Sharp AR-M165-207 (serv.man24) User Manual / Operation Manual ▷ View online
12
PRINTER SHARING
SHARED PRINTER SETTINGS
Settings on the computer to which the machine is directly
connected
connected
Follow the steps below to use the computer directly connected to the machine as a print server. If your operating
system is Windows 95/98/Me, start from step 1. If your operating system is Windows NT 4.0, 2000 or XP, open the
control panel and then start from step 6.
system is Windows 95/98/Me, start from step 1. If your operating system is Windows NT 4.0, 2000 or XP, open the
control panel and then start from step 6.
1
Click the [Start] button, point to
[Settings] and then click [Control
Panel].
[Settings] and then click [Control
Panel].
2
Double-click the [Network] icon (
).
3
Click the [File and Print Sharing]
button.
button.
4
Enable [I want to be able to allow
others to print to my printer(s).] by
clicking the checkbox, and then click
the [OK] button.
others to print to my printer(s).] by
clicking the checkbox, and then click
the [OK] button.
5
Click the [OK] button in the [Network]
dialog box.
dialog box.
6
Click [Printers and Other Hardware] in
the [Control Panel], and click [Printers
and Faxes].
the [Control Panel], and click [Printers
and Faxes].
In operating systems other than Windows XP,
double-click the [Printers] icon.
double-click the [Printers] icon.
7
Click the [SHARP AR-XXXX] printer
driver icon and select [Sharing] from
the [File] menu.
driver icon and select [Sharing] from
the [File] menu.
8
Configure the settings for sharing and
then click the [OK] button.
then click the [OK] button.
☞
CLIENT SETTINGS (page 13)
For information on the settings, refer to your operating manual or to the help files for your operating system.
Note
If the [Network] icon does not appear in
Windows Me, click [view all Control Panel
options].
Windows Me, click [view all Control Panel
options].
If a message appears asking you to restart
the computer, click the [Yes] button and
restart the computer. After restarting the
computer, open the printer folder and
continue the setup procedure from Step 6.
the computer, click the [Yes] button and
restart the computer. After restarting the
computer, open the printer folder and
continue the setup procedure from Step 6.
Note
Note
For information on a setting, click the
button at the top-right of the dialog box and
then click the setting to display Help.
then click the setting to display Help.
Note
13
PRINTER SHARING
2
CLIENT SETTINGS
Follow the procedure below to install the printer driver on the client.
1
Click the [start] button and then click
[Control Panel].
[Control Panel].
In Windows 95/98/Me/2000, click the [Start]
button and select [Settings].
button and select [Settings].
2
Click [Printers and Other Hardware]
and then [Printers and Faxes].
and then [Printers and Faxes].
In Windows 95/98/Me/2000, click [Printers].
3
Click [Add a printer] in [Printer Tasks].
• In Windows 95/98/Me/2000, double-click the
[Add Printer] icon.
• The "Add Printer Wizard" will appear.
4
Click the [Next] button.
5
Select [A network printer, or a printer
attached to another computer] and
then click the [Next] button.
attached to another computer] and
then click the [Next] button.
In Windows 95/98/Me/2000, select [Network
printer] and then click the [Next] button.
printer] and then click the [Next] button.
6
Select [Browse for a printer] and click
the [Next] button.
the [Next] button.
• In Windows 95/98/Me, click the [Browse]
button.
• If you are using Windows 2000, select [Type
the printer name, or click Next to browse for a
printer] and then click the [Next] button.
printer] and then click the [Next] button.
7
Select the printer to be shared in the
network and then click the [Next]
button.
network and then click the [Next]
button.
If you are using Windows 95/98/Me, select the
printer to be shared, click the [OK] button, and
then click the [Next] button.
printer to be shared, click the [OK] button, and
then click the [Next] button.
The contents of this window will vary depending
on your network environment.
on your network environment.
8
Select settings in the [Default Printer]
screen and then click the [Next]
button.
screen and then click the [Next]
button.
9
Click the [Finish] button.
If your operating system is Windows NT 4.0, refer to
"Settings in Windows NT 4.0" (page 14)
.
Note
14
PRINTER SHARING
Settings in Windows NT 4.0
If your operating system is Windows NT 4.0, configure settings as follows in the printer properties after installing the
printer driver. For the procedure for installing the printer driver, see "1. INSTALLING THE SOFTWARE (THAT
ACCOMPANIES THE MACHINE)" in the "Software setup guide".
printer driver. For the procedure for installing the printer driver, see "1. INSTALLING THE SOFTWARE (THAT
ACCOMPANIES THE MACHINE)" in the "Software setup guide".
1
Click the [Start] button, select
[Settings] and then click [Printers].
[Settings] and then click [Printers].
2
Click the [SHARP AR-XXXX] printer
driver icon and select [Properties]
from the [File] menu.
driver icon and select [Properties]
from the [File] menu.
The printer properties will appear.
3
Click the [Ports] tab and then click the
[Add Port] button.
[Add Port] button.
The [Printer Ports] dialog box will appear.
4
Select [Local Port] in the "Available
Printer Ports" list, and click the [New
Port] button.
Printer Ports" list, and click the [New
Port] button.
The "Port Name" dialog box will appear.
5
Enter "\\(name of server connected to
machine)\(name of shared printer)",
and click the [OK] button.
machine)\(name of shared printer)",
and click the [OK] button.
6
Click the [Close] button in the [Printer
Ports] dialog box.
Ports] dialog box.
7
Click the [OK] button in the printer
properties window.
properties window.
name of server connected to machine
name of shared printer
15
3
SCAN
This chapter explains how to scan from a computer connected to the machine by a USB cable, and how to scan
using the machine's operation panel.
using the machine's operation panel.
SCANNING OVERVIEW
The flow chart shown below provides an overview of scanning.
*1 TWAIN is an international interface standard for scanners and other image acquisition devices. By installing a TWAIN driver on
your computer, you can scan and work with images using a variety of TWAIN-compliant applications.
*2 WIA (Windows Imaging Acquisition) is a Windows function that allows a scanner, digital camera or other imaging device to
communicate with an image processing application. The WIA driver for this machine can only be used in Windows XP.
*3 To begin scanning using the machine's operation panel, settings must be configured in the Control Panel after Button Manager
is installed. For more information, see "SETTING UP BUTTON MANAGER" in "1. INSTALLING THE SOFTWARE (THAT
ACCOMPANIES THE MACHINE)" in the "Software setup guide".
ACCOMPANIES THE MACHINE)" in the "Software setup guide".
When the dual function board is installed
Before using the machine in USB 2.0 High-speed mode, be sure to read "USB2.0 MODE" and "System
requirements for USB 2.0 (Hi-Speed mode)" in the "Key operator's guide".
requirements for USB 2.0 (Hi-Speed mode)" in the "Key operator's guide".
The environment in which the machine's scanning function can be used is subject to certain limitations. For more
information, see "1. INSTALLING THE SOFTWARE (THAT ACCOMPANIES THE MACHINE)" in the "Software
setup guide".
information, see "1. INSTALLING THE SOFTWARE (THAT ACCOMPANIES THE MACHINE)" in the "Software
setup guide".
Note
Caution
Scanning from a
TWAIN*
TWAIN*
1
-compliant or
WIA*
2
-compliant application
Scanning from the "Scanner
and Camera Wizard"
(Windows XP)
and Camera Wizard"
(Windows XP)
Using the machine to begin
scanning
scanning
*3
Place the original in the scanning position
☞For more information, see "4. COPY FUNCTIONS" in the "Operation manual (for general information and copier)".
Start up a Twain-compliant
or WIA-compliant
application, and select the
machine's scanner driver.
or WIA-compliant
application, and select the
machine's scanner driver.
Start up the "Scanner and
Camera Wizard" from
"Control Panel" in your
computer.
Camera Wizard" from
"Control Panel" in your
computer.
Press the [SCAN] key on the
machine to switch to
scanner mode and select the
destination (SC1: to SC6:)
machine to switch to
scanner mode and select the
destination (SC1: to SC6:)
Set the scan preferences
Scanning
☞
SCANNING FROM A
TWAIN-COMPLIANT
APPLICATION (page 16)
TWAIN-COMPLIANT
APPLICATION (page 16)
,
SCANNING FROM A
WIA-COMPLIANT APPLICATION
(WINDOWS XP) (page 20)
WIA-COMPLIANT APPLICATION
(WINDOWS XP) (page 20)
Scanning
☞
SCANNING FROM THE
"SCANNER AND CAMERA
WIZARD" (WINDOWS XP)
(page 21)
"SCANNER AND CAMERA
WIZARD" (WINDOWS XP)
(page 21)
Scanning
☞
SCANNING USING THE
KEYS ON THE MACHINE
(page 23)
KEYS ON THE MACHINE
(page 23)
,
BUTTON MANAGER (page 24)
Click on the first or last page to see other AR-M165-207 (serv.man24) service manuals if exist.