Sharp AR-C250 (serv.man6) User Manual / Operation Manual ▷ View online
4-1
CHAPTER
4
CHAPTER 4
SUPPLIES
This chapter describes the supplies for this copier such as paper and
toner.
toner.
Page
●
●
●
●
●
PAPER
.........................................
4-2
Types and sizes of copy paper
.........................
4-2
Loading copy paper
................................
4-2
●
●
●
●
●
ADDING TONER
..................................
4-5
●
●
●
●
●
USED TONER DISPOSAL
...........................
4-8
●
●
●
●
●
STORAGE OF SUPPLIES
...........................
4-9
4-2
CHAPTER
4
PAPER
Types and sizes of copy paper
Size
Weight
Capacity
Special paper
(80
g
/m
2
(21 lb.) paper)
Paper trays
A5 to A3
60~105
g
/m
2
500 sheets
(5-1/2" x 8-1/2"
(16 lbs. to 28 lbs.)
to 11" x 17")
Bypass tray
A6 to A3W
60~200
g
/m
2
50 sheets
Transparency film,
(5-1/2" x 8-1/2"
(16 lbs. to 55 lbs.)
176
g
/m
2
(65 lb.) paper,
to 12" x 18")
(Ordinary paper)
200
g
/m
2
(110 lb.)paper
●
For best results, use only paper recommended by SHARP.
Loading copy paper
“
OPEN TRAY AND ADD PAPER.
” will be displayed when there is
no copy paper in a selected paper feed station.
When a selected paper tray is not installed or is improperly installed,
“
When a selected paper tray is not installed or is improperly installed,
“
PUSH PAPER TRAY INTO MACHINE UNTIL IT LATCHES.
”
will be displayed. Install it or push it back firmly into place.
For best results, use only Sharp recommended paper.
For best results, use only Sharp recommended paper.
SUPPLIES
Paper
4-3
CHAPTER
4
SUPPLIES
Paper
Loading paper in the paper trays
1
Gently lift and pull out the paper tray.
2
Only use paper within the Sharp specification and
follow the paper manufacturer’s instructions regarding
fanning and loading the paper.
follow the paper manufacturer’s instructions regarding
fanning and loading the paper.
●
The tray holds 500 sheets of paper.
Do not load paper above the maximum height line.
Do not load paper above the maximum height line.
3
Push the paper tray firmly back into the copier.
PAPER
Maximum height line
4-4
CHAPTER
4
PAPER
Changing the copy paper size in the tray
1
Gently lift and pull out the paper tray until it stops.
2
Adjust the paper size indicator to match the paper size
to be set.
to be set.
●
Slide the paper size indicator to the right or left to match the paper
size.
size.
3
Adjust the front guide and left guide while squeezing
their lock levers.
their lock levers.
●
Slide the front and left guides to match the width and length of the
copy paper.
copy paper.
4
Load copy paper into the tray.
5
Place the paper size card in the front of the paper tray.
●
The paper size card has three faces. Fold the card properly to
show the selected paper size. The paper size indication which
shows through the slot on the front of the copier should match the
selected paper size.
show the selected paper size. The paper size indication which
shows through the slot on the front of the copier should match the
selected paper size.
6
Push the paper tray firmly back into the copier.
SUPPLIES
Paper
Paper size indicator
Left guide
Front guide
Maximum height line
Paper size card
Click on the first or last page to see other AR-C250 (serv.man6) service manuals if exist.