting the
scanning job.
button, the top original in the SPF is
previewed. The previewed original is sent
to the original exit area, so you will need
to return it to the SPF before starting the
scanning job.
• To view Help for a setting, click the
button in the upper right-hand corner of
the window and then click the setting.
the window and then click the setting.
Note
21
3
SCANNING FROM THE "SCANNER AND
CAMERA WIZARD" (WINDOWS XP)
CAMERA WIZARD" (WINDOWS XP)
The procedure for scanning with the "Scanner and Camera Wizard" in Windows XP is explained here. The "Scanner
and Camera Wizard" lets you scan an image without using a TWAIN-compliant or WIA-compliant application.
and Camera Wizard" lets you scan an image without using a TWAIN-compliant or WIA-compliant application.
1
Place the original(s) that you wish to
scan on the document glass or in the
SPF.
scan on the document glass or in the
SPF.
For information on placing an original for
scanning, see "4. COPY FUNCTIONS" in the
"Operation manual (for general information and
copier)".
scanning, see "4. COPY FUNCTIONS" in the
"Operation manual (for general information and
copier)".
2
Click the [start] button, the [Control
Panel], [Printers and Other Hardware],
and then [Scanners and Cameras].
Panel], [Printers and Other Hardware],
and then [Scanners and Cameras].
3
Click the [SHARP AR-XXXX] icon and
then click [Get pictures] in [Imaging
Tasks].
then click [Get pictures] in [Imaging
Tasks].
The "Scanner and Camera Wizard" will appear.
4
Click the [Next] button.
5
Select the "Picture type" and "Paper
source", and click the [Next] button.
source", and click the [Next] button.
• If you placed the original on the document
glass, select [Flatbed] for the "Paper source".
• If you placed the original in the SPF, select
[Document Feeder] for the "Paper source" and
specify the original size in "Page size".
specify the original size in "Page size".
• You can click the [Preview] button to display the
preview image.
• If an SPF is not installed on your machine,
the "Paper source" menu will not appear.
• If you select [Document Feeder] for the
"Paper source" and click the [Preview]
button, the top original in the SPF is
previewed. The previewed original is sent
to the original exit area, so you will need
to return it to the SPF before starting the
scanning job.
button, the top original in the SPF is
previewed. The previewed original is sent
to the original exit area, so you will need
to return it to the SPF before starting the
scanning job.
• To adjust the resolution, picture type,
brightness and contrast settings, click the
[Custom settings] button.
[Custom settings] button.
Note
22
SCAN
6
Specify a group name, format and
folder for saving the image, and then
click the [Next] button.
folder for saving the image, and then
click the [Next] button.
JPG, BMP, TIF or PNG can be selected for the
format. To begin scanning, click the [Next] button.
format. To begin scanning, click the [Next] button.
7
When scanning ends, the following
screen will appear. Select the next
task you wish to perform and then
click the [Next] button.
screen will appear. Select the next
task you wish to perform and then
click the [Next] button.
If you are ready to end the session, click
[Nothing. I'm finished working with these
pictures].
[Nothing. I'm finished working with these
pictures].
8
Click the [Finish] button.
The "Scanner and Camera Wizard" closes and
the scanned image is saved in the specified
folder.
the scanned image is saved in the specified
folder.
23
3
SCANNING USING THE KEYS ON THE MACHINE
The procedure for scanning using the [SCAN] key is explained in the following. When scanning is performed by this method,
the previously specified application will automatically start and the scanned image will be acquired into the application.
the previously specified application will automatically start and the scanned image will be acquired into the application.
1
Place the original(s) that you wish to scan
on the document glass or in the SPF.
on the document glass or in the SPF.
For information on how to place the original, see
"4. COPY FUNCTIONS" in the "Operation
manual (for general information and copier)".
"4. COPY FUNCTIONS" in the "Operation
manual (for general information and copier)".
2
Press the [SCAN] key.
The [SCAN] key indicator lights up to indicate that the
machine is in scanner mode and the destination
selection screen appears in the display. A name can
be entered in Button Manager for each of the
destinations "SC1:" to "SC6:", which will appear in the
format "SC1:XXXXX".
machine is in scanner mode and the destination
selection screen appears in the display. A name can
be entered in Button Manager for each of the
destinations "SC1:" to "SC6:", which will appear in the
format "SC1:XXXXX".
3
Use the [
] or [
] key to select the
desired scan destination.
The following applications have been set at the factory
for each of the scan destinations 1 to 6.
If you wish to change a setting, see
for each of the scan destinations 1 to 6.
If you wish to change a setting, see
"BUTTON
MANAGER SETTINGS" (page 25)
.
4
Press the [OK] key.
The selected destination
appears.
appears.
5
Press the [START] key.
Scanning begins.
• Scanner mode cannot be used in the following situations:
• A problem has occurred in the machine such as a paper misfeed or an open cover.
• The key operator programs are being used.
• The tray paper size is being set.
• During copying or printing
• During scanning of an original for a fax transmission (when the fax option is installed)
• The key operator programs are being used.
• The tray paper size is being set.
• During copying or printing
• During scanning of an original for a fax transmission (when the fax option is installed)
• If the machine is in copy mode, press the [SCAN] key to switch to scanner mode and clear the previously set
copy settings.
Note
When the dual function board is installed
If computers are connected to both of the
USB ports on the machine, the following
screen will appear in the display. In this
case, use the [
USB ports on the machine, the following
screen will appear in the display. In this
case, use the [
] or [
] key to select the
USB port that you wish to use and press the
[OK] key. For the location of the ports, see
"1. BEFORE USING THE PRODUCT" in the
"Operation manual (for general information
and copier)".
[OK] key. For the location of the ports, see
"1. BEFORE USING THE PRODUCT" in the
"Operation manual (for general information
and copier)".
COPY
ON LINE DATA
LINE
DATA
SCAN
PRINT
EXP
DESTINATION SELECT
SC1:
SC2:
SC3:
SC4:
SC3:
SC4:
Note
INTERFACE SELECT
USB-1
USB-2
GH
PQR
DUPLEX
SPECIAL FUNCTION
DUPLEX SCAN
Scan Destination
Application that starts
SC1:
Sharpdesk
SC2:
Email
SC3:
FAX
SC4:
OCR
SC5:
Microsoft Word
SC6:
Filing
• The [COPY] key, [PRINT] key, or [FAX]
key can be pressed in scanner mode to
switch to the corresponding mode.
switch to the corresponding mode.
• For restrictions on using copy, printer, or
fax mode while in scanner mode, or using
scanner mode while in copy, printer, or fax
mode, see "OPERATION IN COPY,
PRINT, SCAN, AND FAX MODES" in "1.
BEFORE USING THE PRODUCT" in the
"Operation manual (for general
information and copier)".
scanner mode while in copy, printer, or fax
mode, see "OPERATION IN COPY,
PRINT, SCAN, AND FAX MODES" in "1.
BEFORE USING THE PRODUCT" in the
"Operation manual (for general
information and copier)".
GHI
OK
BACK
Ready to scan.
SC2:
WXYZ
@.-_
READ-END
Note
Click on the first or last page to see other AR-M165-207 (serv.man24) service manuals if exist.